HG/T 30025-2018Technical code for safety of liquid chlorine production (English PDF)
液氯生产安全技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 30025-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 22, 2018
Implementation date
July 1, 2019
Scope
HG/T 30025-2018 is the English-translated version of 液氯生产安全技术规范.
HG/T 30025-2018 is the Chinese standard "Technical code for safety of liquid chlorine production".
Its scope clause reads: This standard specifies the safety requirements for liquid chlorine production materials, safety production regulations, safety technical regulations for electromechanical equipment, safety requirements for filling and management of liquid chlorine cylinder tank trucks, storage and transportation of liquid chlorine cylinders, and liquid chlorine storage tanks.
This standard is applicable to the chlorine gas produced by electrolytic sodium chloride solution.
Found what you need?
Document preview — HG/T 30025-2018
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
1 Scope
This standard specifies the safety requirements for liquid chlorine production materials, safety production regulations, safety technical regulations for electromechanical equipment, safety requirements for filling and management of liquid chlorine cylinder tank trucks, storage and transportation of liquid chlorine cylinders, and liquid chlorine storage tanks.
This standard is applicable to the chlorine gas produced by electrolytic sodium chloride solution.
Safety regulations for storage and use, labor protection and the working environment, and emergency response.
It adopts low pressure low temperature method, medium temperature medium pressure method or high temperature and high pressure method to prepare liquid chlorine and uses liquid chlorine to vaporize, compress air or use dynamic machinery (such as submerged pump, shield pump, etc.) Production of liquid chlorine (excluding refrigeration systems).
Foreword
This document was issued on 22 October 2018 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 July 2019.
It is the first edition of this standard.
About this edition
HG/T 30025-2018 is the first edition of this standard. It was issued on 22 October 2018 and has been in force since 1 July 2019.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite HG/T 30025-2018 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
HG/T 30025-2018 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite HG/T 30025-2018 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
HG/T 30025-2018 carries no ICS number in the official record.
The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is HG/T 30025-2018. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download HG/T 30025-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 30025-2018
$195.00