GM/T 0077-2019Cryptography tecyhnical requirements for core banking systems (English PDF)
银行核心信息系统密码应用技术要求
This is a limited preview
Buy now to download the full PDF (60 pages)
Need quotation for your management?
Get a formal quotation for GM/T 0077-2019 in 30 minutes.
Issued by
State Administration of Cryptography
Level / Type
National · Recommended
Issue date
July 12, 2019
Implementation date
July 12, 2019
Scope
GM/T 0077-2019 is the English-translated version of 银行核心信息系统密码应用技术要求.
GM/T 0077-2019 — Cryptography tecyhnical requirements for core banking systems
Found what you need?
Document preview — GM/T 0077-2019
National Standard of the People's Republic of China
- ICS
- 35.040
Contents
- Basic Requirements and Functional Requirements for Cryptographic1
- Level-3 Requirements for Cryptographic Technical Security Protection of Core2
- General rules3
- Cryptographic hardware security4
- Physical environmental security5
- Electronic access control system6
- Audit record7
- General rules8
- Audit record9
- Access control10
- Cryptographic module11
- Cryptographic algorithm allocation12
- Cryptographic protocol application13
- Cryptographic device application14
- Key import and export15
- Key usage and replacement16
- Key archive and destruction17
- Requirements for cryptography-using business terminal18
- Electronic access control system19
- Identity authentication20
6 Basic Requirements and Functional Requirements for Cryptographic
Application... 11
7 Level-3 Requirements for Cryptographic Technical Security Protection of Core
Banking Information System... 11
8 Four-level Requirements for Cryptographic Technical Security Protection of Core Banking Information System... 33 Appendix A (normative) Security Requirements Comparison Table... 58 Bibliography... 60 Cryptography Technical Requirements for Core Banking Systems
1 Scope
On the basis of GM/T 0054-2018 and JR/T 007-2012 (TRANSLATOR NOTE: it should be JR/T 0071-2012), this Standard integrates the characteristics of the core systems of banking financial institutions and the application demands of cryptographic technique in the security construction of this type of classified information system protection. From three perspectives, namely, cryptographic security technical requirements, key security and management requirements, security management requirements, specific requirements are put forward for the application of cryptographic technique in the core systems with different security protection levels.
This Standard is applicable to the guidance, standardization and evaluation of the core information systems of banks and financial institutions.
2 Normative References the following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 20547.2-2006 Banking - Secure Cryptographic Devices (retail) - Part 2: Security Compliance Checklists for Devices Used in Financial Transactions GB/T 21078.1 Banking - Personal Identification Number Management and Security -Part 1: Basic Principles and Requirements for Online PIN Handling in ATM and POS Systems GB/T 21079.1 Banking - Secure Cryptographic Devices (retail) - Part 1: Concepts, Requirements and Evaluation Methods GM/T 0024 SSL VPN Specification GM/T 0028 Security Requirements for Cryptographic Modules GM/T 0036-2014 Technical Guidance of Cryptographic Application for Access Control Systems Based on Contactless Smart Card GM/T 0054-2018 General Requirements for Information System Cryptography Application
7.2.1.1 General rules
Take the general rules of cryptographic application in physical and environmental security in GM/T 0054-2018 as a reference.
7.2.1.2 Cryptographic hardware security
"Cryptographic hardware security", "physical environmental security" and "electronic access control system" are the constituent parts of "physical and environmental security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "physical and environmental security - cryptographic hardware security" indicator:
a) The system's dedicated hardware or firmware and cryptographic device shall have effective physical security protection measures;
NOTE: in this Standard, "effective measures" refer to the means that can meet the requirements of the "ensured items" or the method that can achieve the security goals set by the system, the same below.
b) The system's dedicated hardware or firmware and cryptographic device shall satisfy operating environment reliability requirements.
7.2.1.3 Physical environmental security
"Cryptographic hardware security", "physical environmental security" and "electronic access control system" are the constituent parts of "physical and environmental security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "physical and environmental security - physical environmental security" indicator:
The authenticity function of cryptographic technique shall be used to protect the identity authentication information of physical access control and ensure the authenticity of the identity of personnel entering important areas.
7.2.1.4 Electronic access control system
"Cryptographic hardware security", "physical environmental security" and "electronic access control system" are the constituent parts of "physical and environmental security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following
e) Cryptographic technique shall be adopted to establish a secure information transmission channel, so as to perform centralized management of the security device or security components in the network.
7.2.2.5 Audit record
"Communication security", "identity authentication", "secure access path" and "audit record" are the constituent parts of "network and communication security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "network and communication security - audit record" indicator:
The integrity service of cryptographic technique shall be adopted to protect the integrity of audit record. It shall be ensured that its cryptographic function is correct and effective.
