Valid

GB/T 41923.1-2022Three-dimensional process planning for mechanical products—Part 1: Terms and definitions (English PDF)

机械产品三维工艺设计 第1部分:术语和定义

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41923.1-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 9, 2022

Implementation date

October 1, 2022

Scope

GB/T 41923.1-2022 is the English-translated version of 机械产品三维工艺设计 第1部分:术语和定义.

GB/T 41923.1-2022 is the first part of the Chinese series on the three-dimensional process planning of mechanical products, and it fixes the vocabulary.

It defines the terms used in model-based process design: the process model itself, the operations and their elements, the resources, the annotations carried by the model and the documents derived from it.

It applies to the use, development, service and research of three-dimensional process design based on model definition. Manufacturers, CAM and PLM suppliers and process engineers use it. Issued on 9 March 2022, it has applied since 1 October 2022.

Found what you need?

Document preview — GB/T 41923.1-2022

National Standard of the People's Republic of China

ICS
01.100.01
Classification
J 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Basic Terminology
  • 4 Model term
  • 5 Checklist term
  • 6 Data terms
  • Reference
  • index

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

This document is Part 1 of GB/T 41923 "3D Process Design of Mechanical Products". GB/T 41923 has published the following parts.

--- Part 1: Terms and Definitions;

--- Part 2: General requirements;

--- Part 3: Model construction;

--- Part 4: Process symbols and markings;

--- Part 5: Detailed design;

--- Part 6: Data requirements;

--- Part 7: Issue requirements.

Introduction

With the gradual application and popularization of 3D computer-aided design (CAD) technology, and model-based definition (MBD) technology in manufacturing The implementation within the enterprise, the development mode and development process of mechanical products have undergone major changes, and the 3D digital model has replaced the 2D drawings.

It has gradually become the only basis for product development, which is a huge change in terms of technology, management and ideas. this The changes make it difficult for the traditional two-dimensional process design standards to be applied to the process design in the three-dimensional environment. In order to effectively solve the three-dimensional work of manufacturing enterprises To solve the bottleneck problem in the application of art design technology, promote the popularization and engineering application of three-dimensional process design technology, and formulate GB/T 41923 "Mechanical Production Product 3D Process Design. According to the working process of three-dimensional process design of mechanical products, it is planned to be composed of seven parts.

--- Part 1: Terms and Definitions. The purpose is to standardize the terms and definitions related to the three-dimensional process design of mechanical products, and to unify the related terms and definitions. concepts and avoid communication difficulties, ambiguities and misunderstandings caused by unclear concepts and terminology.

--- Part 2: General requirements. The purpose is to classify the three-dimensional process design of mechanical products, the general process and the communication of each key link.

Based on the requirements, it focuses on solving the common problems existing in the three-dimensional process of mechanical products, and gives relevant technical requirements.

--- Part 3: Model construction. The purpose is to standardize how to build and transfer the process and step models in the three-dimensional process design of mechanical products.

It focuses on solving problems such as the process and common requirements of process and step model construction in the process of 3D process design of mechanical products. Avoid rework caused by inconsistent design habits.

--- Part 4: Process symbols and markings. The purpose is to standardize machining, sheet metal, welding and assembly in the three-dimensional process design of mechanical products.

Match the symbol content, representation and three-dimensional labeling requirements of typical process symbols, and provide basis for the labeling of process symbols in a three-dimensional environment. data and guidance.

--- Part 5: Detailed design. The purpose is to standardize machining, sheet metal, welding and The basic process and technical requirements of typical process design such as assembly provide the basis and technical requirements for the detailed design of three-dimensional process design of mechanical products guide.

--- Part 6: Data requirements. The purpose is to standardize the data classification, data exchange and sharing requirements in the three-dimensional process design of mechanical products.

It focuses on solving the problems of unclear data transfer deliverables and incomplete data at various stages in the 3D process design process of mechanical products. question.

--- Part 7: Issue requirements. The purpose is to standardize the distribution content related to the distribution of process results in the three-dimensional process design of mechanical products, The release form and technical requirements provide basis and guidance for the release of process results in a three-dimensional environment.

1 Scope

This document defines terms and definitions related to the three-dimensional process design of mechanical products.

This document applies to the application, development, service and research of 3D process design of mechanical products based on model definition.

2 Normative references

There are no normative references in this document.

3 Basic terminology

3.1 Three-dimensional process design

Based on the 3D design model, it is characterized by the 3D construction, 3D expression, storage and release of process information, which is used for manufacturing, inspection, service, etc.

This section provides intuitive, directly usable 3D data for process activities.

Note: 3D process design is a process design method using a 3D model as a process information carrier.

3.2 Three-dimensional process document

3D model-based, interactive, various technical documents for guiding worker operations and for production, process management, etc.

3.3 Processresource

A general term for the resources required in the product process design process. [Source: GB/T 26102-2010, 3.4]

3.4 Processroute

In the production process of products or parts, from blank preparation to finished product packaging and storage, through the successive steps of relevant departments or processes of the enterprise order. [Source: GB/T 4863-2008, 3.1.13]

3.5 Process

The process of changing the shape, size, relative position or nature of a production object to make it a finished or semi-finished product. [Source: GB/T 4863-2008, 3.1.10]

3.6 Process parameter

In order to achieve the expected technical indicators, the relevant quantities that need to be selected or controlled in the process. [Source: GB/T 4863-2008, 3.1.18]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Similar standards

How to Download GB/T 41923.1-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
21 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41923.1-2022

$135.00