GM/T 0114-2021Decoy-state BB84 quantum key distribution product test specification (English PDF)
诱骗态BB84量子密钥分配产品检测规范
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for GM/T 0114-2021 in 30 minutes.
Issued by
State Administration of Cryptography
Level / Type
National · Recommended
Issue date
October 18, 2021
Implementation date
May 1, 2022
Scope
GM/T 0114-2021 is the English-translated version of 诱骗态BB84量子密钥分配产品检测规范.
GM/T 0114-2021 — This document specifies the detection content and methods of the protocol implementation requirements and basic product requirements of the decoy-state BB84 quantum key distribution product, based on the use of weak coherent state light source.
This document is applicable to the detection of decoy-state BB84 quantum key distribution products, which are developed in accordance with GM/T 0108-2021; it can also be used to guide the development.
The system security based on quantum key distribution products and the security of their classical channel networks are not within the scope of this document.
Found what you need?
Document preview — GM/T 0114-2021
National Standard of the People's Republic of China
- ICS
- 35.030
Contents
- Scope1
- Normative references2
- Terms and definitions3
- Symbols4
- Test reference point5
- Basis (state) preparation detection environment topology diagram6
- Topology diagram of the other attribute preparation detection environment7
- Topology diagram of key attribute detection environment of detector8
- Topology diagram of remote management detection environment9
- Overview10
- Basis preparation11
- State preparation12
- Coding process13
- Detection of quantum state transmission process14
- Decoding process15
- Authentication testing16
- Interface detection17
- Detection of random number generator18
- Relative error of conjugation of measurement basis19
- Amplitudes of various quantum states in signal state20
- Laser injection attack protection21
- Protection against seed light injection attacks22
- Qualification judgment23
1 Scope
This document specifies the detection content and methods of the protocol implementation requirements and basic product requirements of the decoy-state BB84 quantum key distribution product, based on the use of weak coherent state light source.
This document is applicable to the detection of decoy-state BB84 quantum key distribution products, which are developed in accordance with GM/T 0108-2021; it can also be used to guide the development. The system security based on quantum key distribution products and the security of their classical channel networks are not within the scope of this document.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, for referenced documents with dates, only the version corresponding to that date applies to this document; for referenced documents without dates, the latest version (including all amendments) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products - Part 2: Test methods - Tests A. Cold GB/T 2423.2 Environmental testing for electric and electronic products - Part 2: Test methods - Tests B. Dry heat GB/T 5080.7 Equipment reliability testing - Compliance test plans for failure rate and mean time between failures assuming constant failure rate
3 Terms and definitions
The terms and definitions defined in GB/T 37092, GM/T 0050, GM/Z 4001 apply to this document.
Privacy amplification the process in which the transmitter and the receiver perform mathematical processing on the error-corrected key to extract the shared key from it.
BB84 protocol
A quantum key distribution protocol proposed by Charles Henry Bennett and Gilles Brassard in 1984.
Basis sifting
Also called sifting, it refers to the process in which the transmitter and receiver compare the basis vectors; both parties only retain the data that uses the same basis vectors in the measurement process of the receiver and the sending process of the transmitter.
Basis
A set of quantum states consisting of N complete orthogonal normalized quantum states in the N-dimensional Hilbert space.
4.1 Symbols
The following symbols apply to this document.
µ. Average number of photons in signal state light pulse
5.1 Test reference point
The reference configuration of the decoy-state BB84 quantum key distribution product is shown in Figure 1, where the QKD transmitter includes a light source, a decoy-state preparation module, a ground/state preparation module, a light intensity attenuation module, a random number generator, a transmitter control module, a synchronization signal transmission module, a negotiation signal transceiver module, a communication control interface module.
5.2.1.1 Basis (state) preparation detection environment topology diagram
Figure 2 shows the coding basis relative error detection environment of the phase-coded
quantum key distribution product, which is mainly composed of the QKD transmitter, circulator, single photon detector, reflector. If the QKD transmitter base/state preparation module adopts a single-mode Faraday-Michelson interferometer, the
5.2.1.3 Topology diagram of the other attribute preparation detection environment
Figure 8 is the detection environment for various quantum state amplitudes and pulse
widths, which is mainly composed of the QKD transmitter, the photoelectric converter, the oscilloscope. This detection environment is used for the detection of 6.1.1.5.
5.2.1.4 Topology diagram of key attribute detection environment of detector
Figure 11 is the detection environment of key attribute of detector, which is mainly
composed of narrow pulse light source, signal source, (QKD receiver) single photon detector, adjustable attenuator, pulse counter. It can perform detection efficiency half-width consistency detection, efficiency peak consistency detection, etc. This detection environment is used for the detection of 6.1.3.2.
5.2.2.4 Topology diagram of remote management detection environment
Figure 19 is the detection environment of remote management, which is mainly
composed of QKD transmitter, QKD receiver, detection PC. This detection environment is used for the detection of 6.2.6.
