GB/T 45542-2025Specification for integrated energy efficiency evaluation of industrial boilers (English PDF)
工业锅炉综合能效评价技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 45542-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 28, 2025
Implementation date
October 1, 2025
Scope
GB/T 45542-2025 is the English-translated version of 工业锅炉综合能效评价技术规范.
GB/T 45542-2025 is the Chinese standard "Specification for integrated energy efficiency evaluation of industrial boilers".
Its scope clause reads: This document specifies the general requirements for the comprehensive energy efficiency evaluation of industrial boilers, describes the evaluation method and comprehensive energy efficiency classification, and gives The contents of the evaluation report were released.
This document is applicable to solid fuel boilers and liquid fuel boilers with a rated pressure less than 3.8MPa and a medium of water or liquid organic heat carrier, and the comprehensive energy efficiency evaluation of gas fuel boilers.
Non-power generation steam boilers with rated steam pressure greater than or equal to 3.8MPa shall be implemented as a reference. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 45542-2025
National Standard of the People's Republic of China
- ICS
- 27.060.30
- Classification
- J 98
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 5 Evaluation Method
- 6 Comprehensive energy efficiency classification
- 7 Evaluation Report
1 Scope
This document specifies the general requirements for the comprehensive energy efficiency evaluation of industrial boilers, describes the evaluation method and comprehensive energy efficiency classification, and gives
The contents of the evaluation report were released.
This document is applicable to solid fuel boilers and liquid fuel boilers with a rated pressure less than 3.8MPa and a medium of water or liquid organic heat carrier.
And the comprehensive energy efficiency evaluation of gas fuel boilers. Non-power generation steam boilers with rated steam pressure greater than or equal to 3.8MPa shall be implemented as a reference.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 1576 Industrial boiler water quality
GB/T 2900.48 Electrical terminology boiler
GB/T 5468 Boiler smoke test method
GB/T 10180 Thermal performance test procedures for industrial boilers
GB/T 12145 Steam quality for thermal power generating units and steam power equipment
GB/T 16157 Determination of particulate matter in exhaust gas from stationary sources and sampling methods for gaseous pollutants
GB 23971 Organic heat carrier
GB/T 24747 Safety technical requirements for organic heat carriers
HJ/T 42 Determination of nitrogen oxides in exhaust gas from stationary sources - Ultraviolet spectrophotometry
HJ/T 43 Determination of nitrogen oxides in exhaust gas from stationary sources - Naphthylethylenediamine hydrochloride spectrophotometric method
HJ/T 56 Determination of sulfur dioxide in exhaust gas from stationary sources - Iodine titration method
HJ57 Determination of sulfur dioxide in waste gas from stationary pollution sources - Constant potential electrolysis method
HJ75 Technical Specification for Continuous Monitoring of Flue Gas (SO2, NOx, Particulate Matter) Emissions from Stationary Pollution Sources
HJ76 Technical requirements and detection methods for continuous monitoring system of flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
HJ/T 373 Technical Specification for Quality Assurance and Quality Control of Stationary Pollution Source Monitoring (Trial)
HJ/T 397 Technical Specification for Stationary Source Exhaust Gas Monitoring
HJ629 Determination of sulfur dioxide in waste gas from stationary pollution sources - Non-dispersive infrared absorption method
HJ692 Determination of nitrogen oxides in waste gas from stationary pollution sources - Non-dispersive infrared absorption method
HJ693 Determination of nitrogen oxides in waste gas from stationary pollution sources - Constant potential electrolysis method
HJ836 Gravimetric method for determination of low concentration particulate matter in waste gas from stationary pollution sources
NB/T 47034 Technical requirements for industrial boilers
NB/T 47066 Test methods for thermal performance of condensing boilers
3 Terms and definitions
The terms and definitions defined in GB/T 2900.48, GB/T 10180 and NB/T 47034 and the following apply to this document. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1576Water quality for industrial boilers
- GB/T 2900.48Electrotechnical terminology of boilers
- GB/T 5468Measurement method of smoke and dust emission from boilers
- GB/T 10180Thermal performance test code for industrial boilers
- GB/T 12145Quality criterion of water and steam for power plant and steam-generating equipment
- GB/T 16157Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
Editions of GB/T 45542
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 45542-2025 | Specification for integrated energy efficiency evaluation of industrial boilers | current edition | Current |
This page sells the current edition, GB/T 45542-2025. Earlier editions are listed for reference only.
How to Download GB/T 45542-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 23971-2009 — Organic heat transfer fluids
GB 23971-2025 — Organic heat transfer fluids
GB/T 10180-2017 — Thermal performance test code for industrial boilers
Secure payment via Stripe
Payments accepted
GB/T 45542-2025
$255.00