GB/T 43053-2023Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (English PDF)

National Standard of the People's Republic of China

ICS

47.020.70

Classification

U 65

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

• 1 Scope
• 2 Normative reference documents
• 3 Terms, definitions and abbreviations 3
• 3.1 Terms and Definitions
• 3.2 Abbreviations
• 4 Minimum operating and performance requirements 8
• 4.1 General
• 4.2 ECDIS definition
• 4.3 SENC information display
• 4.3.1 SENC
• 4.3.2 Application instructions for non-HO data sources 9
• 4.3.3 Display category
• 4.3.4 Safety contour 10
• 4.3.5 Safe water depth
• 4.3.6 Information content 10
• 4.3.7 Confirmation and Update
• 4.3.8 Information related to chart targets 10
• 4.3.9 Display scale
• 4.4 Provision and update of nautical chart information
• 4.4.1 Contents of SENC11
• 4.4.2 Update
• 4.5 Ratio
• 4.6 Display of other navigation information
• 4.6.1 General requirements
• 4.6.2 Radar information 12
• 4.6.3 AIS information
• 4.6.4 AIS target data
• 4.6.5 AIS navigation related data
• 4.6.6 AISCPA/TCPA alarm
• 4.6.7 AIS lost target warning
• 4.6.8 Anchor monitoring
• 4.7 Display mode and generation of adjacent areas
• 4.8 Colors and symbols
• 4.9 Display requirements
• 4.9.1 Route design and monitoring 18
• 4.9.2 Chart display size
• 4.9.3 Color and resolution
• 4.9.4 Display
• 4.9.5 Deletion of information type
• 4.10 Route design, monitoring and navigation records 19
• 4.10.1 General requirements
• 4.10.2 Route design
• 4.10.3 Route monitoring
• 4.10.4 Location integration
• 4.10.5 Target information
• 4.10.6 LOP positioning
• 4.10.7 Voyage records
• 4.11 Calculation and accuracy
• 4.12 Connections to other devices (interfaces)
• 4.12.1 Connecting with navigation equipment
• 4.12.2 Connecting with BAM
• 4.12.3 Connecting to VDR
• 4.12.4 Connecting with BNWAS
• 4.12.5 Connecting with SENC information
• 4.12.6 NAVTEX and SafetyNet for MSI connections
• 4.12.7 Connection for route information transmission
• 4.12.8 Connecting to INS
• 4.13 Performance test, fault alarm and indication
• 4.14 Backup device
• 4.15 Power
• 4.16 Software maintenance
• 4.17 Quality management requirements
• 4.18 Default control settings and saved user control settings
• 5 Requirements contained in IHO publications
• 5.1 Priority of chart display
• 5.2 Chart information display
• 5.2.1 Scale and navigation objectives 30
• 5.2.2 Units and Legend
• 5.2.3 Terminology
• 5.3 Chart function
• 5.3.1 Cursor selection
• 5.3.2 Navigation information 31
• 5.3.3 Date-related ENC goals 31
• 5.4 Alias function
• 5.4.1 Additional crew information 31
• 5.4.2 Additional non-HO information 32
• 5.4.3 Tidal adjustment
• 5.5 Use of display libraries
• 5.5.1 Display library
• 5.5.2 Test chart
• 5.6 Display characteristics
• 5.7 Performance requirements
• 5.7.1 Redraw
• 5.7.2 Resolution
• 5.7.3 Symbol
• 5.7.4 Number of colors
• 5.7.5 Brightness and Contrast
• 5.8 Ergonomic requirements
• 5.8.1 Mode and direction
• 5.8.2 Window
• 5.9 Chart information update
• 5.9.1 General
• 5.9.2 Manual update
• 5.9.3 Semi-automatic updates
• 5.9.4 Receiving updates
• 5.9.5 Sequence Check
• 5.9.6 Consistency check
• 5.9.7 Geographical applicability
• 5.9.8 Summary report
• 5.9.9 ENC update review
• 5.9.10 Update Fix
• 5.10 Operating area
• 5.11 External removable storage media 38
• 6 Test methods and required test results 38
• 6.1 Installation, technical documentation and testing requirements for the equipment under test 38
