GB/T 44565-2024Technical requirements of high efficiency grate furnace for assessment (English PDF)
高效能炉排炉评价技术要求
Open the GB/T 44565-2024 preview as PDF
This is a limited preview
Buy now to download the full PDF (15 pages)
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2024
Implementation date
April 1, 2025
Scope
GB/T 44565-2024 is the English-translated version of 高效能炉排炉评价技术要求.
GB/T 44565-2024 is the Chinese national standard covering the mechanical grate furnace that burns domestic waste in layers — the evaluation requirements, the test methods, the calculation methods and the evaluation method itself, the furnace bounded by the grate, the walls and the first flue outlet, the primary and auxiliary burners that heat it on start-up and hold its temperature in service, and the annual operating hours that decide how much of the year it actually runs. First edition, under the National Development and Reform Commission. In force from 1 April 2025. Issued on 29 September 2024, it has been in force since 1 April 2025.
Document preview — GB/T 44565-2024
National Standard of the People's Republic of China
- ICS
- 13.020
- Classification
- Z 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 grate furnace
- 3.2 primary burner
- 3.3 Auxiliary burner
- 3.4 furnace
- 3.5 operating hours per year
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the National Development and Reform Commission.
This document is under the jurisdiction of the National Environmental Protection Industry Standardization Technical Committee (SAC/TC 275).
This document was drafted by: China National Institute of Standardization, Everbright Environment Technology (China) Co., Ltd., China Tianying Co., Ltd., Suzhou Xire Energy Saving and Environmental Protection Technology Co., Ltd., Shanghai Kangheng Environmental Co., Ltd., Fujian Longking Environmental Protection Co., Ltd., China Recycling Economic Association, Xinyuan (China) Environmental Technology Co., Ltd., Chinese Research Academy of Environmental Sciences, Solid Waste and Chemicals of the Ministry of Ecology and Environment Management Technology Center, Southwest Jiaotong University, Hubei Electric Power Planning and Design Institute Co., Ltd., China Power Engineering Group Environmental Engineering Co., Ltd.
Guangxi Beitou Environmental Protection Water Group Co., Ltd., Haitian Water Group Co., Ltd., Guizhou Qingfeng Environmental Protection Technology Research Institute Co., Ltd., Jingjinyutongda Refractory Technology Co., Ltd., Green Power Environmental Protection Group Co., Ltd., Hanlan Environmental Co., Ltd., Beijing Zhongkerun Yu Environmental Technology Co., Ltd., Tus-Environmental Technology Development Co., Ltd., Zhonghaikang Environmental Technology Co., Ltd., Beijing Jiya Special Environmental Protection Technology Co., Ltd., Chengdu Xingrong Renewable Energy Co., Ltd., Shenzhen Energy Environmental Protection Co., Ltd., Hangzhou New Century Energy Yuan Environmental Engineering Co., Ltd.
The main drafters of this document are: Huang Jin, Guo Zhenning, Zhang Xiaoxin, Han Zhaoyu, Long Jisheng, Lin Ling, Yan Shengjun, Wang Lele, Zhang Jin, Zhao Kai, Liu Xiaomin, Wang Xiuteng, Xu Bingsheng, Cao Debiao, Yao Sheng, Wang Yubo, Zhang Aimin, Guo Huiting, Hou Shan, Liu Jing, Fang Fei, Mao Hongju, Liu Lin, Guo Yuwen, Jiao Yunyang, He Yang, Wang Yibo, Zhang Jianqiang, Tang Chang, Yang Mingxiang, Wei Chunzhong, Pan Zhicheng, Fu Shunkun, Zhan Huasheng, Zhang Wei, Guo Guangzhao, Fang Jianhua, Wang Chao, Zhou Qiang, Zhang Yajun, Yu Chunjiang, Li Zhuoge, Zhou Kaibin, Wang Yizhen, Cao Chuansheng, Yu Fengyuan, Lin Yong, Wang Sike, Yi Jinzheng, Ji Hongquan, Ran Maoguo, Wei Qiang, He Chuanshu, Zhang Xiaozhong.
Technical requirements for evaluation of high-efficiency grate furnaces
1 Scope
This document specifies the evaluation requirements, test methods, calculation methods and evaluation methods for high-efficiency grate furnaces.
This document applies to the evaluation of mechanical grate incinerators.
2 Normative references
GB/T 10184
GB/T 16157
GB 18485
GB/T 18750
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 grate furnace
A device that uses mechanical layered combustion to incinerate domestic waste.
3.2 primary burner
A device used to heat the furnace when starting and stopping the incinerator.
3.3 Auxiliary burner
A device used to maintain furnace temperature during operation.
3.4 furnace
A three-dimensional space for burning domestic waste, which is surrounded by the upper surface of the grate, the high-temperature flue gas outlet at the top of the first flue, and the furnace walls around the grate.
3.5 operating hours per year
High-efficiency grate furnace uptime over a one-year period. Note. The unit is hour (h).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of GB/T 44565
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 44565-2024 | Technical requirements of high efficiency grate furnace for assessment | current edition | Current |
This page sells the current edition, GB/T 44565-2024. Earlier editions are listed for reference only.
How to Buy GB/T 44565-2024
- 1Add to cart. Click the "Buy GB/T 44565-2024" button on this page. You can add more standards before checkout.
- 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
- 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10184-2025 — Performance test code for utility boilers
GB/T 16157-1996 — Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source
GB/T 18750-2022 — Municipal solid waste incinerator and heat recovery boiler
Secure payment via Stripe
Payments accepted
GB/T 44565-2024
$190.00