HG/T 20553-2011Size selection series of seamless and welded steel pipes for chemical piping (English PDF)
化工配管用无缝及焊接钢管尺寸选用系列
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20553-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
June 1, 2011
Scope
HG/T 20553-2011 is the English-translated version of 化工配管用无缝及焊接钢管尺寸选用系列.
HG/T 20553-2011 is the Chinese standard "Size selection series of seamless and welded steel pipes for chemical piping". Its scope clause reads: This standard is formulated for the purpose of guiding the size selection of steel pipes in chemical piping design to achieve safety and usability, economic rationality and guaranteed quality.
This standard is applicable to steel pipe size selection in the construction of the constructed, renovated or extended chemical engineering. This standard is not applicable to size selection of the following steel pipes: 1 Steel pipes used for such chemical equipment (non-piping) as the heat exchanger pipe bundle.
2 Steel pipes specified in "General Design of High Pressure Pipe, Fitting, Gasket and Bolting" (H3-67). In addition to this standard, the size of steel pipes used for chemical piping shall also comply with the requirements of the relevant national standards.
Its clauses include general provisions; outside diameter & wall thickness of steel pipe.
Found what you need?
Document preview — HG/T 20553-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG 20553-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 General Provisions
- 2 Outside Diameter & Wall Thickness of Steel Pipe
- 3 Mass of Steel Pipe
- 1.0.3 This standard is not applicable to size selection of the following steel pipes:
- 2.0.2 Series Ia.
- 2.0.3 Series Ib.
- 2.0.4 Series II.
- 2.0.5 Selection of wall thickness.
1 General Provisions
1.0.1
This standard is formulated for the purpose of guiding the size selection of steel pipes in chemical piping design to achieve safety and usability, economic rationality and guaranteed quality.
1.0.2
This standard is applicable to steel pipe size selection in the construction of the constructed, renovated or extended chemical engineering.
1.0.3
This standard is not applicable to size selection of the following steel pipes:
1 Steel pipes used for such chemical equipment (non-piping) as the heat exchanger pipe bundle.
2 Steel pipes specified in "General Design of High Pressure Pipe, Fitting, Gasket and Bolting" (H3-67).
1.0.4
In addition to this standard, the size of steel pipes used for chemical piping shall also comply with the requirements of the relevant national standards.
2 Outside Diameter & Wall Thickness of Steel Pipe
2.0.1
This standard specifies three size series, i.e. Ia, Ib and II series.
2.0.2
Series Ia.
Series Ia is the preferred series and is the basic series of the steel pipes used for chemical piping; the outside diameter of steel pipes is equivalent to the one in ISO 4200: 1991 while the wall thickness is expressed by "Schedule Number" (Sch. No. for short) or wall thickness value.
Size and theoretical mass per unit length of DN6~DN600 steel pipes may adopt values according to these specified in Table 2.0.2-1. Wall thickness value of Schedule Number in the Table adopts the value given in ASME B36.10M-2004 and ASME B36.19M-2004 while through rounding, then, adopt the similar wall thickness value given in ISO 4200: 1991.
Size and theoretical mass per unit length of DN650~DN2000 large-diameter welded steel pipes may adopt values according to these specified in Table 2.0.2-2. Outside diameter and wall thickness values of steel pipes in the Table adopt the size in API Spec 5L-2004 while through rounding and shall meet the requirements of ISO 4200: 1991.
2.0.3
Series Ib.
Series Ib is the substitutive series of Series Ia. Outside diameter of steel pipes adopts the outside diameter of Series Ia through rounding and shall meet the outside diameter and wall thickness values of steel pipes specified in "Dimensions, Shapes, Masses and Tolerances of Seamless Steel Tubes" (GB/T 17395-2008).
Size and theoretical mass per unit length of steel pipes may adopt values according to these specified in Table 2.0.3.
2.0.4
Series II.
Series II is the carry-over series.
Size and theoretical mass per unit length of DN10~DN600 steel pipes may adopt values according to these specified in Table 2.0.4-1. Size of seamless steel pipes in the Table shall meet the requirements of "Dimensions, Shapes, Masses and Tolerances of Seamless Steel Tubes" (GB/T 17395-2008).
Size and theoretical mass per unit length of DN700~DN2000 large-diameter welded steel pipes may adopt values according to these specified in Table 2.0.4-2.
2.0.5
Selection of wall thickness.
Where selection of wall thickness mainly depends on internal pressure resistance under given conditions, the designer shall calculate the exact wall thickness value according to the specific requirements of codes for pressure pipeline and conditions required by the pipeline, and then select a wall thickness value which is suitable for the calculated value and is able to meet the pipeline required conditions from the tables listed in this standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 17395-2008Dimensions, shapes, masses and tolerances of steel tubes
- GB/T 21835-2008Dimensions and masses per unit length of welded steel pipes
ISO 4200-1991 · ISO 1127-1992
Cited by
Similar standards
Editions of HG/T 20553
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 20553-2011 | Size selection series of seamless and welded steel pipes for chemical piping | current edition | Current |
| HG 20553-1993 | Size selection series of seamless and welded steel pipes for chemical piping | previous edition | Superseded |
This page sells the current edition, HG/T 20553-2011. Earlier editions are listed for reference only.
How to Download HG/T 20553-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17395-2008 — Dimensions, shapes, masses and tolerances of seamless steel tubes
GB/T 21835-2008 — Dimensions and masses per unit length of welded steel pipes
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 20553-2011
$135.00