HB 7716.16-2022Spectral analysis method for chemical composition of titanium alloy - Part 16: Determination of platinum and palladium content by inductively coupled plasma atomic emission spectrometry (English PDF)
钛合金化学成分光谱分析方法 第 16 部分:电感耦合等离子体原子发射光谱法测定铂、钯含量
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HB 7716.16-2022 in 30 minutes.
Issued by
Ministry of Industry and Information Technology of the People's Republic of China
Level / Type
National · Mandatory
Issue date
April 8, 2022
Implementation date
October 1, 2022
Scope
HB 7716.16-2022 is the English-translated version of 钛合金化学成分光谱分析方法 第 16 部分:电感耦合等离子体原子发射光谱法测定铂、钯含量.
HB 7716.16-2022 is the Chinese standard "Spectral analysis method for chemical composition of titanium alloy - Part 16: Determination of platinum and palladium content by inductively coupled plasma atomic emission spectrometry".
This standard specifies the reagents, instruments, sampling and sample preparation, analysis steps, calculation of analysis results, tolerance and quality control and requirements for the determination of platinum and palladium content in titanium alloys by inductively coupled plasma atomic emission spectrometry.
This standard is applicable to the determination of platinum and palladium content in titanium alloys. The mass fraction range of the determination is: 0.01% ~ 0.50%.
It was issued by Ministry of Industry and Information Technology of the People's Republic of China. Issued on 2022-04-08, in force from 2022-10-01.
Found what you need?
Document preview — HB 7716.16-2022
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Terms
- 3 Terms and Definitions
- 4 Overview
- 4.1 General requirements
- 5 Technical Requirements
- 6 Calibration conditions
- 6.1 Environmental conditions
- 6.2 Measurement standards and other equipment
- 7 Calibration items and calibration methods
- 7.1 Calibration Items
- 7.2 Calibration method
- 8 Expression of calibration results
- 9 Recalibration interval
1 Foreword
HB 7716.16-2022 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 8 April 2022 and has been in force since 1 October 2022.
It is one of 3 parts of the HB 7716 series.
The HB prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
2 Scope Preview
This standard specifies the reagents, instruments, sampling and sample preparation, analysis steps, calculation of analysis results, tolerance and quality control and requirements for the determination of platinum and palladium content in titanium alloys by inductively coupled plasma atomic emission spectrometry. This standard is applicable to the determination of platinum and palladium content in titanium alloys. The mass fraction range of the determination is: 0.01% ~ 0.50%.
HB 7716.16-2022 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 171 other HB standards.
Of the 65 HB standards that do carry an ICS number, 65 (100%) fall under ICS 49, in the field of aircraft and space vehicle engineering.
3 About this standard
Sector: Aviation Industry Standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages (approximate)
4 Related standards
Other parts of this standard:
HB 7716.17-2022 — Spectral analysis methods for chemical composition of titanium alloys - Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry
HB 7716.18-2022 — Part 18: Determination of lithium and lead content by inductively coupled plasma atomic emission spectrometry
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
5 Classification and status
Prefix HB: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download HB 7716.16-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HB 7716.17-2022 — Spectral analysis methods for chemical composition of titanium alloys - Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry
HB 7716.15-2022 — Methods for spectrographic analysis of chemical composition of titanium alloys - Part 15: Determination of tungsten, niobium, tantalum and nickel contents by inductively coupled plasma atomic emission spectrometry
HB 7716.18-2022 — Spectral analysis method for chemical composition of titanium alloy - Part 18: Determination of lithium and lead content by inductively coupled plasma atomic emission spectrometry
HB 7716.16-2022
$120.00