Valid

GY/T 327-2019Technical specification of 10Gbps IP video broadcast for CATV network (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (36 pages)

Need quotation for your management?

Get a formal quotation for GY/T 327-2019 in 30 minutes.

Issued by

State Administration of Radio and Television

Level / Type

National · Recommended

Issue date

January 1, 1970

Implementation date

October 23, 2019

Scope

GY/T 327-2019 (Technical specification of 10Gbps IP video broadcast for CATV network) is available as an English-translated PDF.

GY/T 327-2019 — This standard specifies the composition, channel division, and coding standards of video and audio data for the cable-to-home fiber-to-the-home 10G unidirectional IP broadcast system.

Standards and technical requirements for packaging, broadcast service information, IP broadcast transmission systems, and IP broadcast receiving modules. This standard is applicable to the development, research, networking, operation, and management of cable-to-home fiber-to-the-home 10G unidirectional IP broadcast systems.

Found what you need?

Document preview — GY/T 327-2019

National Standard of the People's Republic of China

Classification
M 13

Issued by: State Administration of Radio and Television

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms, definitions, abbreviations and conventions
  • 3.1 Terms and definitions
  • 3.2 Acronyms
  • 3.3 Conventions
  • 4 10G unidirectional IP broadcast system composition
  • 4.1 Overview
  • 4.2 IP broadcast front-end
  • 4.3 IP Broadcast Transmission Network
  • 4.4 IP broadcast receiving module
  • 5 Broadcast service channel planning for 10G unidirectional IP broadcast system
  • 5.1 Channel division
  • 5.2 IP Encapsulation Specifications for Video and Audio Data Streams of Digital Video Broadcasting Services
  • 6 Digital TV service information of 10 Gigabit unidirectional IP broadcast system
  • 6.1 Introduction
  • 6.2 IP Broadcast Digital TV Service Information Sheet (BSI)
  • 6.3 IP Broadcast Digital TV Channel Information Table (MIT)
  • 6.4 IP Broadcast Digital Television Service Name List (SNLT)
  • 6.5 IP Broadcast Digital Television Area Code Table (ACT)
  • 6.6 Descriptors
  • 7 IP broadcast transmission network
  • 7.1 Protocol parameter requirements
  • 7.2 Physical layer rate requirements
  • 7.3 Composition of IP Broadcast Transmission Network and Equipment Requirements
  • 7.4 IP broadcast transmission security and quality requirements
  • 8 IP broadcast receiving module
  • 8.1 Overview
  • 8.2 10Gb Optical Receiver
  • 8.3 10 Gigabit IP Broadcast Strobe
  • Appendix A (Normative Appendix) IPv6 Multicast Address Planning Methods
  • A.1 Overview
  • A.2 Multicast Address Planning Methods
  • A.3 Examples of Multicast Addresses
  • Appendix B (Informative) Network Reconstruction Scheme for Bidirectional Networking (I-PON)
  • B.1 Regional DVB Broadcast Front End Transformation Scheme
  • B.2 Coexistence with Cable Users
  • Appendix C (informative) Example of two-way network integration application with G/EPON
  • C.1 Overview
  • C.2 General process of integration with G/EPON bidirectional network
  • C.3 Strategies for the realization of VOD interactive on-demand services
  • C.4 One of the strategies of the OTT Internet TV business implementation process
  • Appendix D (Normative) Descriptors in the case of IPv4
  • D.1 Overview
  • D.2 Definition of descriptors in the case of IPv4
  • D.3 IPv4 to IPv6 migration
  • References

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard is under the jurisdiction of the National Radio, Film and Television Standardization Technical Committee (SAC/TC 239).

This standard was drafted. State Radio and Television Research Institute of Radio and Television Science, Ji Shi Media Co., Ltd., Anhui Radio and Television Information Network Co., Ltd., Guangxi Radio and Television Information Network Co., Ltd., Beijing Jishi Huitong Technology Co., Ltd.

Introduction

The issuer of this document draws attention to the fact that when it declares compliance with this document, it may use relevant authorized and the following patents are applied for.

Serial number Chapter name Patent name 1 4.8.2 Optical fiber receiving device 2 8.3 Integrated circuits and data processing methods 3 4 Data sending front end in network data transmission system 4 8 Data receiving terminal in network data transmission system 5 7, 8 network data transmission system 6 4 Optical Transmission System the issuing authority of this document has no position on the authenticity, validity and scope of the patent.

The patent holder has assured the publisher of this document that he is willing to work with any applicant on reasonable and non-discriminatory terms and conditions, Negotiating patent licenses. The patent holder's statement has been filed with the issuing agency of this document, and relevant information can be obtained through the following link Ways to get.

Please note that in addition to the above patents, some content of this document may still involve patents. The issuer of this document is not responsible for identifying these Li's responsibility.

Technical Specifications for Fiber-to-the-Home 10G Unidirectional IP Broadcast System

1 Scope

This standard specifies the composition, channel division, and coding standards of video and audio data for the cable-to-home fiber-to-the-home 10G unidirectional IP broadcast system.

Standards and technical requirements for packaging, broadcast service information, IP broadcast transmission systems, and IP broadcast receiving modules.

