GB/T 41101.2-2021Earth-moving machinery - Sustainability - Part 2: Remanufacturing (English PDF)

1 Scope

This document defines the terms and definitions of earthmoving machinery remanufactured parts, specifies the technological process and requirements, and provides relevant information:

This document is applicable to the remanufacturing of reusable parts of earth-moving machinery as defined in ISO 6165, and non-road machinery can also be used for reference:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document:

ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes-

Identificationandtermsanddefinitions)

Note: GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165:2012, IDT)

ISO 10987 Earth-moving machinery sustainability terms, sustainability factors and reporting (Earth-movingmachinery-Sus- tainability-Terminology,sustainabilityfactorsandreporting)

Note: GB/T 41101:1-2021 Earthmoving Machinery Sustainability Part 1: Terminology, Sustainability Factors and Reporting (ISO 10987:2012, IDT)

ISO 16714 Terminology and calculation methods for reusability and recyclability of earth-moving machinery (Earth-movingmachinery-

Recyclabilityandrecoverability-Terminologyandcalculationmethod)

Note: GB/T 30964-2014 Terminology and calculation methods for reusability and recyclability of earthmoving machinery (ISO 16714:2008, IDT)

3 Terms and Definitions

Terms and definitions defined by ISO 6165, ISO 10987 and ISO 16714 and the following terms and definitions apply to this document:

Note: Appendix A provides additional general terms and definitions:

ISO and IEC maintain terminology databases for standardization at the following addresses:

---IEC Electronic Encyclopedia: http://www:electropedia:org

---ISO online browsing platform: http://www:iso:org/obp

3:1

Remanufactured blank core

Has completed its useful life by disposing of parts that can be reused:

NOTE: Remanufactured blanks have economic value, not scrap:

3:2

Remanufacturing

By the original equipment manufacturer (3:10), cooperative units or authorized units, sold worn or expired parts as remanufactured gross

Blank (3:1), a manufacturing process that achieves quality and performance "like new" or "better than new":

NOTE: This definition differs from the definitions in ISO 10987 and ISO 16714: […]