GB/T 9546.801-2015Fixed resistors for use in electronic equipment—Part 8-1: Blank detail specification—Fixed surface mount resistors categorized as level G—Assessment level EZ (English PDF)
电子设备用固定电阻器 第8-1部分：空白详细规范 G等级的表面安装固定电阻器 评定水平EZ
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 9546.801-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 3, 2015
Implementation date
March 1, 2016
Scope
GB/T 9546.801-2015 is the English-translated version of 电子设备用固定电阻器 第8-1部分：空白详细规范 G等级的表面安装固定电阻器 评定水平EZ.
GB/T 9546.801-2015 is the Chinese standard "Fixed resistors for use in electronic equipment—Part 8-1: Blank detail specification—Fixed surface mount resistors categorized as level G—Assessment level EZ".
Its scope clause reads: This section is a detailed specification of the surface mount fixed resistors. It specifies the electrical, mechanical and environmental performance description and testing of components The detailed requirements.
This section applies to surface mount fixed resistors. Its clauses include normative reference documents; blank detail specification page description.
Found what you need?
Document preview — GB/T 9546.801-2015
National Standard of the People's Republic of China
- ICS
- 31.040.10
- Classification
- L 13
- Replacing
- GB/T 9547-1994
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 blank detail specification page
- 4 Features and ratings
- 4.1 General requirements
- 4.2 Size
- 4.3 Rating
- 4.4 Resistance range and allowable deviation
- 4.5 Climate category
- 4.6 Limit of resistance change
- 4.7 Resistance changes with temperature
- 4.8 Climatic order
- 4.9 Marking, packing and ordering information
- 4.10 additional content
- 4.11 to supplement or enhance the harshness or requirements specified in the general and/or sub-regulations
- 5 inspection requirements
- 5.1 Procedure
- 5.2 100% Test
- 5.3 proof of conformity
- 5.4 Release certificate certificate
- 5.5 Nonconforming product
- Appendix A (normative) Zero ohm resistance (bridging)
- Appendix B (informative) Letter symbols and abbreviations
1 Scope
This section is a detailed specification of the surface mount fixed resistors. It specifies the electrical, mechanical and environmental performance description and testing of components
The detailed requirements.
This section applies to surface mount fixed resistors.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2691-2016 Symbols for resistors and capacitors
GB/T 28162.3-2011 Packaging of components for automatic operation - Part 3. Packaging of surface mounting elements on continuous tapes
GB/T 9546.8-2015 Fixed resistors for use in electronic equipment - Part 8. Sectional specification - Fixed surface mount resistors
IEC 60068-2-1 Test Method A. Low Temperature (Environmentatesting-Part 2-1. Tests-TestA. Cold)
IEC 60068-2-2 Environmental testing - Part 2-2. Test test B. Dry heat (Environmentatesting-Part 2-2.
Tests-TestB. Dryheat)
IEC 60115-1..2008 Fixed resistors for use in electronic equipment - Part 1. General specification (Fixedresistorsforuseinelectronic equipment-Part 1. Genericspecification
IEC 60286-6 Packaging of components for automatic operation - Part 6. Cartridge - type packaging for surface mount components ofcomponentsforautomatichandling-Part 6. Bulkcasepackagingforsurfacemountingcomponents)
IEC 61340-3-1 Electrostatics Part 3-1. Electrostatic effect simulation method Human body model (HBM) component testing [Electro- statics-Part 3-1. Methodsforsimulationofelectrostaticeffects-Humanbodymodel (HBM) electro- staticdischargetestwaveforms]
IEC 61193-2..2007 Quality assessment systems - Part 2. Selection and use of sampling schemes for inspection of electronic components and packaging (Qualityassessmentsystems-Part 2. Selectionanduseofsamplingplansforinspectionofelectronic componentsandpackages
IEC 61760-1 Surface Mount Technology - Part 1. Standard Method for Surface Mount Components (SMDs) Specification [Surface mountingtechnology-Part 1. Standardmethodforthespecificationofsurfacemountingcomponents (SMDs)]
3 blank detail specification page description
Blank detail specification The numbers in square brackets should be consistent with the instructions given below.
Detailed specification of identification (1) the name of the national standardization body authorized to issue detailed specifications.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2691-2016Marking codes for resistors and capacitors
- GB/T 28162.3-2011Packaging of components for automatic handing -- Part 3: Packaging of surface mount components on continuous tapes
- GB/T 9546.8-2015Fixed resistors for use in electronic equipment -- Part 8: Sectional specification -- Fixed surface mount resistors
IEC 60068-2-1 · IEC 60068-2-2 · IEC 60115-1 · IEC 60286-6 · IEC 61340-3-1 · IEC 61193-2 · IEC 61760-1
Similar standards
Editions of GB/T 9546.801
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 9546.801-2015 | Fixed resistors for use in electronic equipment—Part 8-1: Blank detail specification—Fixed surface mount resistors categorized as level G—Assessment level EZ | current edition | Current |
| GB/T 9547-1994 | Fixed resistors for use in electronic equipment—Part 8-1: Blank detail specification—Fixed surface mount resistors categorized as level G—Assessment level EZ | previous edition | Superseded |
This page sells the current edition, GB/T 9546.801-2015. Earlier editions are listed for reference only.
How to Download GB/T 9546.801-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2691-2016 — Marking codes for resistors and capacitors
GB/T 28162.3-2011 — Packaging of components for automatic handing -- Part 3: Packaging of surface mount components on continuous tapes
GB/T 9546.8-2015 — Fixed resistors for use in electronic equipment -- Part 8: Sectional specification -- Fixed surface mount resistors
Secure payment via Stripe
Payments accepted
GB/T 9546.801-2015
$265.00