7.2.3.1 General rules
Take the general rules of cryptographic application in device and computational security in GM/T 0054-2018 as a reference.
7.2.3.2 Audit record
"Audit record", "identity authentication", "access control" and "cryptographic module" are the constituent parts of "device and computational security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "device and computational security - audit record" indicator:
a) The scope of audit shall cover every operating system user and database user on the server and important client-sides;
b) The integrity service of cryptographic technique shall be adopted to implement the integrity verification of audit records; it shall be ensured that its cryptographic function is correct and effective;
c) The integrity function of cryptographic technique shall be adopted to protect the integrity of log records;
d) Audit content shall include important security-related events in the system, such as: important user behavior, abnormal use of system resources, and the use of important system commands, etc.;
e) Audit record shall include date and time, type, subject identification, object identification and event result, etc.
7.2.3.4 Access control
"Audit record", "identity authentication", "access control" and "cryptographic module" are the constituent parts of "device and computational security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "device and computational security - access control" indicator:
a) From the perspective of access control mechanism, in order to prevent system resource access control information from being tampered with, the integrity service of cryptographic technique shall be adopted to implement the integrity protection of system resource access control information and sensitive marks; it shall be ensured that its cryptographic function is correct and effective;
b) In accordance with the role assignment permissions of user being managed, implement the separation of permissions of the user being managed, and merely grant the minimum permission required by the user;
c) Trusted computing technology shall be adopted to establish a chain of trust from the system to the application, so as to implement protection of the integrity of important programs or files during system operation.
7.2.3.5 Cryptographic module
"Audit record", "identity authentication", "access control" and "cryptographic module" are the constituent parts of "device and computational security" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "device and computational security - cryptographic module" indicator:
Level-3 and above cryptographic modules that comply with GM/T 0028, or hardware cryptographic products approved by the national cryptographic management department should be adopted to implement cryptographic operation and key management:
a) Dedicated hardware or firmware of the system, and cryptographic device shall implement security functions, such as: authorized control, detection of unauthorized access and indication of operation status, so as to ensure that the cryptographic module can correctly operate in the approved working mode;
b) Dedicated hardware or firmware of the system, and cryptographic device shall be able to prevent unauthorized disclosure of the module's content or key security parameters;
c) Dedicated hardware or firmware of the system, and cryptographic device shall requirements are made for the "application and data security - data storage" indicator:
a) The integrity service of cryptographic technique should be adopted to implement the detection of integrity of system management data, authentication information and important business data during the storage process; it shall be ensured that its cryptographic function is correct and effective;
b) The confidentiality service of cryptographic technique should be adopted to implement the confidentiality protection of the storage of system management data, authentication information and important business data; it shall be ensured that its cryptographic function is correct and effective.
7.2.5.1 Cryptographic algorithm allocation
"Cryptographic algorithm allocation", "cryptographic protocol application" and "cryptographic device application" are the constituent parts of "requirements for cryptographic allocation policy" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "requirements for cryptographic allocation policy - cryptographic algorithm allocation" indicator:
Algorithms approved by the national cryptographic management department shall be used.
7.2.5.2 Cryptographic protocol application
"Cryptographic algorithm allocation", "cryptographic protocol application" and "cryptographic device application" are the constituent parts of "requirements for cryptographic allocation policy" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "requirements for cryptographic allocation policy - cryptographic protocol application" indicator:
Cryptographic protocol that has passed the security review of the national cryptographic management department shall be adopted to implement the cryptographic function.
7.2.5.3 Cryptographic device application
"Cryptographic algorithm allocation", "cryptographic protocol application" and "cryptographic device application" are the constituent parts of "requirements for cryptographic allocation policy" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "requirements for cryptographic allocation
--- The continued usage of keys being suspected of leaking shall be prevented.