This standard is applicable to the development, research, networking, operation, and management of cable-to-home fiber-to-the-home 10G unidirectional IP broadcast systems.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 17975.1-2010 Information technology. Universal coding of moving pictures and associated audio information. Part 1. System (ISO/IEC 13818-1.:2007, MOD) GB 18030-2005 Information Technology Chinese Coded Character Set GB/T 28161-2011 Digital TV Broadcasting Service Information Specification GB/T 28430-2012 Digital TV system data broadcasting technical specifications GY/T 306.1-2017 Technical Specifications for Cable-to-Home Fiber-to-the-Home System Part 1. General Technical Requirements China Radio and Television IPv6 Address Planning Plan (2018 Edition) (Guangdong Radio [2018] No. 45) IEEE 802.3ae-2002 Information technology and IEEE standard system communication and information exchange Seeking part 3. CSMA/CD access method and physical layer specification 10Gb/s Ethernet MAC parameters, physical layer and management parameters (IEEE Standard for Information Technology- Telecommunications and Information Exchange Between Systems- Local and Metropolitan Area Networks- Specific Requirements Part 3. Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment. Media Access Control (MAC) Parameters, Physical Layers, and Management Parameters for 10 Gb/S Operation) SFF INF-8077i Revision 4.5 10Gb Small Pluggable Module SFP Specification (10 Gigabit Small Form Factor Pluggable Module)

3 Terms, definitions, abbreviations and conventions

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1

Fiber to the home

In cable television networks or other networks, only the fiber-optic medium is used to connect the access network office and the home residential access method.

3.1.2

10Gbps unidirectional IP broadcast A kind of baseband IP stream broadcast based on 10 Gigabit Ethernet physical layer protocol implemented on optical distribution network.

3.1.3

IP broadcast channel Especially refers to the data channel identified by the class D IP address and the UDP destination port in the 10 Gigabit IP broadcast, usually each channel corresponds to a digital TV Transport stream or service stream.

3.1.4

Main channel

Broadcast service channel for transmitting digital television service index data.

3.2 Acronyms

The following abbreviations apply to this document.

ACT Area Code Table

BER Bit Error Rate

BSI Broadcast Service Information bslbf bit string (left bit first) DLT 10 Gigabit IP Broadcast Distribution Terminal (Distribution Line Terminal) DTT Date Time Table DVB Digital Video Broadcast EPG Electronic Program Guide EPON Ethernet Passive Optical Network HTML Hyper Text Markup Language HTTP Hyper Text Transfer Protocol ID (Identity) IEEE Institute of Electrical and Electronics Engineers IPv4 Internet Protocol, version 4 IPv6 Internet Protocol, version 6 GPON Gigabit-Capable Passive Optical Network MIT Channel Information Table MPEG Moving Pictures Expert Group MPTS Multi-program Transport Stream ONU Optical Network Unit OTT Internet TV (Over The Top) PID Packet Identifier PON Passive Optical Network rpchof remainder polynomial coefficients, highest order first SFP Small Form-factor Pluggable SI Service Information SNLT Service Name List Section Table SPTS Single Program Transport Stream SVT Service Version Table TS Transport Stream UDP User Datagram Protocol uimsbf unsinged integer, most significant bit first UTC Coordinated Universal Time VOD Video On Demand XML Extensible Markup Language

3.3 Convention

The following conventions apply to this document.

3.3.1 Version number

The version number is used to identify the version of this standard to support compatibility identification of the system. The current version number of this standard is 1.0.0, which is the major version the version number (versionMajor) is 1, the minor version number (versionMinor) is 0, and the micro version number (versionMicro) is 0.

3.3.2 Text Character Encoding

Unless otherwise specified, the text character encoding defaults to GB 18030-2005.

3.3.3 Reserved bits

Unless otherwise specified, all reserved bits in this standard shall be set to '1'.

4 10G unidirectional IP broadcast system

4.1 Overview

Cable TV network fiber-to-the-home 10G unidirectional IP broadcast system uses 1550nm wavelength to realize 10G IP data through optical power distribution Stream broadcast transmission. As shown in Figure 1, the 10G unidirectional IP broadcast system is mainly composed of the IP broadcast front end, IP broadcast transmission network and IP broadcast receiving module.

Partial composition. Among them, the business data is transmitted step by step from the national level service platform to the prefecture and city service platforms.

After adding local service data as required, the data is broadcast to each user terminal through the optical transmission network in the format of a UDP multicast message.

End, here the UDP multicast format multicast address and UDP port number are used to distinguish different digital TV programs in the broadcast data. The specific group See Appendix A for broadcast address planning. The 10 Gigabit unidirectional IP broadcast receiving module is usually located in the user access terminal system.

Broadcast UDP multicast packets, and select broadcast program streams based on their multicast addresses and port numbers.

IP broadcast transmission network City-level business platform IP broadcast front-end IP broadcast Receiving module IP broadcast Receiving module IP broadcast Receiving module National Business Platform Provincial Business Platform 10G unidirectional IP broadcast system

Figure 1 Composition of 10 Gigabit unidirectional IP broadcast system

The 10 Gigabit unidirectional IP broadcast optical network can form a single unidirectional broadcast system and operate independently to carry out television broadcast services, as shown in Figure 2.

It can also work with two-way transmission systems (EPON/GPON, etc.) to build a 10 Gigabit broadband access network, that is, I-PON solution, which supports the TV live broadcast industry.

Services and two-way interactive video and high-speed data services (VOD video on demand, OTT TV Internet TV and Internet access, etc.), as shown in Figure 3 as shown. Refer to Appendix B for the network reconstruction plan of bidirectional networking. See Appendix C for examples of G/EPON bidirectional network convergence applications. I-PON Code Type networking solutions include single-fiber three-wave networking and dual-fiber three-wave networking. For details, see GY/T 306.1-2017.

DVB platform

business platform

10 Gigabit IP

Broadcast distributor backbone ODN Optical Distribution Network IP Broadcast Receiving mode 10G broadcasting set-top box IP BOX/CPE

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.

Referenced standards

How to Download GY/T 327-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
36 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GY/T 327-2019

$944.00