• 6.2 Interface
• 6.2.1 General requirements
• 6.2.2 BAM interface
• 6.2.3 VDR interface
• 6.2.4 BNWAS interface
• 6.3 General requirements and display requirements
• 6.3.1 General requirements
• 6.3.2 Display requirements
• 6.4 Preparation
• 6.4.1 Power on
• 6.4.2 Initial ship parameters
• 6.4.3 Required test data
• 6.5 ENC chart related requirements
• 6.5.1 General requirements
• 6.5.2 Display library
• 6.5.3 ENC
• 6.5.4 Encrypted ENC
• 6.6 Accuracy
• 6.7 Visual requirements
• 6.7.1 Symbol
• 6.7.2 Terminology, units and legends
• 6.7.3 Color table
• 6.7.4 Resolution
• 6.7.5 Display characteristics
• 6.8 Functional requirements
• 6.8.1 Test method
• 6.8.2 Standard display
• 6.8.3 Basic display
• 6.8.4 All other information
• 6.8.5 View group layer and text group layer
• 6.8.6 Display priority
• 6.8.7 Additional display functions
• 6.8.8 Scale and navigation objectives
• 6.8.9 Mode and direction
• 6.8.10 Safety contour
• 6.8.11 Safe water depth
• 6.8.12 Cursor selection
• 6.8.13 Navigation related functions
• 6.8.14 Location integration
• 6.8.15 Radar and other navigation information
• 6.8.16 Loading corrupted data
• 6.8.17 Automatic update
• 6.8.18 Manual update
• 6.8.19 Self-test of main functions
• 6.8.20 Operating area
• 6.8.21 External removable storage media
• 6.9 Operating requirements
• 6.9.1 Principles of Ergonomics
• 6.9.2 Route design
• 6.9.3 Route monitoring
• 6.9.4 12h log
• 6.9.5 Voyage records
• 6.9.6 Power supply
• 6.9.7 LOP positioning
• 6.10 Software maintenance
• 6.11 Quality Management
• 6.12 Default control settings and saved user control settings
• 6.13 AIS information and AIS target data
• 6.13.1 General
• 6.13.2 AIS target and data recording capacity
• 6.13.3 AIS target filtering
• 6.13.4 Activation and dormancy of AIS targets
• 6.13.5 AIS function and display
• 6.13.6 AIS target data
• 6.13.7 AISCPA/TCPA alarm
• 6.13.8 AIS lost target warning
• 6.14 AIS navigation related data
• 6.15 Anchor monitoring
• 6.16 NAVTEX and SafetyNet for MSI connections
• 6.17 Route information transmission interface
• 6.18 Interface with INS
• Appendix A (Normative) SENC information displayed in route planning and route monitoring
• Appendix B (Normative) Navigation elements and parameters
• Appendix C (Normative) Geographic areas with special conditions
• Appendix D (Normative) Alarms and Instructions
• Appendix E (Normative) Mandatory terms and abbreviations
• Appendix F (Normative) Backup Device
• Appendix G (Normative) ECDIS 83 for RCDS operating mode
• Appendix H (normative) Alarms and indications in RCDS operating mode
• Appendix I (Normative) Scheme Definition and Plotting
• Appendix J (Informative) Geodetic Calculation Guide
• Appendix K (Informative) Test Guide
• Appendix L (informative) ENC update status report example
• Appendix M (normative) Composition of electronic chart database
• Appendix N (informative) Use cases of safety contours and safe water depth
• Appendix O (informative) Guidelines for the use of electronic chart systems in polar waters
• Appendix P (normative) Options for polar regions above 85° north latitude
• Appendix Q (normative) IEC 61162 interface
• Appendix R (informative) Conversion between IEC 61162-1 statements and IEC 61162-3 parameter group numbers
• Appendix S (Normative) Route Design Exchange Format-RTZ
• Appendix T (Normative) Report route transmission interface
• Appendix U (normative) Statements used by SafetyNET
• Appendix V (normative) TTD statement extension, protocol version 1
