GB/T 44275.2-2024Industrial automation systems and integration - Open technical dictionaries and their application to master data - Part 2: Vocabulary (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document is part 2 of GB/T 44275 "Industrial Automation Systems and Integration Open Technology Dictionary and Its Application in Master Data" GB/T 44275 has published the following parts.

--- Part 1: Overview and basic principles;

--- Part 2: Terminology;

--- Part 11: Guidelines for the development of terminology;

--- Part 13: Identification of concepts and terms;

--- Part 20: Maintenance procedures for the open technical dictionary.

This document is equivalent to ISO 22745-2:2010 "Industrial automation systems and integration open technical dictionary and its application in master data" Part 2: Terminology.

This document adds a chapter on "Normative References".

Introduction

The descriptive technical system specified in GB/T 44275 includes.

---Open Technical Dictionary (OTD);

--- Identification Guide (IG);

---Master data;

---Identification mode;

---Procedures for maintaining OTD;

---Interface for querying information from OTD, including terms related to a given concept.

GB/T 44275 "Industrial Automation Systems and Integration Open Technology Dictionary and Its Application in Master Data" is intended to consist of the following parts.

--- Part 1: Overview and basic principles. The purpose is to explain the overall architecture, basic principles and Principles and basic concepts.

--- Part 2: Terminology. The purpose is to provide the terms and vocabulary used in the GB/T 44275 series of standards.

--- Part 10: Dictionary representation; The purpose is to provide a conceptual model of OTD for computer-to-computer exchange of OTD XML schema for the XML physical file.

--- Part 11: Guidelines for the development of terminology. The purpose is to provide guidelines for the development of terminology and the definition of concepts in open technical dictionaries.

--- Part 13: Identification of concepts and terms. The purpose is to identify concepts, terms, Definitions and image recognition rules, as well as the syntax of identifiers.

--- Part 14: Dictionary query interface. The purpose is to provide query interface definitions and web service bindings supported by OTD.

--- Part 20: Maintenance procedures for open technical dictionaries. The purpose is to standardize the maintenance procedures, publication rules, changes and Change programs, add programs, and maintain organizational structures.

--- Part 30: Identification Guide Representation. The purpose is to provide the conceptual model and exchange format of IG.

--- Part 35: Querying feature data. The purpose is to provide a conceptual model and exchange format for querying feature data.

--- Part 40: Master data representation. The purpose is to provide a conceptual model and exchange format for master data.

--- Part 50: Registration of Open Technical Dictionaries. The purpose is to provide the structure and operate.

--- Part.200.Implementation guidance for incorporating master data into ISO 10303 product data. The purpose is to provide guidance for incorporating master data into ISO 10303 product data.

General requirements for representing directory data in a data set using a protocol (AP).

--- Part 300: Master Data Guide. The purpose is to provide a common template for commonly used master data types.

OTD is a term defined and derived from consensus bodies such as ISO, IEC, and other organizations that have a consensus process for developing terminology.

OTD is a collection of terms used to describe concepts such as individuals, organizations, locations, goods, and services.

In GB/T 44275, items are described by membership in a class and a set of attribute values.

OTD.

--- Allows attributes to be explicitly defined in ISO 10303 documents;

--- Allows information to be clearly defined and exchanged between multinational partners without loss of meaning;

---Supports database synchronization with minimal data mapping requirements;

---Provide transparent information flow between multiple information formats, especially between government and commercial systems;

---Provide timely and accurate data to support financial and accounting processes;

---Support cost-effective procurement;

---Support inventory management and rationalization;

---Provide commercial and intergovernmental affairs;

---Support multiple units of measurement and international currencies;

---Support multiple categories and multiple languages.

Any consensus organization can submit terms for inclusion in the OTD. GB/T 44275 does not establish a new process for standardizing terms.

Each OTD will provide a globally unambiguous identifier for each concept and provide a reference to the original term (term, definition and image).

The OTD aims to link terms and definitions with the same semantic content and to cite the original source of each term and definition.

Duplicate existing standards and instead provide a comprehensive collection of terms for describing people, organizations, locations, goods, and services.

Although the process of harmonizing terminology is beyond the scope of GB/T 44275, the OTD can be used as a useful research tool to assist in the coordination of Coordination process, such as the coordination process between ISO, IEC and other standards.

The IG specifies which concepts are used and constrains which concepts are linked to each other. An example of the latter is that the IG specifies which attributes can be linked to a class.

In addition, where there are multiple terms, definitions, and images for a concept, the IG specifies which terms, definitions, and images are applicable.

Master data is data held by an organization that describes entities that are both independent and fundamental to the organization and that need to be referenced in order to be used.

Execute its business.

A directory represents master data in the form of attribute-value pairs.

Industrial Automation Systems and Integration Open Technology Dictionary and its application in master data Part 2: Terminology

1 Scope

This document contains the terms used in all parts of GB/T 44275.

The following contents fall within the scope of this document.

--- Terms related to OTD (18.4) and their application to master data (15.9).

This document contains.

--- Terms defined in GB/T 44275;

--- Terms defined in other standards and referenced in GB/T 44275.

Appendix A specifies the identification of this document in information systems.

2 Normative references

This document has no normative references.

3 Terminology related to objects, classes, and properties

class

A group of objects (3.3) having common characteristics.

Example. "telephone", "table", "chair", "ball bearing", and "tennis ball" are all classes.

property

The quality or characteristic of an object.

object

Anything that can be felt or imagined.

Note 1.Objects include both objective and observable things (concrete things like trees and houses, abstract things like prices and freedom), and imaginary things (such as gods and spirits).

(Talking Characters).

Note 2.The radial flow centrifugal pump with serial number AX52386 is an object. Its general structure is defined by the radial flow centrifugal pump class.

[Source. GB/T 15237.1-2000, 3.1.1, modified]

4 Terms related to grammar

noun phrase

A sequence of one or more words that functions as subject, object, or object of a preposition in a sentence.

Example. The sequence of words "machine bolts" is a noun phrase.