GB/T 41337-2022Additive manufacturing nickel-based alloy with powder bed fusion (English PDF)
粉末床熔融增材制造镍基合金
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41337-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41337-2022 is the English-translated version of 粉末床熔融增材制造镍基合金.
GB/T 41337-2022 is the Chinese national standard for the nickel-based alloy parts made by powder bed fusion.
It gives the technical requirements - the alloy and its composition, the chemical and mechanical properties of the built part, its density and internal soundness, the surface condition and the heat treatment - the test methods, the inspection rules, the provisions on marking, packaging, transport and storage, the accompanying documents and the contents of an order.
It applies to nickel-based alloy products made by powder bed fusion additive manufacturing. Printing shops, aerospace and energy buyers and their inspectors use it. Issued on 9 March 2022, it has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 41337-2022
National Standard of the People's Republic of China
- ICS
- 77.160
- Classification
- H 72
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Technical requirements
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage and storage, accompanying documents and the contents of the order form.
This document applies to nickel-based alloy products manufactured by powder bed fusion additive manufacturing processes.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 228.1 Tensile Test of Metallic Materials Part 1: Test Method at Room Temperature
GB/T 228.2 Tensile Test of Metallic Materials Part 2: High Temperature Test Method
GB/T 3500 Powder Metallurgy Terminology
GB/T 3850 Density Determination Method of Dense Sintered Metal Materials and Cemented Carbide
GB/T 7232 Metal Heat Treatment Process Terminology
GB/T 35351 Additive Manufacturing Terminology HB/Z61 Penetration Inspection HB5220 (all parts) Methods for chemical analysis of superalloys HB20160 X-ray photography inspection
3 Terms and Definitions
Terms and definitions defined in GB/T 3500, GB/T 7232, GB/T 35351 and ISO /ASTM52921 apply to this document.
4 Technical requirements
4.1 Supply Status
The supply state of the product is divided into the composition form, the annealed state, the hot isostatic pressing state and the heat treatment state. The buyer has special requirements for the supply status of the final formed parts When required, it shall be agreed upon by both parties, and shall be indicated in the order form.
4.2 Chemical composition
The chemical composition of the product should meet the requirements of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 228.2Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature
- GB/T 3500Powder metallurgy -- Vocabulary
- GB/T 3850Impermeable sintered metal materials and hard metals -- Determination of density
- GB/T 7232Metal heat treatment - Terminology
- GB/T 35351Additive manufacturing - Terminology
Similar standards
How to Download GB/T 41337-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 228.1-2021 — Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
GB/T 228.2-2015 — Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature
GB/T 3500-2008 — Powder metallurgy -- Vocabulary
Secure payment via Stripe
Payments accepted
GB/T 41337-2022
$105.00