HG/T 3054-2012Latex foam - Determination of linear dimensions (English PDF)
胶乳海绵线性尺寸测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3054-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 3054-2012 is the English-translated version of 胶乳海绵线性尺寸测定.
HG/T 3054-2012 is the Chinese standard "Latex foam - Determination of linear dimensions". Its scope clause reads: This standard specifies the latex sponge linear dimensions measured approach.
This standard applies to natural rubber latex, synthetic latex foam as the main raw material products, or linear dimensions of the sample measurements.
Found what you need?
Document preview — HG/T 3054-2012
National Standard of the People's Republic of China
- Replacing
- HG 3054-1988
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
1 Scope
This standard specifies the latex sponge linear dimensions measured approach.
This standard applies to natural rubber latex, synthetic latex foam as the main raw material products, or linear dimensions of the sample measurements.
Foreword
This document was issued on 28 December 2012 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 June 2013.
It replaces HG 3054-1988.
The document is under the responsibility of the Ministry of Industry and Information Technology.
About this edition
HG/T 3054-2012 is the current edition. It was issued on 28 December 2012 and has been in force since 1 June 2013, replacing HG 3054-1988.
HG 3054-1988 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
HG/T 3054-2012 replaces HG 3054-1988. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
HG/T 3054-2012 carries no ICS number in the official record.
The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is HG/T 3054-2012. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3054
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3054-2012 | Latex foam - Determination of linear dimensions | current edition | Current |
| HG 3054-1988 | Latex foam - Determination of linear dimensions | previous edition | Superseded |
This page sells the current edition, HG/T 3054-2012. Earlier editions are listed for reference only.
How to Download HG/T 3054-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 3054-2012
$115.00