Valid

GB/T 7000.204-2023Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 7000.204-2023 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Recommended

Issue date

December 28, 2023

Implementation date

January 1, 2026

Scope

GB/T 7000.204-2023 (Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires) is available as an English-translated PDF.

GB/T 7000.204-2023 — This document specifies the requirements for portable general purpose luminaires. This document applies to portable general purpose luminaires for indoor and/or outdoor use (e.g., garden use) with a power supply voltage not exceeding 250V and using electric light sources as light sources. This document does not apply to hand luminaires.

Found what you need?

Document preview — GB/T 7000.204-2023

National Standard of the People's Republic of China

ICS
29.140

Issued by: State Administration for Market Regulation

Contents

  • Foreword...3
  • Introduction...7
  • 1 Scope...10
  • 2 Normative references...10
  • 3 Terms and definitions...10
  • 4 General test requirements...10
  • 5 Classification of luminaires...11
  • 6 Marks...11
  • 7 Structure...12
  • 8 Creepage distance and clearance...13
  • 9 Grounding provisions...13
  • 10 Terminal blocks...14
  • 11 External and internal wirings...14
  • 12 Protection against electric shock...14
  • 13 Durability test and thermal test...15
  • 14 Dust and water resistance...15
  • 15 Insulation resistance and electrical strength...15
  • 16 Heat, fire and tracking resistance...16
  • Bibliography...17

Foreword

This document was drafted in accordance with the rules given in GB/T 1.1-2020

"Directives for standardization - Part 1: Rules for the structure and drafting of

standardizing documents".

This document is Part 2-4 of GB(/T) 7000. The following parts of GB(/T) 7000 have

been published:

- Luminaires -- Part 1: General requirements and tests (GB/T 7000.1-2023);

- Luminaires -- Part 2-1: Particular requirements -- Fixed general purpose luminaires

(GB/T 7000.201-2023);

- Luminaires -- Part 2-2: Particular requirements -- Recessed luminaires (GB/T

7000.202-2023);

- Luminaires -- Part 2-3: Particular requirements -- Luminaires for road and street

lighting (GB 7000.203-2013);

- Luminaires -- Part 2-4: Particular requirements -- Portable general purpose

luminaires (GB/T 7000.204-2023);

- Luminaires -- Part 2-5: Particular requirements -- Floodlights (GB/T 7000.205-

2023);

- Luminaires -- Part 2-6: Particular requirements -- Luminaires with built-in trans-

formers for filaments luminaires (GB 7000.6-2008);

- Luminaires -- Part 2-8: Particular requirements -- Handlamps (GB/T 7000.208-

2023);

- Safety requirements for photo and film luminaires (non-professional) (GB

7000.19-2005);

- Luminaires -- Part 2-10: Particular requirements -- Portable luminaires for children

(GB 7000.4-2007);

- Luminaires -- Part 2-11: Particular requirements -- Aquarium luminaires (GB/T

7000.211-2023);

- Luminaires -- Part 2-12: Particular requirements -- Mains socket-outlet mounted

nightlights (GB/T 7000.212-2023);

- Luminaires -- Part 2-13: Particular requirements -- Ground recessed luminaires

(GB/T 7000.213-2023);

- Luminaires -- Part 2-14: Particular requirements -- Luminaires for cold cathode

Luminaires - Part 2-4: Particular requirements - Portable

general purpose luminaires

1 Scope

This document specifies the requirements for portable general purpose luminaires.

This document applies to portable general purpose luminaires for indoor and/or outdoor

use (e.g., garden use) with a power supply voltage not exceeding 250V and using

electric light sources as light sources.

This document does not apply to hand luminaires.

2 Normative references

The following referenced documents are indispensable for the application of this

document. For dated references, only the edition cited applies. For undated references,

the latest edition of the referenced document (including any amendments) applies.

GB/T 7000.1, Luminaires -- Part 1: General requirements and tests (GB/T 7000.1-

2023, IEC 60598-1:2020, MOD)

GB/T 16842-2016, Protection of persons and equipment by enclosures -- Probe for

verification (IEC 61032:1997, IDT)

3 Terms and definitions

For the purposes of this document, the terms and definitions defined in Part 11 apply.

3.1 candlestick luminaires

A portable general purpose luminaire with bulbs connected in series, fixedly mounted

and dispersed on free-standing racks.

NOTE: Candlestick luminaires are available with E5 or E10 lamp bases.

4 General test requirements

The provisions of Part 1, Chapter 0 apply. The tests required in Part 1 shall be performed

1 "Part 1" mentioned in this document refers to GB/T 7000.1.

10 Terminal blocks

The provisions of Chapters 14 and 15 of Part 1 shall apply.

11 External and internal wirings

The provisions of Chapter 5 of Part 1 shall apply with the following modifications.

11.1 The requirement that "the cord anchor shall be at least partially fixed to the

luminaire or be an integral part of the luminaire" does not apply to table luminaires

made of glass or ceramic for indoor use.

11.2 For indoor Class I and Class II portable general purpose luminaires with a mass

less than 1 kg, a rated current not exceeding 2.5 A, and a flexible cable length not

exceeding 2 m, the nominal cross-sectional area of the copper core conductor of the

flexible cable shall not be less than 0.5 mm2.

11.3 Outdoor portable general purpose luminaires that are not provided with flexible

cables or cords and plugs shall provide wiring terminals, flexible cord fixing frames

and wire inlets for the correct connection of flexible cables or cords.

NOTE: Wiring regulations in various countries may require that Class II portable general purpose

outdoor luminaires be equipped with a non-detachable flexible cable or cord and plug.

Compliance shall be checked by inspection and, where necessary, by the tension and

torque tests required by Part 1, Chapter 5.

11.4 For Class I and Class II portable general purpose luminaires for outdoor use, the

non-detachable flexible cable or cord shall not be lower than the model of 245 IEC 57.

NOTE: In Australia and New Zealand, polyvinyl chloride (PVC) insulated cables are suitable for

outdoor use.

Compliance shall be checked by inspection.

12 Protection against electric shock

Part 1, Chapter 8 a s well as the following provisions shall apply.

Class I portable general purpose luminaires using bayonet lamp holders shall comply

with one of the following two provisions:

1) When the lamp is assembled in normal use, the test finger shall not touch the lamp

cap of the bulb;

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 7000.204-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 7000.204-2023

$250.00