GB/T 47929.3-2026Additive manufacturing of metals - Qualification principles of operators - Part 3: Operators for powder bed fusion-electron beam (PBF-EB) (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

This document is Part 3 of GB/T 47929, "Principles for the Qualification Assessment of Operators in Metal Additive Manufacturing". GB/T 47929 has been issued.

The following parts were laid out.

---Part 1: General Rules;

---Part 2: Laser Powder Bed Melting (PBF-LB) Operator;

---Part 3: Electron Beam Powder Bed Melting (PBF-EB) Operator;

---Part 4: Laser Directed Energy Deposition (DED-LB) Operator;

---Part 5: Directed Energy Deposition by Arc (DED-Arc) Operator.

This document is modified to adopt ISO/ASTM 52926-3:2023 "Qualification principles for metal additive manufacturing - Part 3: PBF-EB operation".

"Member Qualification Assessment".

The technical differences between this document and ISO/ASTM 52926-3:2023, and the reasons therefor, are as follows.

---ISO/ASTM 52900 has been replaced with the normatively referenced GB/T 35351 (see Chapter 3).

GB/T 47929.1 replaces ISO/ASTM 52926-1 (see Chapter 3) to maintain the terminology commonly used in my country's additive manufacturing field.

The definition method is easy to use;

---ISO/ASTM 52926-1 (see 4.2.1) has been replaced with the normatively referenced GB/T 47929.1 to comply with my country's additive manufacturing standards.

Current status of operator qualification assessment in the industry.

The following editorial changes have been made to this document.

EB) Operator;

---The section concerning the purpose and significance of this document in Chapter 1 of ISO/ASTM 52926-3:2023 has been deleted;

---The introductory information regarding the URLs to the ISO and IEC terminology databases in Chapter 3 of ISO/ASTM 52926-3:2023 has been removed.

content;

---The references cited in the training and assessment sections of operator qualification have been changed (see note 4.1);

---The section on the types of theoretical exam questions and the recommendation for 60% of the total score in section 4.2.1 of ISO/ASTM 52926-3:2023 has been deleted.

Avoid repetition;

---Added introductory text to the columns (see 4.2.2~4.2.7);

---Added a note for version 4.2.7.

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the China Machinery Industry Federation.

This document is under the jurisdiction of the National Technical Committee on Standardization of Additive Manufacturing (SAC/TC562).

Introduction

Additive manufacturing, as an emerging manufacturing process, is developing towards greater complexity, customization, and integration, and features decentralized production.

With advantages such as reduced production costs and shorter delivery cycles, additive manufacturing technology has broad application prospects. As the technology is widely applied, its processing efficiency will continue to improve.

Strict requirements.

As with traditional manufacturing processes, when additive manufacturing is used to produce industrial parts, it must meet relevant quality and safety requirements.

Therefore, when designing the production process and planning the production environment, it is essential to ensure the consistency and repeatability of the process and the quality of the final product. Thus, it is necessary to ensure...

All personnel involved in the entire production process possess the corresponding capabilities.

GB/T 47929, "Principles for the Qualification Assessment of Metal Additive Manufacturing Operators," describes the capabilities of operators in the field of additive manufacturing technology and the responsibilities aim to provide guidance and standards for the qualification of operators in metal additive manufacturing applications in general industrial settings. For specific industries and application areas...

For domains (such as aerospace, automotive, rail transportation, biomedicine) or to meet regulatory requirements, industry-specific standards may be used in place of this document.

Metal additive manufacturing involves various manufacturing processes, and qualification depends on the process category. Therefore, additive manufacturing operators need to be qualified according to the process.

The qualification is based on the category and is only valid for that specific process category. GB/T 47929 consists of five parts.

---Part 1: General Rules. The purpose is to provide general requirements for the qualification of metal additive manufacturing operators.

---Part 2: Laser Powder Bed Fusion (PBF-LB) Operators. The aim is to provide qualification guidelines for PBF-LB operators.

Require.

---Part 3: Electron Beam Powder Bed Fusion (PBF-EB) Operators. The aim is to provide qualification guidelines for PBF-EB operators.

Require.

---Part 4: Laser Directed Energy Deposition (DED-LB) Operators. The purpose is to provide qualification guidelines for DED-LB operators.

Require.

---Part 5: Directed Electric Arc Deposition (DED-Arc) Operators. The purpose is to provide qualification guidelines for DED-Arc operators.

Require.

Principles for the Qualification Assessment of Metal Additive Manufacturing Operators (PBF-EB) Operator

1 Scope

This document specifies the competencies and responsibilities required for the qualification of operators in metal electron beam powder bed fused additive manufacturing.

This document applies to the qualification of electron beam powder bed melting operators responsible for the production of metal parts in the additive manufacturing field.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 35351 Additive Manufacturing Terminology GB/T 47929.1 Principles for the Qualification Assessment of Metal Additive Manufacturing Operators Part 1: General Rules (GB/T 47929.1-2026) ISO/ASTM 52926-1:2023, MOD)

3 Terms and Definitions

The terms and definitions defined in GB/T 35351 and GB/T 47929.1 apply to this document.

4 Evaluation Requirements