Valid

GB/T 5169.30-2020Fire hazard test for electric and electronic products - Part 30: Heat release. Summary and correlation of test methods (English PDF)

电工电子产品着火危险试验第30部分：热释放试验方法概要和相关性

Preview PDF

This is a limited preview

Buy now to download the full PDF (39 pages)

Need quotation for your management?

Get a formal quotation for GB/T 5169.30-2020 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

November 19, 2020

Implementation date

June 1, 2021

Scope

GB/T 5169.30-2020 is the English-translated version of 电工电子产品着火危险试验第30部分：热释放试验方法概要和相关性.

GB/T 5169.30-2020 is the Chinese standard "Fire hazard test for electric and electronic products - Part 30: Heat release. Summary and correlation of test methods".

Its scope clause reads: This part of GB/T 5169 gives the published measurement of the heat release of electrical and electronic products or constituent materials in a fire test.

Summary of test method. This part states the latest technical status of the current test methods, and where appropriate, also includes the relevance and use of Special observation.

The list of test methods is not exhaustive. Unless otherwise specified, test methods not developed by IEC are not recognized by IEC. Yes. As described in IEC 60695-1-10, IEC 60695-1-11 [39] and IEC 60695-1-12 [40], heat release data can be used as fire hazard assessment And part of fire safety engineering.

This part is intended for product committees to write standards based on the principles specified in IEC Guide104 and ISO /IEC Guide51 use. One of the tasks of the product committee is to use this series of standards wherever applicable when writing its own standards.

Unless relevant Standard specifically mentioned or listed is not applicable, otherwise the requirements, test methods or test conditions of this section are applicable. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 5169.30-2020

National Standard of the People's Republic of China

Classification: K 04
Replacing: GB/T 5169.30-2008

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Summary of test methods
5 Overview of test methods

1 Scope

This part of GB/T 5169 gives the published measurement of the heat release of electrical and electronic products or constituent materials in a fire test.

Summary of test method. This part states the latest technical status of the current test methods, and where appropriate, also includes the relevance and use of

Special observation.

The list of test methods is not exhaustive. Unless otherwise specified, test methods not developed by IEC are not recognized by IEC.

Yes.

As described in IEC 60695-1-10, IEC 60695-1-11 [39] and IEC 60695-1-12 [40], heat release data can be used as fire hazard assessment

And part of fire safety engineering.

This part is intended for product committees to write standards based on the principles specified in IEC Guide104 and ISO /IEC Guide51 use.

One of the tasks of the product committee is to use this series of standards wherever applicable when writing its own standards. Unless relevant

Standard specifically mentioned or listed is not applicable, otherwise the requirements, test methods or test conditions of this section are applicable.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

GB/T 5169.1-2015 Fire hazard test of electric and electronic products Part 1.Terminology of fire test (IEC 60695-4.2012,

IDT)

ISO 13943.2008 Fire Safety Vocabulary

ISO /IEC Guide51 Guidelines concerning safety content in safety standards

IEC 60695-1-10 Fire hazard test Part 1-10.General rules for the assessment of fire hazard for electrical products

IEC 60695-8-1 Fire hazard test Part 8-1.General rules for heat release

Compilation of IEC Guide104 safety publications and application guidelines for basic safety publications and multi-disciplinary public safety publications

3 Terms and definitions

The following terms and definitions defined in GB/T 5169.1-2015 and ISO 13943.2008 apply to this document. In order to make

GB/T 5169.19 | GB/T 5169.16 | GB/T 5169.21 | GB/T 5169.36 | GB/T 5169.35 | GB/T 5169.23 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 39 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 5169.1-2015Fire hazard testing for electric and electronic products - Part 1: Terminology concerning fire tests

IEC 60695 · ISO 13943.2008

How to Download GB/T 5169.30-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.