GB/T 44091-2024Product identification requirements for civil unmanned aircraft (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting:

Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:

This document was proposed and coordinated by the National Aircraft Standardization Technical Committee (SAC/TC435):

The drafting units of this document: Puzhou Technology Co:, Ltd:, China Aviation Integrated Technology Research Institute, and Shenzhen Meituan Low-altitude Logistics Technology Co:, Ltd:

The main drafters of this document are: Huang Li, Shu Zhenjie, Chen Hu, Zhang Zejing, Hu Qian, Hu Yingdong, Xue Yuan, Tang Jian, Huang Wensheng, Luo Xuetao, Liu Huabin, Wang, J:-Y:, Chen, B:, He, Z:-Q:, Wu, C:-L:, and Jia, J:

Product Labeling Requirements for Civil Unmanned Aerial Vehicles

1 Scope

This document specifies the content, location and style of the markings on civil unmanned aerial vehicle products:

This document applies to the design and use of product labels for micro, light and small civil unmanned aerial vehicles:

2 Normative references

GB/T 38152

GB/T 41300

GB 42590

3 Terms and definitions

The terms and definitions defined in GB/T 38152, GB 42590 and the following apply to this document: 3:1 Used to describe the basic information, unique product identification code, classification, risk warnings, usage tips, etc: of unmanned aerial vehicle products Logo:

4 General requirements

The general requirements for product labeling of civil unmanned aerial vehicles should meet the following requirements:

a) The recorded and stated information is consistent with the actual situation of the product and is authentic, valid and easy to identify;

b) The markings on the machine body are clear, firm, durable, and attached to an integral part of the machine body that can be viewed without the aid of any tools:

On the surface, it is done by pasting, spraying, embossing or laser engraving:

5 Detailed requirements

5:1 Label content 5:1:1 Basic product information The basic information of the product should include product name, model, product serial number, manufacturer, production date and other information:

5:1:2 Unique Product Identification Code The compilation and labeling of unique product identification codes shall comply with the requirements of GB/T 41300: