Valid

GM/T 0066-2019Implementation guide to capability construction criteria of production and guarantee for commercial cryptographic products (English PDF)

商用密码产品生产和保障能力建设实施指南

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GM/T 0066-2019 in 30 minutes.

Issued by

State Administration of Cryptography

Level / Type

National · Recommended

Issue date

July 12, 2019

Implementation date

July 12, 2019

Scope

GM/T 0066-2019 is the English-translated version of 商用密码产品生产和保障能力建设实施指南.

GM/T 0066-2019 — This standard specifies the methods, procedures, reports and key points for the implementation of the evaluation of capability criteria of production and guarantee for commercial cryptographic products.

This standard is applicable to the guide for construction of production capacity, quality assurance capability, security assurance capability, service assurance capability of production organizations.

Found what you need?

Document preview — GM/T 0066-2019

National Standard of the People's Republic of China

ICS
35.040

Contents

  • Scope1
  • Normative references2
  • Terms and definitions3
  • Formal examination4
  • Substantive examination5
  • Evaluation content6
  • Evaluation method7
  • Evaluation principles8
  • Legal personality9
  • Product research & development10
  • Key personnel information11
  • Data management12
  • Position setting13
  • Production technology management14
  • Mass production and testing capabilities15
  • Quality system certification16
  • Evaluation requirements17
  • Evaluation process18
  • Material review19
  • Evaluation start20
  • Pre-evaluation21
  • Audit judgment22
  • Audit notice23
  • Audit method24
  • Expert evaluation25
  • Evaluation results26
  • Report content27
  • Report form28
  • Evaluation time29
  • Evaluation location30
  • Evaluation team and evaluation supervisor31
  • Basic information of production organization32
  • Description of declaration item33
  • Description of evaluation items34
  • Report archiving35
  • Evaluation process36
  • Expert scoring37
  • License requirements for different levels of commercial38
  • Description of special application requirements39
  • Capacity building40
  • Self-evaluation41

1 Scope

This standard specifies the methods, procedures, reports and key points for the implementation of the evaluation of capability criteria of production and guarantee for commercial cryptographic products.

This standard is applicable to the guide for construction of production capacity, quality assurance capability, security assurance capability, service assurance capability of production organizations.

2 Normative references

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this standard.

GM/T 0008-2012 Cryptography test criteria for security IC GM/T 0028-2014 Security requirements for cryptographic modules GM/T 0065-2019 Specification for capability construction of production and guarantee for commercial-cryptographic products GM/Z 4001 Cryptographic terms

3 Terms and definitions

The terms and definitions as defined in GM/Z 4001 and GM/T 0065-2019 as well as the following terms and definitions are applicable to this document.

3.1 Formal examination

Review the formal compliance, completeness and validity of the application materials as submitted by the production organization.

3.2 Substantive examination

On the basis of formal review, whether the production organization has the qualifications for the main body, whether the application is true, whether the submitted documents and certificates are true, valid, complete, compliant; whether they meet the requirements of national laws and regulations.

4.1 Evaluation content

The evaluation content includes evaluation elements such as basic items, declaration items, evaluation items, etc.

4.2 Evaluation method

The production and guarantee capabilities of commercial cryptographic products are evaluated by a combination of the organization��s self-evaluation and expert scoring. Quality assurance, security assurance, service guarantee capabilities shall be the organization's self-verification items, for which the production organization provides proofs of the production and guarantee capability of the commercial cryptographic product. Combined with the basic items and declaration items of the production organization, the expert group will score and judge according to the evaluation elements of the evaluation items.

4.3 Evaluation principles

The evaluation of the production and guarantee capabilities of commercial cryptographic products shall be based on the application materials submitted by the production organization, using a combination of "material review" and "on-site review", a combination of "pre-evaluation" and "expert evaluation";

follow the evaluation principles of "quantitative evaluation" and "qualitative judgment", to ensure the authenticity, consistency and compliance of the application materials.

5.1.1 Legal personality

The production organization is an independent legal person registered in China.

It shall issue the registration number of the business license of the production organization. It shall issue the name and number of the valid ID of the legal representative.

5.1.3 Product research & development

The production organization shall promise that the products researched & developed and the core cryptographic technology involved in the product have independent intellectual property rights; it shall have patents, software copyrights, integrated circuit layout registration, etc. It shall promise that the product corresponding to the application evaluation material does not contain the intellectual property of any other organization or unit; or otherwise it may have been obtained through legal means.

5.2.1 Key personnel information

The production organization shall provide a detailed introduction of the key personnel��s certificate name and number, nationality, educational background and working experience.

5.2.3 Data management

The production organization shall provide a statement on the location of the data center for the research & development, production and guarantee of commercial cryptographic products, stating the location of the data center and whether the data flow will involve outbound.

5.3.1.2.1 Position setting

The production organization shall set up production supervisors, warehouse management and other related positions; ensure that senior professionals with rich experience and serious responsibility hold relevant positions.

5.3.1.4.1 Production technology management

The production organization shall have management specifications and complete production technical documents, including at least production lists, material lists, inspection procedures and report documents.

