GB/T 41804-2022Information technology - Evaluation methodology for environmental influence in biometric system performance (English PDF)
信息技术 生物特征识别系统性能环境影响的评价方法
This is a limited preview
Buy now to download the full PDF (44 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41804-2022 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 14, 2022
Implementation date
May 1, 2023
Scope
GB/T 41804-2022 is the English-translated version of 信息技术 生物特征识别系统性能环境影响的评价方法.
GB/T 41804-2022 is the Chinese standard "Information technology - Evaluation methodology for environmental influence in biometric system performance".
Its scope clause reads: This document specifies. ---Basic for planning and executing environmental assessment of biometric system performance based on scenario test methods and operational test methods Require; --- Specifications for defining, establishing and measuring specific conditions for evaluation, including requirements for equipment; --- establish provisions for benchmark performance to compare the effects of environmental parameters; --- Specifications for the evaluation of biometric identification systems, including requirements for test populations, test protocols, recorded data and test results; --- Steps to conduct a comprehensive evaluation.
This document does not apply to. --- For a specific biometric identification modality, the determination of analysis parameters (included in GB/T 29268.3-2012); --- Specify requirements for performing vulnerability analysis, modifying environmental factors (already included in ISO /IEC 19792); --- classify biometric identification systems according to their performance under different environmental conditions; ---Specify to determine the functional impact of environmental conditions on the hardware components of the biometric identification system (such as corrosion, electrical interference, damage, etc.) Require. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 41804-2022
National Standard of the People's Republic of China
- ICS
- 35.020
- Classification
- L 71
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Compliance
- 5 Summary
- 5.1 Overview
- 5.2 Scenario Evaluation
- 5.3 Operational Evaluation
- 6 Provisions for Evaluation Conditions
- 6.1 Overview
- 6.2 Definition of Evaluation Conditions
- 6.3 Selection of Evaluation Conditions
- 6.4 Measurement and recording of environmental conditions
- 7 Biometric Scenario Evaluation
- 7.1 General
- 7.2 Defining evaluation objectives
- 7.3 Environment
- 7.4 Test population
- 7.5 Environmental adaptability
- 7.6 Effort levels and decision-making strategies
- 7.7 Exception Handling Protocol
- 7.8 Data logging and test results
- 7.9 Execution sequence
- 8 Operational Evaluation
- 8.1 Overview
- 8.2 Environment
- 8.3 Test cycle
- 8.4 Data logging process
- 8.5 Performance Measurements
- 8.6 Counterfeit transactions
- 8.7 Reporting
- Appendix A (informative) Environmental parameter values
- Appendix B (Informative) Test Equipment
1 Scope
This document specifies.
---Basic for planning and executing environmental assessment of biometric system performance based on scenario test methods and operational test methods
Require;
--- Specifications for defining, establishing and measuring specific conditions for evaluation, including requirements for equipment;
--- establish provisions for benchmark performance to compare the effects of environmental parameters;
--- Specifications for the evaluation of biometric identification systems, including requirements for test populations, test protocols, recorded data and test results;
--- Steps to conduct a comprehensive evaluation.
This document does not apply to.
--- For a specific biometric identification modality, the determination of analysis parameters (included in GB/T 29268.3-2012);
--- Specify requirements for performing vulnerability analysis, modifying environmental factors (already included in ISO /IEC 19792);
--- classify biometric identification systems according to their performance under different environmental conditions;
---Specify to determine the functional impact of environmental conditions on the hardware components of the biometric identification system (such as corrosion, electrical interference, damage, etc.)
Require.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 29268.1-2012 Information Technology Biometrics Performance Testing and Reporting Part 1.Principles and Framework (ISO /
IEC 19795-1.2006, IDT)
ISO /IEC 19795-2 Information technology biometric performance testing and reporting - Part 2.Test methods for technology and scenario evaluation
Note. GB/T 29268.2-2012 Information Technology Biometric Recognition Performance Testing and Reporting Part 2.Test Methods for Technology and Scenario Evaluation (ISO /IEC 19795-2.2007, IDT)
ISO /IEC 19795-6 Information technology biometric performance testing and reporting - Part 6.Test methods for operational evaluation
3 Terms and Definitions
The terms and definitions defined in GB/T 29268.1-2012 and the following apply to this document.
GB/T 42443 | GB/T 40204 | GB/T 38663 | GB/T 41814.1 | GB/T 41803.1 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 44 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 29268.1-2012Information technology -- Biometric performance testing and reporting -- Part 1: Principles and framework
- GB/T 29268.2-2012Information technology -- Biometric performance testing and reporting -- Part 2: Testing methodologies for technology and scenario evaluation
IEC 19795
How to Download GB/T 41804-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 29268.1-2012 — Information technology -- Biometric performance testing and reporting -- Part 1: Principles and framework
GB/T 29268.2-2012 — Information technology -- Biometric performance testing and reporting -- Part 2: Testing methodologies for technology and scenario evaluation
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 41804-2022
$360.00