GB/T 47657-2026Greenhouse gases — Quantification method and requirements for the carbon footprint of products — Coal-fired power generation (English PDF)
温室气体 产品碳足迹量化方法与要求 燃煤发电
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 47657-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 2, 2026
Implementation date
February 1, 2027
Scope
GB/T 47657-2026 is the English-translated version of 温室气体 产品碳足迹量化方法与要求 燃煤发电.
GB/T 47657-2026 gives a method and requirements for quantifying the carbon footprint of products, applied to coal-fired power generation. It establishes the principles of quantification and specifies the objectives and scope, inventory analysis, impact assessment, interpretation of results and the carbon footprint report.
Terms include coal-fired power generation and heat supply. Appendices give global warming potential reference values and a report template. It applies to quantifying the carbon footprint of coal-fired power generation products.
Its normative references include GB 17167, GB/T 24040, GB/T 24044, GB/T 24067 and DL/T 904. Issued on 2 July 2026 and applicable from 1 February 2027, it is a new standard and replaces no earlier edition.
Found what you need?
Document preview — GB/T 47657-2026
National Standard of the People's Republic of China
- ICS
- 13.020.10
- Classification
- Z 00
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Quantification Principles
- 5 Quantification Objectives
- 6 Quantification range
- 7 List Analysis
- 8 Impact Assessment
- 10 Product Carbon Footprint Report
- Appendix B (Informative) GWP Reference Value
- Appendix C (Informative) Product Carbon Footprint Report (Template)
- Reference
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".
1 Scope
This document establishes the principles for quantifying the carbon footprint of coal-fired power generation products, and specifies the purpose and scope of quantification, inventory analysis, impact assessment, and result interpretation. The report includes information on carbon footprint of products, etc.
This document applies to the quantification of the carbon footprint of coal-fired power generation products.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies to this document.
GB 17167 General Rules for the Configuration and Management of Energy Measuring Instruments in Energy-Using Units
GB/T 24040-2008 Principles and Framework for Environmental Management Life Cycle Assessment
GB/T 24044-2008 Requirements and Guidelines for Environmental Management Life Cycle Assessment
GB/T 24067-2024 Requirements and Guidelines for Quantifying the Carbon Footprint of Greenhouse Gas Products
GB/T 32150-2015 General Rules for Greenhouse Gas Emission Accounting and Reporting by Industrial Enterprises
GB/T 32151.2-2015 Greenhouse Gas Emission Accounting and Reporting Requirements Part 2: Power Grid Enterprises
DL/T 904 Calculation Method for Technical and Economic Indicators of Thermal Power Plants
3 Terms and Definitions
The definitions in GB/T 24040-2008, GB/T 24044-2008, GB/T 24067-2024, and GB/T 32150-2015, and the following... The terms and definitions listed apply to this document.
3.1 Coal-fired power generation
Using fossil fuels, primarily coal, to heat water in a boiler and generate steam, which drives a steam turbine to rotate and then a generator to produce electricity. energy.
3.3 Heat supply
The amount of heat supplied to the outside by the generating unit (or power plant) during the statistical period. [Source: DL/T 1365-2014, 5.3.1.5]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 17167General rules for energy measuring instrument equipping and managing of energy user
- GB/T 24040-2008Environmental management -- Life cycle assessment -- Principles and frameworks
- GB/T 24044-2008Environmental management -- Life cycle assessment -- Requirements and guidelines
- GB/T 24067-2024Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification
- GB/T 32150-2015General guidelines for greenhouse gas emission accounting and reporting for industrial enterprises
- GB/T 32151.2-2015Requirements of the greenhouse gas emissions accounting and reporting—Part 2:
How to Download GB/T 47657-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 904-2015 — Calculating method of economical and technical index for thermal power plant
GB 17167-2025 — General rules for energy measuring instrument equipping and managing of energy user
GB/T 24040-2008 — Environmental management -- Life cycle assessment -- Principles and frameworks
Secure payment via Stripe
Payments accepted
GB/T 47657-2026
$420.00