5.3.1.4.2 Mass production and testing capabilities

The production organization shall have mass production and testing capabilities;

it should have an automated production line and corresponding product testing mechanisms, to ensure sufficient production capacity and stable product quality.

It shall have the required inspection, testing and measurement equipment, to meet the needs of the production scale.

5.3.2.4 Quality system certification

The third-party quality system certification of the production organization shall be verified. For the production organization that has obtained the corresponding certification and is within the validity period, it may score the quality assurance capability evaluation, for example, the production organization has ISO 9001 quality system certification or CMMI level 3 and above maturity certification.

6.1 Evaluation requirements

According to the requirements of GM/T 0065-2019 and 4.3, the evaluation is based on the application materials submitted by the production organization.

Conduct formal review and substantive review of application materials; initiate on-site review when necessary.

6.2 Evaluation process

The evaluation process is as shown in Figure 1.

6.3.1 Material review

After receiving the evaluation application materials submitted by the production organization, it shall carry out formal examination of the application materials Evaluation

6.3.2.1 Evaluation start

The evaluation team leader shall be determined, as well as two or more experts shall form the evaluation team. The number of the evaluation team members shall be no less than 3.The members of the evaluation team shall undertake the confidentiality of the evaluation object and evaluation content.

Independent evaluation supervisors shall be set up, to supervise the standardization and fairness of the evaluation work.

6.3.2.2 Pre-evaluation

The evaluation team conducts pre-evaluation of the application materials, mainly to review the basic items, declaration items and other content and supporting documents.

6.3.3 On-site audit

6.3.3.1 Audit judgment

The evaluation team shall judge whether on-site audits are required according to the specific conditions of the production organization. If the authenticity of the application materials is lack of supporting evidence, the application conditions are poor, the production organization has been subjected to relevant administrative penalties, it shall carry out an on-site audit.

6.3.3.2 Audit notice

If an on-site audit of the production organization is required, preliminary contact shall be made with the production organization on the implementation of the on-site audit. The initial contact includes at least the following tasks.

6.3.3.3 Audit method

The on-site audit shall check the authenticity and validity of the application materials. During the audit process, appropriate sampling shall be used to collect and verify information related to the audit objectives, scope and GM/T 0065-2019, including relevant information on organizational functions, production and R&D activities and processes.

6.3.4 Expert evaluation

The evaluation team shall establish a score sheet based on the evaluation items, to verify and score the production organization's product production and guarantee capabilities.

The evaluation team experts shall complete the scoring independently.

6.3.5 Evaluation results

The evaluation results are presented in the form of evaluation reports. The evaluation team shall provide a unified evaluation conclusion.

7.1 Report content

The content of the report shall be complete, truthful, objective; clarify the basic information of the production organization, the basic information of the applied product, the evaluation team members, the evaluation supervisor, the evaluation time, whether the evaluation materials are complete, whether the basic items meet the requirements, whether there will be on-site audit, the descriptions on declaration items and evaluation items, the evaluation conclusions.

7.2 Report form

The evaluation report is in the form of a table, as shown in Appendix B.

7.3.1 Evaluation time

The evaluation report shall specify the time when the evaluation work is started, in the format of "��������year����month����day".

7.3.2 Evaluation location

The evaluation report specifies the location of the evaluation.

7.3.3 Evaluation team and evaluation supervisor

The evaluation report clearly specifies the name of the evaluation team and the evaluation supervisor.

7.3.4 Basic information of production organization

The evaluation report shall specify the name of the production organization, its type, the province (district, city) to which it belongs, wherein the name and type of the production organization shall be filled out in accordance with its business license.

7.3.8 On-site audit

It shall clarify whether on-site audit is to be made; the clarification method is to choose "Yes" or "No".

7.3.9 Description of declaration item

It shall refer to the description in 5.2, to clarify the key personnel of the production organization, the nature of the enterprise, the data management information.

7.3.10 Description of evaluation items

It shall refer to the descriptions in 5.3 and 8.1.2, to clarify the scores of the production organization's production capability, quality assurance capability, security guarantee capability, service assurance capability.

7.4 Report archiving

The evaluation materials shall be archived. The archived materials include product varieties and model application materials, evaluation reports, evaluation records. See Appendix D.

Evaluation records include independent score sheets of evaluation members and records of supervisors, etc.

8.1.1 Evaluation process

The evaluation work shall be carried out in accordance with the evaluation procedures as specified in Chapter 6, including material review, pre-evaluation, on-site audit, expert evaluation.

8.1.2 Expert scoring

Expert evaluation is carried out by means of scoring. The scoring results include individual score and comprehensive score.

8.1.3 License requirements for different levels of commercial

cryptographic products the production and guarantee capabilities of commercial cryptographic products shall be compatible with the security level of commercial cryptographic products.

8.1.4 Description of special application requirements

Table 3 shows the situations where the production organization, research

organization, processing organization are not the same organization (enterprise, institution).

8.2.1 Capacity building

The production organization shall refer to the requirements of this standard when implementing production and guarantee capability building.

8.2.2 Self-evaluation

The production organization shall conduct self-evaluation according to GM/T 0065-2019; make continuous improvement based on the self-evaluation results.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

How to Download GM/T 0066-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GM/T 0066-2019

$285.00