GB/T 5135.19-2010Automatic sprinkler system - Part 19: Plastic pipe and fittings (English PDF)
自动喷水灭火系统 第19部分：塑料管道及管件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 5135.19-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 26, 2010
Implementation date
February 1, 2011
Scope
GB/T 5135.19-2010 is the English-translated version of 自动喷水灭火系统 第19部分：塑料管道及管件.
GB/T 5135.19-2010 is the Chinese standard "Automatic sprinkler system - Part 19: Plastic pipe and fittings".
Its scope clause reads: "Automatic Sprinkler System" in this part of the provisions of the automatic sprinkler system with plastic pipes and fittings requirements, test methods, inspection Rules and packaging, transportation, storage and so on.
This part applies to the fire hazard class specified in GB 50084 -.2001 (2005 edition) as light dangerous grade, medium - (PVC-C) plastic pipes and fittings (hereinafter referred to as "PVC-C"), which are used as water distribution pipes and water distribution pipes, Pipes and fittings).
Other plastic pipes and fittings can also be used. Its clauses include normative reference documents; terms and definitions; requirements.
Found what you need?
Document preview — GB/T 5135.19-2010
National Standard of the People's Republic of China
- ICS
- 13.220.10
- Classification
- C 84
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Requirements
- 5 Test methods
- 6 Inspection rules
- 7 Packaging, transportation, storage
- Appendix A (Normative Appendix) Tolerance
- Appendix B (informative) Adhesive requirements
1 Scope
"Automatic Sprinkler System" in this part of the provisions of the automatic sprinkler system with plastic pipes and fittings requirements, test methods, inspection
Rules and packaging, transportation, storage and so on.
This part applies to the fire hazard class specified in GB 50084 -.2001 (2005 edition) as light dangerous grade, medium - (PVC-C) plastic pipes and fittings (hereinafter referred to as "PVC-C"), which are used as water distribution pipes and water distribution pipes,
Pipes and fittings). Other plastic pipes and fittings can also be used.
2 normative reference documents
The terms of this document are incorporated by reference in this section and become part of this section. Whichever is the date of the reference file, which is followed by all (Excluding corrigenda) or revisions do not apply to this part, however, encourage parties to reach an agreement under this section
Whether you can use the latest version of these files. For undated references, the latest edition applies to this section.
GB/T 1033.1-2008 Plastics - Determination of non-foam density - Part 1. Impregnation, liquid pycnometer and titration (ISO 1183-1..2004, IDT)
Automatic sprinkler systems - Part 1. Sprinklers ISO 5135.1-2003
GB/T 6671-2001 Determination of longitudinal shrinkage of thermoplastics pipes (eqvISO 2505..1994)
GB/T 7139-2002 Determination of chlorine content of plastic vinyl chloride homopolymer and copolymer (eqvISO 1158..1998)
GB/T 8802-2001 Thermoplastics pipes, pipe fittings Vicat softening temperature determination (eqvISO 2507..1995)
GB/T 8804.1-2003 Thermoplastic pipes - Determination of tensile properties - Part 1. Test methods (ISO 6259-1.
1997, IDT)
GB/T 8804.2-2003 Thermoplastic pipes - Determination of tensile properties - Part 2. Unplasticized polyvinyl chloride (PVC - U), chlorinated
Polyvinyl chloride (PVC-C) and high impact polyvinyl chloride (PVC-HI) tubing (ISO 6259-2..1997, IDT)
GB/T 8806 Plastics piping systems - Determination of the dimensions of plastic parts
Code for design of automatic sprinkler system GB 50084 -.2001 (2005)
3 terms and definitions
The following terms and definitions apply to this section.
3.1 Standard size than standanddimensionratio
SDR The ratio of the nominal outside diameter of the pipe to the nominal wall thickness.
4 requirements
4.1 appearance
Pipes and fittings inside and outside the surface should be smooth and smooth, no scratches, depression, rupture and so on.
4.2 logo
The pipeline should have clear and durable markings, which should include at least. product name, specification and size, date of manufacture, manufacturer name or […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 5135.19-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5135.18-2026 — Automatic sprinkler systems - Part 18: Pipe supports and hangers for fire protection systems
GB/T 5135.18-2010 — Automatic sprinkler system - Part 18: Pipe hangers
GB/T 5135.20-2010 — Automatic sprinkler system - Part 20: Coating steel pipe
Secure payment via Stripe
Payments accepted
GB/T 5135.19-2010
$255.00