GBZ 111-2002Guide for selection and use of lead acid battery monitoring system in stationary applications of nuclear power plant (English PDF)

Foreword

This document is a standard or guiding technical document.

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed and is under the jurisdiction of the National Technical Committee on Standardization of Nuclear Instruments and Meters (SAC/TC30).

1 Scope

This document provides information on the system composition and characteristics of battery monitoring systems, nuclear safety considerations, and other application considerations.

Suggestions regarding factors, measurement parameters, etc.

This document applies to the selection of battery monitoring systems for exhaust-type lead-acid batteries and valve-regulated lead-acid batteries in the DC systems of nuclear power plants.

With use.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 13286-2021 Criteria for Independence of Electrical Equipment and Circuits in Nuclear Power Plants (Safety Level) DL/T 2226-2021 Technical Specifications for Online Monitoring System of Valve-Regulated Lead-Acid Battery Packs for Electric Power NB/T.20028.4 Storage Batteries for Nuclear Power Plants - Part 4: Maintenance, Testing and Replacement Methods

3 Terms and Definitions

The following terms and definitions apply to this document.

A permanently installed system capable of real-time and continuous collection, storage, and reporting of critical battery operating parameters.

Currently, the status of the battery pack is being monitored online.

Voltage sag coupdefouet the initial voltage drop and recovery process experienced by a lead-acid battery during discharge.

Ripple

The periodic deviation relative to the arithmetic mean of DC voltage.

Note. An AC component characterized by a uniform waveform in a DC circuit, usually expressed as the peak value, peak-to-peak value, or root mean square (RMS) of the current or voltage.

[Source. GB/T 2900.19-2022, 3.2.5.2, with modifications] 3.4 thermal runaway A critical state that occurs during charging, caused by the rate at which the battery pack generates heat exceeding its heat dissipation capacity, leading to a continuous rise in temperature.

This can lead to the destruction of the battery pack.

[Source. GB/T 2900.41-2008, 482-05-54]