Valid

HG/T 30031-2017Technical specification for production safety of anhydrous sodium sulfate (English PDF)

无水硫酸钠生产安全技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 30031-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 12, 2017

Implementation date

October 1, 2017

Scope

HG/T 30031-2017 is the English-translated version of 无水硫酸钠生产安全技术规范.

HG/T 30031-2017 is the Chinese standard "Technical specification for production safety of anhydrous sodium sulfate". Its scope clause reads: This standard stipulates the basic requirements for the production safety of anhydrous sodium sulfate after purification, evaporation, filtration, drying and packaging.

Found what you need?

Document preview — HG/T 30031-2017

National Standard of the People's Republic of China

Replacing
HGA/T 090-1983

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope

1 Scope

This standard stipulates the basic requirements for the production safety of anhydrous sodium sulfate after purification, evaporation, filtration, drying and packaging.

Foreword

This document was issued on 12 April 2017 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 October 2017.

It replaces HGA/T 090-1983.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

HG/T 30031-2017 is the current edition. It was issued on 12 April 2017 and has been in force since 1 October 2017, replacing HGA/T 090-1983.

HGA/T 090-1983 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG/T 30031-2017 replaces HGA/T 090-1983. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG/T 30031-2017 carries no ICS number in the official record.

The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is HG/T 30031-2017. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 30031

EditionTitleRevisionStatus
HG/T 30031-2017Technical specification for production safety of anhydrous sodium sulfatecurrent editionCurrent
HGA/T 090-1983Technical specification for production safety of anhydrous sodium sulfateprevious editionSuperseded

This page sells the current edition, HG/T 30031-2017. Earlier editions are listed for reference only.

How to Download HG/T 30031-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 30031-2017

$205.00