6.1.1.1 Overview
State description. Define the four quantum states of the two-dimensional Hilbert space as |phi1 >, |phi2 >, |Psi1 >, |Psi2 >.
6.1.1.2 Basis preparation
The purpose of the basis preparation test is to detect whether the two sets of bases prepared by the transmitter and the receiver meet the requirements of the decoy-state BB84 protocol. The basis preparation error detection includes the relative error detection of the conjugation of the encoding basis, the relative error detection of the conjugation of the measurement basis, the relative error detection of the encoding basis and the measurement basis.
6.1.1.3 State preparation
The purpose of state preparation detection is to detect whether the two quantum states of each group of bases prepared by the transmitter and the receiver meet the requirements of the decoy-state BB84 protocol.
6.1.1.6 Coding process
The purpose of the coding process detection is to detect whether the transmitter coding process meets the requirements of the decoy-state BB84 protocol.
6.1.2 Detection of quantum state transmission process
The purpose of the detection of quantum state transmission process is to detect whether the quantum state transmission process meets the requirements of the decoy-state BB84 protocol.
6.1.3.1 Decoding process
The purpose of the decoding process detection is to detect whether the decoding process of the receiver meets the requirements of the decoy-state BB84 protocol.
6.2.2 Authentication testing
The purpose of authentication testing is to detect the authentication mechanism used between the transmitter and the receiver of the quantum key distribution product, and between the quantum key distribution product and the shared key management system, management platform or management tool.
6.2.3 Interface detection
The purpose of interface detection is to detect whether the type and function of the interface of the quantum key distribution product meet the requirements of the quantum key distribution product.
6.2.4 Detection of random number generator
The purpose of random number generator detection is to detect whether the random number generator used in the quantum key distribution product meets the requirements of the quantum key distribution product.
7.1.1.2 Relative error of conjugation of measurement basis
Take the relative error detection of conjugation of measurement basis of phase-coded quantum key distribution product as an example.
7.1.4.1 Amplitudes of various quantum states in signal state
- Detection conditions. Quantum key distribution products shall have a mode for preparing signal state separately.
7.2.1.2 Laser injection attack protection
Detection method. See 7.2.1.1.
7.2.1.3 Protection against seed light injection attacks
Detection method. See 7.2.1.1.
8 Qualification judgment
If any of the test results listed in Chapter 7 are unqualified, the product shall be judged as unqualified.
GM/T 0114-2021
CRYPTOGRAPHIC INDUSTRY STANDARD ICS 35.030 L 80 Decoy-state BB84 quantum key distribution product test specification Issued on. OCTOBER 18, 2021 Implemented on. MAY 01, 2022 Issued by. State Cryptography Administration
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Symbols and abbreviations... 8
4.1 Symbols... 8
4.2 Abbreviations... 9
5 Detection environment... 9
5.1 Test reference point... 9
5.2 Detection environment... 10
6 Detection content... 19
6.1 Detection of protocol implementation requirements... 19
6.2 Detection of quantum key distribution product... 25
7 Detection method... 29
7.1 Protocol implementation requirements detection... 29
7.2 Anti-attack detection... 46
7.3 Detection of quantum key distribution product... 52
8 Qualification judgment... 57 Appendix A (Informative) Detection instruments... 58 References... 59
1 Scope
This document specifies the detection content and methods of the protocol implementation requirements and basic product requirements of the decoy-state BB84 quantum key distribution product, based on the use of weak coherent state light source.
This document is applicable to the detection of decoy-state BB84 quantum key distribution products, which are developed in accordance with GM/T 0108-2021; it can also be used to guide the development. The system security based on quantum key distribution products and the security of their classical channel networks are not within the scope of this document.
2 Normative references the contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, for referenced documents with dates, only the version corresponding to that date applies to this document; for referenced documents without dates, the latest version (including all amendments) applies to this document.
GB/T 2423.1 Environmental testing for electric and electronic products - Part 2: Test methods - Tests A. Cold GB/T 2423.2 Environmental testing for electric and electronic products - Part 2: Test methods - Tests B. Dry heat GB/T 5080.7 Equipment reliability testing - Compliance test plans for failure rate and mean time between failures assuming constant failure rate
3 Terms and definitions the terms and definitions defined in GB/T 37092, GM/T 0050, GM/Z 4001 apply to this document.
Privacy amplification the process in which the transmitter and the receiver perform mathematical processing on the error-corrected key to extract the shared key from it.
BB84 protocol
A quantum key distribution protocol proposed by Charles Henry Bennett and Gilles Brassard in 1984.
Basis sifting
Also called sifting, it refers to the process in which the transmitter and receiver compare the basis vectors; both parties only retain the data that uses the same basis vectors in the measurement process of the receiver and the sending process of the transmitter.
