Valid

GB/T 7251.18-2026Low-voltage switchgear and controlgear assemblies - Part 18: Additional requirements for smart assemblies (English PDF)

低压成套开关设备和控制设备 第18部分:智能型成套设备附加要求

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 7251.18-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

September 28, 2026

Implementation date

April 1, 2027

Scope

GB/T 7251.18-2026 is the English-translated version of 低压成套开关设备和控制设备 第18部分:智能型成套设备附加要求.

GB/T 7251.18-2026 is the Chinese national standard "Low-voltage switchgear and controlgear assemblies - Part 18: Additional requirements for smart assemblies". It was issued on September 28, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on April 1, 2027. It is a current standard.

Found what you need?

Document preview — GB/T 7251.18-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 7251.18-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 28 September 2026 and takes effect on 1 April 2027.

It is one of 21 parts of the GB/T 7251 series.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 7251.18-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 7251.1-2013 — Part 1: General rules

GB/T 7251.1-2023 — Part 1: General rules

GB/T 7251.2-2023 — Part 2: Power switchgear and controlgear assemblies

GB/T 7251.3-2006 — Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

GB/T 7251.3-2017 — Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

GB/T 7251.3-2026 — Low-voltage switchgear and controlgear assemblies-Part 3:Distribution boards intended to be operated by ordinary persons(DBO)

GB/T 7251.4-2006 — Part 4: Particular requirements for assemblies for construction sites (ACS)

GB/T 7251.4-2017 — Part 4: Particular requirements for assemblies for construction sites (ACS)

GB/T 7251.4-2026 — Part 4: Particular requirements for assemblies for construction sites (ACS)

GB/T 7251.5-2008 — Part 5: Particular requirements for assemblies for power distribution in public networks

GB/T 7251.5-2017 — Part 5: Assemblies for power distribution in public networks

GB/T 7251.5-2025 — Part 5: Assemblies for power distribution in public networks

GB/T 7251.6-2015 — Part 6: Busbar trunking systems (busways)

GB/T 7251.7-2015 — Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations

GB/T 7251.7-2025 — Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

GB/T 7251.8-2005 — General technology requirement for intelligent assemblies

GB/T 7251.8-2020 — Low-voltage switchgear and controlgear assemblies—Part 8: General technical requirements for intelligent assembly

GB/T 7251.10-2014 — Part 10: Guidance to specifying assemblies

GB/T 7251.10-2025 — Part 10: Guidance to specifying assemblies

GB/T 7251.12-2013 — Part 2: Power switchgear and controlgear assemblies

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

How to Download GB/T 7251.18-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 7251.18-2026

$255.00