7.3.3.1 Key import and export
"Key import and export", "key storage and custody", "key usage and replacement", "key backup and recovery" and "key archive and destruction" are the constituent parts of "key management" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "key management - key import and export" indicator:
a) Key injection shall be performed in the presence of key administrators, security auditors and cryptographic device operators. Security auditors should also be present and record the operation memorandum, submit security audit logs and security audit documents, etc.;
b) The key transmission, import and export process shall be carried out in accordance with the principle of dual control and key division. If key component is required, then, the required key component shall be respectively imported by the holder of the key component;
c) When transmitting and importing keys, the follows shall be confirmed:
---Only when the cryptographic device has authenticated the identity of at least two authorized persons, for example, through the mode of password, can the private key be transmitted; in terms of manually distributed key, the management process shall be used, for example, through the mode of paper authorized, to authenticate the identity of the authorized persons;
---Only when it can be ensured that the cryptographic device has not been tampered in a way that might lead to the disclosure of keys or sensitive data before using it, can the private key be imported into the cryptographic device;
---Only when it can be ensured that there is no eavesdropping device installed at the interface of the cryptographic device that might cause the leakage of any element of the transmission key, can the private key be transmitted between cryptographic devices;
---The device used to transmit private key between the device that generates the key and the device that uses the key shall be cryptographic device;
---After importing the key to the target device, the key transmission device shall not retain any information that might reveal the key;
indicator:
a) Documented regulations for key storage and custody shall be formulated;
b) Key information must be kept in a safety box. The key to the safety box shall be the responsibility of the key administrator, so as to ensure that only the designated key administrator can open the device in custody; in addition, this regulation shall be implemented in the post responsibility system; the implementation of this regulation shall be regularly examined;
c) Passwords can only be stored in cryptographic device that complies with the stipulations of GB/T 20547.2;
d) If key components are used, it shall be ensured that the key components are transmitted to the authorized person through a specific key mailer or key transmission device. The printing of the key miler shall ensure that the key components can only be seen after the mailer is opened. The mailer shall merely show the minimum information necessary to deliver the key mailer to the authorized person. The structure of the key mailer shall make accidental or deceptive opening easy to be found by the recipient. If this circumstance occurs, the key components shall not be used anymore;
e) There shall be emergency treatment and response measures in case of possible leakage of the key;
f) Documented regulations for key storage and custody shall be formulated.
Requirements shall be proposed for the key storage location, transmission mode, transmission medium, and import and export process, as well as the personnel and responsibilities in the post of custody; in addition, the implementation of this regulation shall be regularly examined;
g) Plaintext keys can only be stored in cryptographic device that complies with the stipulations of GB/T 21079.1 and GB/T 20547.2.
7.3.3.3 Key usage and replacement
"Key import and export", "key storage and custody", "key usage and replacement", "key backup and recovery" and "key archive and destruction" are the constituent parts of "key management" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "key management - key usage and replacement" indicator:
a) The purpose of the key shall be clarified; in addition, the key shall be correctly used in accordance with the purpose;
b) A tracking and verification system shall be established for each link of key
d) Key backup or recovery shall be recorded; audit information shall also be generated; audit information includes the subject of backup or recovery, and the time of backup or recovery, etc.;
e) There shall be security measures to prevent the leakage and replacement of keys;
f) The security of the location and form of key storage shall be ensured; the access permissions of the key shall be restricted;
g) In accordance with the information that the attacker has obtained, if it can be confirmed that unauthorized key replacement has already occurred, then, the following steps shall be followed for key replacement:
---Erase any encrypted version of the storage key that has been confirmed to be replaced; confirm whether all existing encrypted keys are legal. If there is an illegal key, then, it shall be deleted;
---Use a certain new key encryption key to re-encrypt legally stored encrypted key;
---Delete the old key encryption key from all operating positions;
h) Key backup or recovery shall be recorded; audit information shall be generated; audit information includes the subject of backup or recovery, and the time of backup or recovery, etc.
7.3.3.5 Key archive and destruction
"Key import and export", "key storage and custody", "key usage and replacement", "key backup and recovery" and "key archive and destruction" are the constituent parts of "key management" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "key management - key archive and destruction" indicator:
a) Effective security measures shall be adopted to ensure the security and correctness of the archived keys;
b) The archived keys can only be used to decrypt the historical information encrypted by the key, or verify the historical information signed by the key;
c) Key archive shall be recorded; audit information shall be generated; audit information includes the archived keys and the time of archive, etc.;
d) Implement data backup on the archived keys;
requirements" are the constituent parts of "requirements for security management" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "requirements for security management - cryptographic device management" indicator:
a) The system shall establish an effective security management system for cryptographic device;
b) The system shall adopt cryptographic products approved by the national cryptographic management department;
c) Cryptographic device operators shall go through specialized trainings and assessments;
d) The system shall be equipped with dedicated cryptographic device maintenance personnel and management personnel.
