Valid

GB/T 43460.1-2023Electromagnetic compatibility - Risk analysis methods - Part 1: Cable shielding (English PDF)

电磁兼容 风险分析方法 第1部分:电缆屏蔽

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43460.1-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2023

Implementation date

July 1, 2024

Scope

GB/T 43460.1-2023 is the English-translated version of 电磁兼容 风险分析方法 第1部分:电缆屏蔽.

GB/T 43460.1-2023 is the Chinese standard "Electromagnetic compatibility - Risk analysis methods - Part 1: Cable shielding".

Its scope clause reads: This document gives the classification of cable shielding risk factors, risk analysis procedures, risk sub-elements, data measurements, data deviation values, risk Evaluated value and risk level: This document applies to direct-connect shielded cables and connector shielded cables:.

Its clauses include normative reference documents; terms, definitions and abbreviations.

Found what you need?

Document preview — GB/T 43460.1-2023

National Standard of the People's Republic of China

ICS
33.100
Classification
L 06

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms, definitions and abbreviations
  • 4 Shielded cable classification
  • 5 Risk Analysis Procedure
  • 6 Risk sub-element
  • 7 Data Measurement
  • 8 Data deviation value
  • 9 Risk assessment value and risk level
  • Appendix A (Informative) Risk Analysis Procedure for Risk Elements
  • Appendix B (informative) Relationship between risk assessment value and “pig tail” length
  • Appendix C (informative) Relationship between risk assessment value and surface transfer impedance
  • Appendix D (informative) Relationship between risk assessment value and shielding attenuation

1 Scope

This document gives the classification of cable shielding risk factors, risk analysis procedures, risk sub-elements, data measurements, data deviation values, risk

Evaluated value and risk level:

This document applies to direct-connect shielded cables and connector shielded cables:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations

For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 17737:1-2013 Coaxial communication cables Part 1: General specifications, definitions and requirements

GB/T 31723:406-2015 Test methods for metal communication cables Part 4-6: Electromagnetic compatibility surface transferred impedance line Note

Enter the law

GB/T 38659:3-2022 Electromagnetic compatibility risk assessment Part 3: Equipment risk analysis method

GB/T 38659:4-2022 Electromagnetic compatibility risk assessment Part 4: System risk analysis method

T/CSAE189-2021 Surface transfer impedance test method for electric vehicle high-voltage shielded cables and connectors

IEC 62153-4-3:2013 Test methods for metallic communication cables Part 4-3: Electromagnetic compatibility surface transferred impedance triaxial method

IEC 62153-4-4:2015 Test methods for metallic communication cables Part 4-4: Electromagnetic compatibility up to 3GHz and above axialmethod]

IEC 62153-4-6:2017 Test methods for metallic communication cables and other passive components Part 4-6: Electromagnetic compatibility surface transfer

IEC 62153-4-15:2021 Test methods for metallic communication cables and other passive components Part 4-15: Triplex for electromagnetic compatibility

3 Terms, definitions and abbreviations

3:1 Terms and definitions

The following terms and definitions as defined in GB/T 17737:1-2013 and GB/T 37123:406-2015 apply to this document:

GB/T 46130 | GB/T 43248 | GB/T 40309 | GB/T 48008 | GB/T 18487.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 17737 · GB/T 31723 · GB/T 38659 · IEC 62153

Editions of GB/T 43460.1

EditionTitleRevisionStatus
GB/T 43460.1-2023Electromagnetic compatibility - Risk analysis methods - Part 1: Cable shieldingcurrent editionCurrent

This page sells the current edition, GB/T 43460.1-2023. Earlier editions are listed for reference only.

How to Download GB/T 43460.1-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 43460.1-2023

$300.00