GB/T 44563-2024Titanium protruding head blind fastener for aerospace (English PDF)

航空用钛合金凸头大底脚螺纹抽芯铆钉

Open the GB/T 44563-2024 preview as PDF

Preview — first pages of GB/T 44563-2024 (full document: 15 pages)

This is a limited preview

Buy now to download the full PDF (15 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 29, 2024

Implementation date

April 1, 2025

Scope

GB/T 44563-2024 is the English-translated version of 航空用钛合金凸头大底脚螺纹抽芯铆钉.

GB/T 44563-2024 is the Chinese national standard covering the aerospace blind rivet with a protruding head, set from one side where the back of the joint cannot be reached — the assembled fastener with its dimensions and mass, the rivet body with its three locking points 120° apart, the mandrel, the sleeve, the locking ring and the drive nut, and the requirements for each part, since a mandrel that breaks early leaves a joint that only looks set. First edition, alongside the flush head version GB/T 44562-2024. In force from 1 April 2025. Issued on 29 September 2024, it has been in force since 1 April 2025.

Document preview — GB/T 44563-2024

National Standard of the People's Republic of China

ICS: 49.030.60
Classification: V 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

PrefaceIII
1 Scope1
2 Normative references1
3 Terms and Definitions1
4 Requirements1
4.1 Component1
4.2 Nail body3
4.3 Core rod5
4.4 Nail sleeve7
4.5 Ring8
4.6 Drive nut9

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed and coordinated by the National Aircraft Standardization Technical Committee (SAC/TC435).

This document was drafted by: China Aviation Technology Research Institute, Shenyang Aircraft Design and Research Institute of China Aviation Industry Corporation, Aerospace Manufacturing Technology Research Institute, Aerospace Precision Industry Co., Ltd.

The main drafters of this document are: Hou Kun, Li Haitao, Wang Shoucai, Liu Fenglei, Lü Ruilin and Zhang Xiaobin.

Titanium alloy convex head large foot threaded blind rivets for aviation

1 Scope

This document specifies the structure, size and technology of titanium alloy convex head large foot threaded blind rivets (hereinafter referred to as "blind rivets") for aviation Require.

This document applies to the design, manufacture and acceptance of titanium alloy protruding head large foot threaded blind rivets for aviation use.

2 Normative references

GB/T 90.2

GB/T 2965

GB/T 3078

GB/T 4237

GB/T 6403.3

GB/T 14994

GB/T 44562-2024

GB/T 22271.3-2016

3 Terms and definitions

There are no terms or definitions that require definition in this document.

4 Requirements

4.1 Components

4.1.1 Structure

The assembly structure of the blind rivet is shown in Figure 1, the dimensions and mass are shown in Table 1, and the usage example is shown in Figure 2.The locking points on the rivet body are evenly spaced along the circumference.

Evenly arrange 3 places (120° apart).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Editions of GB/T 44563

Edition	Title	Revision	Status
GB/T 44563-2024	Titanium protruding head blind fastener for aerospace	current edition	Current

This page sells the current edition, GB/T 44563-2024. Earlier editions are listed for reference only.

How to Buy GB/T 44563-2024

1Add to cart. Click the "Buy GB/T 44563-2024" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.