GB/T 42126.1-2022Industrial wireless communication specification based on cellular networks—Part 1: General technical requirements (English PDF)
基于蜂窝网络的工业无线通信规范 第1部分： 通用技术要求
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42126.1-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2022
Implementation date
July 1, 2023
Scope
GB/T 42126.1-2022 is the English-translated version of 基于蜂窝网络的工业无线通信规范 第1部分： 通用技术要求.
GB/T 42126.1-2022 is the first part of the Chinese national specification for industrial wireless communication carried over cellular networks, and it holds the general technical requirements.
It describes the industrial cellular connection and access arrangement and the basic data flows, both IP-based and Ethernet-based, then sets the functional requirements, the management requirements for cellular network equipment, the performance indicators and the requirements on the access sublayer; its informative annexes cover public and non-public networking modes and worked scenarios for industrial robots, personnel skill checking, logistics AGV fleet scheduling and remote control.
It applies to the planning, design, construction and optimisation of such systems. Its introduction states that GB/T 42126 is proposed in six parts. Issued on 30 December 2022, it has applied since 1 July 2023.
Found what you need?
Document preview — GB/T 42126.1-2022
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 Industrial wireless communication system based on cellular network
- 5.1 Industrial cellular network connection and access
- 5.2 Basic data flow
- 6 General requirements for industrial cellular networks
- 6.1 Overview
- 6.2 Functional requirements
- 6.3 Management requirements for cellular network equipment
- 6.4 Performance indicators
- 7 Industrial cellular network access sublayer requirements
- Appendix A (Informative) Networking Mode of Industrial Cellular Network
- A.1 Overview
- A.2 Public network networking mode
- A.3 Non-public network networking methods
- Appendix B (informative) Scenario example of industrial robot based on industrial 5G cellular network
- B.1 Scenario overview
- B.2 General requirements
- B.3 Functional requirements
- C.1 Scenario overview
- C.2 General requirements
- C.3 Cellular Network Deployment
- Appendix D (Informative) Logistics AGV Cluster Scheduling Based on Industrial 5G Cellular Network
- D.1 Scenario overview
- D.2 General requirements
- D.3 Cellular network deployment
- Appendix E (Informative) Example of Remote Control Scenario Based on Industrial 5G Cellular Network
- E.1 Scenario overview
- E.2 General requirements
- E.3 Cellular network deployment
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
This document is part 1 of GB/T 42126 "Industrial Wireless Communication Specifications Based on Cellular Networks".
GB/T 42126 has issued the following parts.
--- Part 1: General technical requirements.
Introduction
Cellular network wireless communication technology (abbreviation. "cellular network") is constantly evolving and has now reached the fifth generation. Currently, cellular network-based Industrial wireless communication (abbreviation. "industrial cellular network") is gradually meeting the requirements of low latency, large bandwidth, wide connection and flexible networking in industrial scenarios.
Communication network application requirements. For example. Manufacturers can connect assets such as manufacturing equipment, sensors, controllers, tools, and materials over an industrial cellular network It can also connect the information system with the equipment, and provide relevant parties with richer operable, traceable, and locatable information to help Transformation of industry to digitization, informatization and intelligence. With the continuous evolution of cellular network wireless communication technology, industrial cellular networks will be Broadband, latency, and availability continue to improve, empowering more industrial application scenarios.
This document is the basic standard to guide the application of cellular networks in industrial sites, aiming to ensure that industrial cellular networks can be adapted to industrial scenarios Requirements are proposed to be composed of 6 parts.
--- Part 1: General technical requirements. The purpose is to establish the overall technical requirements applicable to various industrial sites that need to be followed.
--- Part 2: Communication profiles. The purpose is to establish the communication profile requirements applicable to industrial sites.
--- Part 3: Test specifications. The purpose is to determine compliance with the industry's communication profile test specifications.
--- Part 4: Safety requirements. The purpose is to enable the safe operation and management of cellular networks.
--- Part 5: Application specifications. The purpose is to better apply the cellular network in the industrial field, and facilitate the wide application of all relevant parties.
--- Part 6: Acceptance specifications. The purpose is to meet the actual requirements of all relevant parties after the cellular network is established according to the above requirements.
1 Scope
This document specifies the general technical requirements for industrial wireless communication systems based on cellular networks.
This document applies to the planning, design, construction and optimization of industrial wireless communication systems based on cellular networks.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 9387.1-1998 Information Technology Open System Interconnection Basic Reference Model Part 1: Basic Model
GB/T 29246 Information Technology Security Technical Information Security Management System Overview and Vocabulary
GB/T 31722 Information Technology Security Technology Information Security Risk Management
IEC 61784-2 Industrial communication network profile Part 2: Additional fieldbus based on ISO /IEC 8802-3 real-time network networks based on ISO /IEC /IEEE8802-3) controlsystems)
3 Terms and Definitions
GB/T 9387.1-1998, IEC 61784-2 and the following terms and definitions apply to this document.
3.1 Real-time
The ability of a system to provide the required results within a limited time. [Source: IEC 61784-2:2014, 3.1.19]
3.2 Application layer
Consists of several application entities cooperating in the OSI environment. [Source: GB/T 9387.1-1998, 6.1.4, modified]
3.3 industrial application
A function or data structure that consumes or produces data.
Note: Industrial applications include applications for industrial automation control, equipment management, logistics management, etc.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 9387.1-1998Information technology. Open Systems Interconnection. Basic Reference Model. Part 1: The Basic Model
- GB/T 29246Information security technology - Information security management systems - Overview and vocabulary
- GB/T 31722Cybersecurity technology - Guidance on managing information security risks
IEC 61784-2
Similar standards
How to Download GB/T 42126.1-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29246-2023 — Information security technology - Information security management systems - Overview and vocabulary
GB/T 31722-2015 — Information technology -- Security techniques -- Information security risk management
GB/T 31722-2025 — Cybersecurity technology - Guidance on managing information security risks
Secure payment via Stripe
Payments accepted
GB/T 42126.1-2022
$255.00