GB/T 43487-2023Test methods for foamed concrete and its products (English PDF)
泡沫混凝土及制品试验方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43487-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 28, 2023
Implementation date
July 1, 2024
Scope
GB/T 43487-2023 is the English-translated version of 泡沫混凝土及制品试验方法.
GB/T 43487-2023 is the Chinese standard "Test methods for foamed concrete and its products".
Its scope clause reads: This document describes the test methods and test reports for various properties of foam concrete and products: This document applies to foam concrete and products used in construction, transportation, water conservancy, municipal administration, mining and other projects:. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 43487-2023
National Standard of the People's Republic of China
- ICS
- 91.100.30
- Classification
- Q 14
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Test environment and test conditions
- 5 Specimen preparation
- 6 Mixture fluidity
- 7 Mixture wet density
- 8 Dimensional deviation
- 9 Appearance quality
- 10 Dry apparent density
- 11 Compressive strength
- 12 Tensile strength
- 13 Water absorption rate
- 14 2h volume water absorption rate
- 15 Moisture content and relative moisture content
- 16 Thermal conductivity
- 17 Heat storage coefficient
- 18 Shrinkage
- 19 Drying shrinkage value
- 20 Softening factor
- 21 Carbonization performance
- 22 Anti-freeze performance
- 23 Test report
1 Scope
This document describes the test methods and test reports for various properties of foam concrete and products:
This document applies to foam concrete and products used in construction, transportation, water conservancy, municipal administration, mining and other projects:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:
GB/T 4132 Thermal insulation materials and related terms
GB/T 10294 Determination of steady-state thermal resistance and related characteristics of thermal insulation materials - Protected hot plate method
GB/T 10295 Heat flow meter method for determination of steady-state thermal resistance and related characteristics of thermal insulation materials
GB/T 18968 Wall material terminology
JG/T 237 Concrete test form
JGJ/T 12-2019 Technical Standard for Application of Lightweight Aggregate Concrete
3 Terms and definitions
The terms and definitions defined in GB/T 4132 and GB/T 18968 and the following apply to this document:
3:1 foamedconcretefoamedconcrete
It uses cement, aggregates, admixtures, foaming agents or blowing agents, admixtures, water, etc: as the main raw materials and is made by physical or chemical foaming processes:
Lightweight porous cement-based material:
Note: Also called foamed concrete:
3:2 cast-in-placefoamedconcrete
Foam concrete for on-site casting (3:1):
3:3
Products made from foam concrete (3:1):
Note: According to product form, there are foam concrete blocks, foam concrete insulation panels, etc:
3:4 foamedconcreteblocksfoamedconcreteblocks
Blocks made of foam concrete (3:1):
Note: Also called foamed concrete blocks, referred to as blocks:
3:5
Lightweight insulation board made of foam concrete (3:1):
GB/T 33544 | GB 13476 | TB/T 2922.5 | GB/T 19496 | GB/T 16308 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4132Thermal insulation - Vocabulary
- GB/T 10294Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Guarded hot plate apparatus
- GB/T 10295Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus
- GB/T 18968Terms of wall materials
Editions of GB/T 43487
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 43487-2023 | Test methods for foamed concrete and its products | current edition | Current |
This page sells the current edition, GB/T 43487-2023. Earlier editions are listed for reference only.
How to Download GB/T 43487-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10294-2008 — Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Guarded hot plate apparatus
GB/T 10295-2008 — Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus
GB/T 18968-2019 — Terms of wall materials
Secure payment via Stripe
Payments accepted
GB/T 43487-2023
$360.00