• Appendix W (Normative) Symbol
• Reference
• Figure F.1 Backup system logical interface
• Figure I.1 Route composition definition
• Figure I.2 Route 105 of Option
• Figure I.3 Route 106 of Option
• Figure I.4 Route 109 of Option
• Figure L.1 ENC update status report (overview section) example
• Figure L.2 Complete ENC update status report example
• Figure L.3 ENC route update status report example
• Figure P.1 Table usage example
• Figure Q.1 ECDIS logical interface
• Figure Q.2 ECDIS warning non-escalated alarm record
• Figure Q.3 Alarm record of ECDIS warning upgraded to alarm
• Figure Q.4 Alarm record of ECDIS remote acknowledgment of alarm
• Figure Q.5 Alarm record of ECDIS remote acknowledgment of alarm
• Figure Q.6 Alarm record of ECDIS remote acknowledgment of alarm
• Figure Q.7 Alarm record of ECDIS remote acknowledgment of alarm
• Figure S.1 Representation of route design---distance between WP2 and WP3
• Figure S.2 Representation of route design---segment range of WP3
• Figure S.3 UML diagram
• Figure T.1 Example of route transmission timing
• Figure T.2 RRT statement example
• Figure U.1 SM1 statement format
• Figure U.2 SM2 statement format
• Figure U.3 SM3 statement format
• Figure U.4 SM4 statement format
• Figure U.5 SM5 statement format
• Table 1 Tracking target display capability 12
• Table 2 AIS display processing capabilities
• Table 3 Default control settings [Appendix 6 in IMOMSC.252(83).2007]
• Table 4 Definition of "Performance Check" and "Performance Test"
• Table 5 Initial ship parameters
• Table D.1 Alarms and indications required by IMO
• Table D.2 Alarms and indications specified in this document 64
• Table E.1 Chart display terminology
• Table E.2 Main functional terms
• Table E.3 Basic display terminology
• Table E.4 Terms related to routes, route monitoring or route design 70
• Table F.1 Parameters of EUT simulation test input
• Table H.1 Alarms and indications in RCDS operating mode
• Table I.1 Boston to Rotterdam Rectangular Line/Great Circle Route Atlantic Track
• Table I.2 Composite track 105 of scheme
• Table I.3 Composite track 106 of scheme
• Table I.4 Composite trajectory of scheme
• Table J.1 Rectangular line distance
• Table J.2 Great circle distance deviation
• Table M.1 ECDIS View Group Level Crew Option Minimum Requirements
• Table M.2 Minimum requirements for ECDIS text layer group options
• Table P.1 Space control point starting from 85°N, 0°E
• Table P.2 Space control point 132 starting from 87°N, 0°E
• Table P.3 Space control point starting from 89°N, 0°E
• Table P.4 Spatial control points starting from 90°N, 0°E, 180°E as the starting point of relative orientation
• Table Q.1 Statements forced to be received by ECDIS
• Table Q.2 ECDIS optional received statements
• Table Q.3 Statements forced to be sent by ECDIS
• Table Q.4 ECDIS optional sent statements
• Table Q.5 Information forced to be sent to the VDR
• Table Q.6 Messages between ECDIS and backup ECDIS systems
• Table R.1 Conversion of IEC 61162-1~IEC 61162-3
• Table R.2 Conversion of IEC 61162-3~IEC 61162-1
• Table S.1 Properties of RouteInfo node information storage
• Table S.2 Attributes of Waypoint node information storage
• Table S.3 Properties of Position node information storage
• Table S.4 Attributes of Leg node information storage
• Table S.5 Properties of ScheduleElement node information storage
• Table S.6 Attributes of Extension node information storage
• Table V.1 TTD Statement Protocol Version 1
• Table W.1 Anchor monitoring symbols