GB/Z 25320.1001-2023Power systems management and associated information exchange - Data and communication security - Part 100-1: Conformance test cases for IEC 62351-5 and IEC TS 60870-5-7 (English PDF)
电力系统管理及其信息交换 数据和通信安全 第100-1部分:IEC 62351-5和IEC TS 60870-5-7的一致性测试用例
This is a limited preview
Buy now to download the full PDF (72 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 25320.1001-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2023
Implementation date
December 28, 2023
Scope
GB/Z 25320.1001-2023 is the English-translated version of 电力系统管理及其信息交换 数据和通信安全 第100-1部分:IEC 62351-5和IEC TS 60870-5-7的一致性测试用例.
GB/Z 25320.1001-2023 is the Chinese standard "Power systems management and associated information exchange - Data and communication security - Part 100-1: Conformance test cases for IEC 62351-5 and IEC TS 60870-5-7".
Its scope clause reads: This document provides data and communication security testing of telecontrol equipment, substation automation systems (SAS) and SCADA front-end computers: Example: This document provides a standard test method for protocol implementations to achieve interoperability to verify that devices meet standard requirements: meet the standard Conformance does not guarantee interoperability between different devices, but it is expected that testing using this document will minimize the risk of non-interoperability: mutual A basic condition for operability is that both devices should pass conformance testing: This document specifies the general conformance and/or interoperability testing of IEC 62351-5:2023 and IEC TS60870-5-7:2013 Workable processes and definitions: The conformance test cases defined in this document focus on validating IEC 62351-5:2023 and IEC TS60870-5- 7: Consistent integration of underlying identity authentication specified in:2013 to protect data based on DL/T 634:5101-2022 and DL/T 634:5104- Communications of:2009: This document deals with data and communications security conformance testing and does not cover other requirements such as security or EMC: These requirements are contained in other standards (if applicable) and proof of compliance for these subjects is completed in accordance with these standards:. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/Z 25320.1001-2023
National Standard of the People's Republic of China
- ICS
- 29.240.01
- Classification
- F 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 4 Overview
- 5 Configuration parameter verification
- 6 Communication verification
- 7 Process Verification
- 8 Test results table
1 Scope
This document provides data and communication security testing of telecontrol equipment, substation automation systems (SAS) and SCADA front-end computers:
Example:
This document provides a standard test method for protocol implementations to achieve interoperability to verify that devices meet standard requirements: meet the standard
Conformance does not guarantee interoperability between different devices, but it is expected that testing using this document will minimize the risk of non-interoperability: mutual
A basic condition for operability is that both devices should pass conformance testing:
This document specifies the general conformance and/or interoperability testing of IEC 62351-5:2023 and IEC TS60870-5-7:2013
Workable processes and definitions: The conformance test cases defined in this document focus on validating IEC 62351-5:2023 and IEC TS60870-5-
7: Consistent integration of underlying identity authentication specified in:2013 to protect data based on DL/T 634:5101-2022 and DL/T 634:5104-
Communications of:2009:
This document deals with data and communications security conformance testing and does not cover other requirements such as security or EMC: These requirements are contained in other standards (if applicable) and proof of compliance for these subjects is completed in accordance with these standards:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:
DL/T 634:56-2010 Telecontrol equipment and systems Part 5-6: IEC 60870-5 supporting standard conformance test guidelines (IEC 60870-5-6:2006,IDT)
DL/T 634:5101-2022 Telecontrol equipment and systems Part 5-101: Transmission protocol basic telecontrol task supporting standards (IEC 60870-5-101:2003,IDT)
DL/T 634:5104-2009 Telecontrol equipment and systems Part 5-104: Transmission protocol using standard transmission protocol set
IEC 60870-5-101 network access (IEC 60870-5-104:2006, IDT)
IEC TS60870-5-7:2013 Telecontrol equipment and systems Part 5-7: IEC 60870-5-101 standard and IEC 60870-5-
IEC TS60870-5-601:2015 Telecontrol equipment and systems IEC 60870-5-101 supporting standard conformance test cases (Tele-
Note: DL/T 634:5601-2016 Telecontrol equipment and systems IEC 60870-5-101 supporting standard conformance test cases (IEC TS60870-5-601:
2006,MOD)
IEC TS60870-5-604:2016 Telecontrol equipment and systems Part 5-604: Consistency of supporting standards of IEC 60870-5-104 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 72 pages — is available in the English PDF.
Referenced standards
Normative references
- DL/T 634.56-2010Telecontrol equipment and system. Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
- DL/T 634.5101-2022Telecontrol equipment and systems - Part 5-101: Supporting standards for transmission protocol basic telecontrol tasks
- DL/T 634.5104-2009Telecontrol equipment and systems. part 5-104: Transmission protocols-Network access for IEC 60870-5-101 using standard transport profiles
IEC 60870-5-101 · IEC TS60870-5-7:2013 · IEC TS60870-5-604:2016
Similar standards
How to Download GB/Z 25320.1001-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 634.5101-2022 — Telecontrol equipment and systems - Part 5-101: Supporting standards for transmission protocol basic telecontrol tasks
DL/T 634.5104-2009 — Telecontrol equipment and systems. part 5-104: Transmission protocols-Network access for IEC 60870-5-101 using standard transport profiles
DL/T 634.56-2010 — Telecontrol equipment and system. Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
Secure payment via Stripe
Payments accepted
GB/Z 25320.1001-2023
$1,010.00