GB/T 43857-2024Safety and management requirements for teaching facilities (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document is proposed by the Ministry of Education of the People's Republic of China: This document is under the jurisdiction of the National Technical Committee for Standardization of Educational Equipment (SAC/TC125): This document was drafted by: Education Technology and Resources Development Center of the Ministry of Education (Central Audiovisual Education Center), China National Institute of Standardization, Tsinghua University Nankai University, Beijing Normal University, Zhejiang Education Technology Center, China University of Metrology, North China Electric Power University, Beijing Chaoyang District Aidi Foreign Language School Chinese language school: The main drafters of this document are: Dang Jianwei, Zhang Yaodong, Zhu Xiaocui, Qi Geqi, Hou Fei, Ai Desheng, Zhao Huiying, Sun Zhen, Sun Qian, Liu Junbo, Zhang Pengyi, Li Song, Yang Feng, Ren Weide, Zhang Min, Zhao Xiang, Cao Lili, Wang Sen, Shi Liwu, Liu Junhua, Jiang Weidi, Zeng Yi, Xing Liqiang, Yan Zongliang, Zhou Youyou, Xu Shengping, and Tian Haixin: Safety and management requirements for teaching facilities

1 Scope

China's national safety and management requirements for teaching facilities. The scope is the school itself as a physical environment and the arrangements for keeping the people in it safe, which covers a wider range than a building code does: the structural and fire safety of the premises, the equipment in laboratories and workshops, the sports facilities, the food service, the transport, and the management systems that keep all of it in order. The management half is what such a standard adds. A school's hazards are not unusual individually - they are those of a building, a kitchen, a laboratory and a playground - but the population is uniquely vulnerable, changes every year, and does not assess risk for itself. So the requirements concentrate on the responsibilities: who inspects what and how often, who is trained, how an incident is reported and how the emergency arrangements are exercised.

This document proposes the safety principles for school teaching facilities, and stipulates general requirements, safety technical requirements, safety management requirements and safety Requirements: This document applies to the design, installation, purchase, use and maintenance of teaching facilities for newly built, renovated and expanded colleges, vocational schools, and ordinary primary and secondary schools: The teaching facilities of training institutions, practical training centers and other related teaching institutions can be used as a reference:

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document:

GB/T 150 (all parts) Pressure vessels

GB/T 1002 Types, basic parameters and dimensions of single-phase plugs and sockets for household and similar purposes

GB/T 1003 Types, basic parameters and dimensions of three-phase plugs and sockets for household and similar purposes

GB 2626 Respiratory protection Self-priming filter type anti-particulate respirator

GB 2811 Head protection helmet

GB 2890 Respiratory protection self-priming filter type gas mask GB/T 2893:

1 Graphic symbols, safety colors and safety signs Part 1: Design principles for safety signs and safety markings GB/T 2893:

2 Graphic symbols, safety colors and safety signs Part 2: Design principles for product safety labels GB/T 2893:

5 Graphic symbols, safety colors and safety signs Part 5: Principles and requirements for the use of safety signs

GB 2894-2008 Safety signs and their use guidelines

GB/T 3324 General technical requirements for wooden furniture

GB/T 3325 General technical requirements for metal furniture GB/T 3836:

1 Explosive atmospheres Part 1: General requirements for equipment GB/T 3836: