Valid

HG/T 20707-2014Standard for quality inspection and evaluation of geotechnical investigation results in the chemical industry (English PDF)

化工行业岩土工程勘察成果质量检查与评定标准

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for HG/T 20707-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

HG/T 20707-2014 is the English-translated version of 化工行业岩土工程勘察成果质量检查与评定标准.

HG/T 20707-2014 is the chemical industry standard for checking and rating the quality of geotechnical investigation results.

It sets the basis and the content of the quality inspection, the procedure to be followed, the qualifications required of the people who carry out the inspection and the evaluation, and the quality requirements the results are measured against.

It is written for the geotechnical investigation done for chemical industry projects and carries the classification P72. The investigation work itself follows the quoted standards GB 50021, GB/T 50123, GB/T 50266 and JGJ/T 87. Issued on 6 May 2014, it has applied since 1 October 2014.

Found what you need?

Document preview — HG/T 20707-2014

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 20707-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 20 pages in English translation.

2 Scope Preview

This standard is the chemical industry standard for checking and rating the quality of geotechnical investigation results. It sets the basis and the content of the quality inspection, the procedure to be followed, the qualifications required of the people who carry out the inspection and the evaluation, and the quality requirements the results are measured against. It is written for the geotechnical investigation done for chemical industry projects and carries the classification P72. The investigation work itself follows the quoted standards GB 50021, GB/T 50123, GB/T 50266 and JGJ/T 87.

HG/T 20707-2014 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB 50021

GB/T 50123

GB/T 50266

JGJ/T 87

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 20 pages

5 Related standards

Standards on related subjects:

HG/T 20513-2014 — Design code of instrument grounding

SH/T 3407-2013 — Spiral wound gaskets for steel pipe flanges in petrochemical industry

SH/T 3537-2009 — Technical specification for construction of vertical cylindrical low temperature storage tank

HG/T 20717-2019 — Geotechnical engineering investigation standards for contaminated sites

HG/T 20711-2019 — Code for design of heating, ventilation and air conditioning of chemical laboratories and testing rooms

HG/T 20709-2017 — Code for design of composite pile foundations

6 Classification and status

Chinese Standard Classification (CCS): P 10

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 20707-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 20707-2014

$355.00