Valid

HG/T 3867-2008Vulcanized rubber - Determination of low temperature resistance coefficient in tension (English PDF)

硫化橡胶 拉伸耐寒系数的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3867-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 23, 2008

Implementation date

October 1, 2008

Scope

HG/T 3867-2008 is the English-translated version of 硫化橡胶 拉伸耐寒系数的测定.

HG/T 3867-2008 is the Chinese chemical industry standard covering vulcanized rubber - Determination of low temperature resistance coefficient in tension. It was issued on 23 April 2008 and has been in force since 1 October 2008, replacing HG/T 3867-2006.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — HG/T 3867-2008

National Standard of the People's Republic of China

Replacing
HG/T 3867-2006

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 3867-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.

It replaces the earlier edition HG/T 3867-2006.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

HG/T 3867-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,854 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

HG/T 3867-2026 (later edition)

HG/T 3867-2006 (earlier edition)

Standards on related subjects:

GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

HG/T 3866-2026 — Vulcanized rubber-Determination of coefficient of cold resistance under compression

HG/T 3863-2008 — Ebonite - Determination of crushing strength

5 Classification and status

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 3867

EditionTitleRevisionStatus
HG/T 3867-2008Vulcanized rubber - Determination of low temperature resistance coefficient in tensioncurrent editionCurrent
HG/T 3867-2006Vulcanized rubber - Determination of low temperature resistance coefficient in tensionprevious editionSuperseded

This page sells the current edition, HG/T 3867-2008. Earlier editions are listed for reference only.

How to Download HG/T 3867-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3867-2008

$105.00