Valid

GH/T 1467-2024Technical Guide for Resource Utilization of Waste Polyurethane Foam Plastics (English PDF)

废弃聚氨酯泡沫塑料资源化利用技术指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GH/T 1467-2024 in 30 minutes.

Issued by

All-China Federation of Supply and Marketing Cooperatives

Level / Type

National · Recommended

Issue date

October 29, 2024

Implementation date

May 1, 2025

Scope

GH/T 1467-2024 is the English-translated version of 废弃聚氨酯泡沫塑料资源化利用技术指南.

GH/T 1467-2024 is the Chinese standard "Technical Guide for Resource Utilization of Waste Polyurethane Foam Plastics".

This standard specifies the general principles for the resource utilization of waste polyurethane foam plastics, and provides suggestions on the resource utilization methods and selection, technology, environmental protection and safety of waste polyurethane foam plastics.

This standard applies to the resource utilization and management of waste polyurethane foam plastics. It was issued by All-China Federation of Supply and Marketing Cooperatives. Issued on 2024-10-29, in force from 2025-05-01.

Found what you need?

Document preview — GH/T 1467-2024

National Standard of the People's Republic of China

ICS
13.030.10
Classification
Z05

Issued by: All-China Federation of Supply and Marketing Cooperatives

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Lacquer afforestation
  • 3.2 Lacquer afforestation methods
  • 4 Technical requirements
  • 4.1 Structural Frame
  • 4.2 System composition
  • 4.3 Consistency
  • 5.1 Traceability Unit
  • 5.2 Link docking
  • 5.3 Flow of agricultural materials
  • 5.4 Information requirements
  • 5.5 System function and realization
  • 5.6 Clarify the retrospective execution process
  • 6 Inspection rules
  • 6.1 Clear traceability plan
  • 6.2 Clarify personnel responsibilities
  • 6.3 Develop a training plan
  • 6.4 Establish a supervision plan
  • 6.5 Establishing the effectiveness of key indicators evaluation system
  • 6.6 Internal Audit
  • 6.7 Review and improvement
  • 7.1 Seedling selection
  • 7.2 Seedling packaging and transportation
  • 7.3 Seedling treatment
  • 7.4 Report Writing
  • 7.5 Level Determination
  • 7.6 Notification of evaluation results
  • 7.7 Review
  • 7.8 Result Release
  • 7.9 Post-evaluation management and re-evaluation5
  • 8 Marking, packaging, transport and storage
  • 8.1 Afforestation density
  • 8.2 Planting hole configuration
  • 8.3 Planting
  • 8.4 Planting season
  • 9 Young Forest Management
  • 9.1 Management
  • 9.2 Weeding and Loosening
  • 9.3 Replanting
  • 9.4 Detection and control of pests and diseases

1 Foreword

GH/T 1467-2024 was issued by All-China Federation of Supply and Marketing Cooperatives on 29 October 2024 and has been in force since 1 May 2025.

The GH/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the general principles for the resource utilization of waste polyurethane foam plastics, and provides suggestions on the resource utilization methods and selection, technology, environmental protection and safety of waste polyurethane foam plastics. This standard applies to the resource utilization and management of waste polyurethane foam plastics.

GH/T 1467-2024 falls under ICS 13.030.10, in the field of environment and health protection, safety.

This catalogue holds 13 other GH/T standards in that field.

In this catalogue, GH/T standards carry edition years from 1998 to 2026.

3 About this standard

Sector: Supply and Marketing Cooperatives Industry Standard (Recommended)

Issued by: All-China Federation of Supply and Marketing Cooperatives

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

GB 22128-2019 — Technical specifications for end-of-life vehicles collecting and dismantling enterprises

GB 8702-2014 — Controlling limits for electromagnetic environment

HJ 607-2011 — Technical Specifications for Pollution Control of Used Mineral Oil Recovery, Recycle and Reuse

GH/T 1354-2021 — Technical Specification for Recycling of Waste Plastic Film

5 Classification and status

International classification (ICS): 13.030.10

Chinese Standard Classification (CCS): Z 05

Prefix GH/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download GH/T 1467-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GH/T 1467-2024

$195.00