Basis
A set of quantum states consisting of N complete orthogonal normalized quantum states in the N-dimensional Hilbert space.
4 Symbols and abbreviations
4.1 Symbols
The following symbols apply to this document.
µ. Average number of photons in signal state light pulse
5 Detection environment
5.1 Test reference point the reference configuration of the decoy-state BB84 quantum key distribution product is shown in Figure 1, where the QKD transmitter includes a light source, a decoy-state preparation module, a ground/state preparation module, a light intensity attenuation module, a random number generator, a transmitter control module, a synchronization signal transmission module, a negotiation signal transceiver module, a communication control interface module.
5.2 Detection environment
5.2.1 Detection of protocol implementation requirements
5.2.1.1 Basis (state) preparation detection environment topology diagram
Figure 2 shows the coding basis relative error detection environment of the phase-coded
quantum key distribution product, which is mainly composed of the QKD transmitter, circulator, single photon detector, reflector. If the QKD transmitter base/state preparation module adopts a single-mode Faraday-Michelson interferometer, the
5.2.1.3 Topology diagram of the other attribute preparation detection environment
Figure 8 is the detection environment for various quantum state amplitudes and pulse
widths, which is mainly composed of the QKD transmitter, the photoelectric converter, the oscilloscope. This detection environment is used for the detection of 6.1.1.5.
5.2.1.4 Topology diagram of key attribute detection environment of detector
Figure 11 is the detection environment of key attribute of detector, which is mainly
composed of narrow pulse light source, signal source, (QKD receiver) single photon detector, adjustable attenuator, pulse counter. It can perform detection efficiency half-width consistency detection, efficiency peak consistency detection, etc. This detection environment is used for the detection of 6.1.3.2.
5.2.2.4 Topology diagram of remote management detection environment
Figure 19 is the detection environment of remote management, which is mainly
composed of QKD transmitter, QKD receiver, detection PC. This detection environment is used for the detection of 6.2.6.
6 Detection content
6.1 Detection of protocol implementation requirements
6.1.1 Quantum state preparation
6.1.1.1 Overview
State description. Define the four quantum states of the two-dimensional Hilbert space as |phi1 >, |phi2 >, |Psi1 >, |Psi2 >.
6.1.1.2 Basis preparation the purpose of the basis preparation test is to detect whether the two sets of bases prepared by the transmitter and the receiver meet the requirements of the decoy-state BB84 protocol. The basis preparation error detection includes the relative error detection of the conjugation of the encoding basis, the relative error detection of the conjugation of the measurement basis, the relative error detection of the encoding basis and the measurement basis.
6.1.1.3 State preparation the purpose of state preparation detection is to detect whether the two quantum states of each group of bases prepared by the transmitter and the receiver meet the requirements of the decoy-state BB84 protocol.
6.1.1.6 Coding process the purpose of the coding process detection is to detect whether the transmitter coding process meets the requirements of the decoy-state BB84 protocol.
6.1.2 Detection of quantum state transmission process the purpose of the detection of quantum state transmission process is to detect whether the quantum state transmission process meets the requirements of the decoy-state BB84 protocol.
6.1.3 Detection of quantum state measurement process
6.1.3.1 Decoding process the purpose of the decoding process detection is to detect whether the decoding process of the receiver meets the requirements of the decoy-state BB84 protocol.
6.2.2 Authentication testing the purpose of authentication testing is to detect the authentication mechanism used between the transmitter and the receiver of the quantum key distribution product, and between the quantum key distribution product and the shared key management system, management platform or management tool.
6.2.3 Interface detection the purpose of interface detection is to detect whether the type and function of the interface of the quantum key distribution product meet the requirements of the quantum key distribution product.
6.2.4 Detection of random number generator the purpose of random number generator detection is to detect whether the random number generator used in the quantum key distribution product meets the requirements of the quantum key distribution product.
7 Detection method
7.1 Protocol implementation requirements detection
7.1.1 Base preparation detection
7.1.1.2 Relative error of conjugation of measurement basis Take the relative error detection of conjugation of measurement basis of phase-coded quantum key distribution product as an example.
7.1.4 Detection of preparation of other properties
7.1.4.1 Amplitudes of various quantum states in signal state - Detection conditions. Quantum key distribution products shall have a mode for preparing signal state separately.
7.2.1.2 Laser injection attack protection Detection method. See 7.2.1.1.
7.2.1.3 Protection against seed light injection attacks Detection method. See 7.2.1.1.
7.2.2 Anti-decoding process attack detection
8 Qualification judgment If any of the test results listed in Chapter 7 are unqualified, the product shall be judged as unqualified.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.1Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 5080.7Equipment reliability testing. Compliance test plans for failure rate and mean time between failures assuming constant failure rate
How to Download GM/T 0114-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.1-1989 — Basic environmental testing procedures for electric and electronic products - Tests A: Cold
GB/T 2423.1-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GM/T 0114-2021
$485.00