7.4.5 Requirements for cryptography-using business terminal
"Security management system", "personnel management requirements", "cryptographic device management" and "cryptography-using business terminal requirements" are the constituent parts of "requirements for security management" of the core banking system. In Level-3 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "requirements for security management - cryptography-using business terminal requirements" indicator:
a) The terminal device cryptographic module shall comply with the relevant regulations and standards of the national cryptographic management department and the industrial authorities;
b) The terminal device shall pass the test, and meet the basic functions and performance requirements of cryptographic operation;
c) The operation of keys and passwords of the terminal device shall comply with the operating manual and operating procedures;
d) When terminal device is scrapped, in accordance with the cryptographic terminal device scrapping procedures, keys stored in the device shall be deleted and destructed; the cryptographic application-related software on the terminal shall be destructed and the destruction record shall be kept.
The authenticity function of cryptographic technique shall be used to protect the identity authentication information of physical access control and ensure the authenticity of the identity of personnel entering important areas.
8.2.1.4 Electronic access control system
"Cryptographic hardware security", "physical environmental security" and "electronic access control system" are the constituent parts of "physical and environmental security" of the core banking system. In Level-4 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "physical and environmental security - electronic access control system" indicator:
a) In the electronic access control system, the integrity service of cryptographic technique shall be used to ensure the integrity of the electronic access control system's entry and exit records; it shall be ensured that its cryptographic function is correct and effective;
b) The access control system requires that the card-reading mode should be non-contact, and the use of magnetic stripe cards should be avoided;
c) When the access control system detects an unrecognized card attempting to illegally enter, it shall provide a warning message and shall be able to locate the illegally attempting card;
d) The qualification, architecture and deployment of the adopted access control system shall comply with the technical specifications required by GM/T 0036-2014;
e) Corresponding rules and regulations shall be formulated to ensure the compliance, correctness and effectiveness of the application of the access control system;
f) It shall be ensured that the identity authentication information of personnel entering important areas cannot be tampered with; the integrity service of cryptographic technique shall be used to ensure the integrity of entry and exit records; it shall be ensured that the cryptographic function is correct and effective;
g) To enter the computer room area, except for the use of induction card, it is also necessary to adopt the thermal fingerprint verification system to rigorously control the access of irrelevant personnel; the access control system shall be equipped with alarms for illegal intrusion, excessive opening time and broken glass, and the anti-return function. In order to coordinate the anti-return function, the computer rooms shall all be equipped with microwave and passive infrared mobile alarms. When all the legally authorized persons provide evidences of original data issuance and data reception, so as to implement the non-repudiation of original data issuance and data reception behavior; it shall be ensured that its cryptographic function is correct and effective;
e) For systems that provide services to the outside world through the Internet, in terms of the entire message or conversation process during the communication, the mode of dedicated communication protocol or encryption shall be adopted to ensure the confidentiality of the communication process;
f) The secure channel transmission protocol (SSL / TLS, and shall comply with the requirements of GM/T 0024) of transaction information shall be used for encrypted transmission;
g) When establishing a secure communication transmission path, the authenticity service of cryptographic technique shall be used to implement identity authentication of the communication subject; it shall be ensured that its cryptographic function is correct and effective.
8.2.2.3 Identity authentication
"Communication security", "identity authentication", "secure access path" and "audit record" are the constituent parts of "network and communication security" of the core banking system. In Level-4 requirements of cryptographic technical security protection of the core banking information system, the following requirements are made for the "network and communication security - identity authentication" indicator:
a) When authenticating the identity of users logging in network devices, in order to prevent the authentication information from being reused or counterfeited, the authenticity service of cryptographic technique shall be adopted to protect the authentication information from reuse and counterfeiting; it shall be ensured that its cryptographic function is correct and effective;
b) In the execution of remote network management, in order to prevent the authentication information from being leaked during the transmission process, the confidentiality service of cryptographic technique shall be adopted to protect the confidentiality of the authentication information; it shall be ensured that its cryptographic function is correct and effective;
c) The network device system management of user identification shall have the characteristic of not easy to be fraudulently used. The static password of key network device shall be more than 10 digits, and consist of a combination of letters, numbers and symbols, which shall be regularly replaced;
d) For entities that have passed the identity authentication, the information system shall adopt cryptographic technique to generate a unique random prevent the authentication information from being eavesdropped during network transmission;
j) Two or more combined authentication techniques should be adopted to perform identity authentication of the user being managed. In addition, at least one kind of the identity authentication information shall be not easy to forge.
For example, key certificate, dynamic password card and biometric chara...
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 60 pages — is available in the English PDF.
How to Download GM/T 0077-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GM/T 0001.4-2024 — Zu Chongzhi's Sequence Cipher Algorithm Part 4: Authentication Encryption Mechanism
GM/T 0028-2024 — Security requirements for cryptographic modules
GM/T 0039-2024 — Security Test Requirements for Cryptographic Modules
GM/T 0077-2019
$405.00