Valid

GB/T 4937.7-2026Semiconductor devices—Mechanical and climatic test methods—Part 7: Internal moisture content measurement and the analysis of other residual gases (English PDF)

半导体器件 机械和气候试验方法 第7部分:内部水汽测量和其它残余气体分析

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 4937.7-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

February 1, 2027

Scope

GB/T 4937.7-2026 is the English-translated version of 半导体器件 机械和气候试验方法 第7部分:内部水汽测量和其它残余气体分析.

GB/T 4937.7-2026 is the Chinese national standard "Semiconductor devices—Mechanical and climatic test methods—Part 7: Internal moisture content measurement and the analysis of other residual gases".

It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on February 1, 2027. It is a current standard.

Found what you need?

Document preview — GB/T 4937.7-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 4937.7-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 February 2027.

It is one of 44 parts of the GB/T 4937 series.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 4937.7-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 4937-1995 — Mechanical and climatic test methods for semiconductor devices

GB/T 4937.1-2006 — Semiconductor devices -- Mechanical and climatic test methods -- Part 1: General

GB/T 4937.2-2006 — Semiconductor devices -- Mechanical and climatic test methods -- Part 2: Low air pressure

GB/T 4937.3-2012 — Semiconductor devices -- Mechanical and climatic tests methods -- Part 3: External visual examination

GB/T 4937.4-2012 — Semiconductor devices -- Mechanical and climatic test methods -- Part 4: Damp heat, steady state, highly accelerated stress test (HAST)

GB/T 4937.8-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing

GB/T 4937.9-2026 — Semiconductor devices - Mechanical and climatic test methods - Part 9: Permanence of marking

GB/T 4937.10-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 10: Mechanical shock - Device and subassembly

GB/T 4937.11-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 11: Rapid change of temperature -- Two-fluid-bath method

GB/T 4937.12-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 12: Vibration, variable frequency

GB/T 4937.13-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 13: Salt atmosphere

GB/T 4937.14-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 14: Robustness of terminations (lead integrity)

GB/T 4937.15-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 15: Resistance to soldering temperature for through-hole mounted devices

GB/T 4937.16-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection(PIND)

GB/T 4937.17-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 17: Neutron irradiation

GB/T 4937.18-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 18: Ionizing radiation (total dose)

GB/T 4937.19-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 19: Die shear strength

GB/T 4937.20-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat

GB/T 4937.21-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 21: Solderability

GB/T 4937.22-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 22: Bond strength

GB/T 4937.23-2023 — Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life

GB/T 4937.24-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 24: Accelerated moisture resistance - Unbiased HAST

GB/T 4937.25-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling

GB/T 4937.26-2023 — Semiconductor devices - Mechanical and climate test methods - Part 26: Electrostatic discharge(ESD)sensitivity testing - Human body model(HBM)

GB/T 4937.27-2023 — Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge(ESD) sensitivity testing - Machine model(MM)

GB/T 4937.28-2026 — Semiconductor devices - Mechanical and climate test methods - Part 28: Electrostatic discharge (ESD) sensitivity testing - Charged device model (CDM) - device level

GB/T 4937.29-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test

GB/T 4937.30-2018 — Semiconductor devices -- Mechanical and climatic test methods -- Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing

GB/T 4937.31-2023 — Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices(internally induced)

GB/T 4937.32-2023 — Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices(externally induced)

GB/T 4937.33-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 33: Accelerated moisture resistance - Unbiased autoclave

GB/T 4937.34-2024 — Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling

GB/T 4937.35-2024 — Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy for plastic encapsulated electronic components

GB/T 4937.36-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 36: Acceleration,steady state

GB/T 4937.37-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer

GB/T 4937.38-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 38: Soft error test method for semiconductor devices with memory

GB/T 4937.39-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 39: Measurement of moisture diffusivity and water solubility in organic materials used for semiconductor components

GB/T 4937.40-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge

GB/T 4937.41-2026 — Semiconductor devices - Mechanical and climatic test methods - Part 41: Test method for reliability of non-volatile memory devices

GB/T 4937.42-2023 — Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage

GB/T 4937.44-2025 — Semiconductor devices - Mechanical and climatic test methods - Part 44: Neutron beam irradiated single event effect (SEE) test method for semiconductor devices

GB/T 4937.201-2018 — Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat

GB/T 4937.201-2026 — Semiconductor devices - Mechanical and climatic test methods - Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

How to Download GB/T 4937.7-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 4937.7-2026

$255.00