GB/T 41058-2021Methods for detecting heavy metals in sludge and contaminated soil for cement kiln coprocessing (English PDF)
水泥窑协同处置污泥及污染土中重金属的检测方法
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41058-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 41058-2021 is the English-translated version of 水泥窑协同处置污泥及污染土中重金属的检测方法.
GB/T 41058-2021 is the Chinese national method for determining heavy metals in sludge and contaminated soil that are co-processed in cement kilns.
It covers lead, chromium, cadmium, copper, nickel, barium, zinc, manganese, strontium, arsenic, mercury, cobalt, vanadium and antimony, measured by inductively coupled plasma emission spectrometry, graphite furnace or flame atomic absorption spectrophotometry, atomic fluorescence spectrometry and, for mercury, catalytic pyrolysis-cold atomic absorption spectrophotometry.
Where an element has a benchmark method, that method prevails in a dispute. The document also sets the basic test rules, such as two determinations averaged and a blank test, together with the reagents, instruments, preparation of samples and test solutions, and the method detection limits.
Cement plants and testing laboratories use it for these materials. It was issued on 31 December 2021 and has applied since 1 July 2022.
Found what you need?
Document preview — GB/T 41058-2021
National Standard of the People's Republic of China
- ICS
- 91.100.10
- Classification
- Q 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Basic requirements for the test
- 5 Reagents and Materials
- 6 Instruments and equipment
- 7 Preparation of samples
- 8 Preparation of test solution
- 9 Determination of lead, chromium, cadmium, copper, nickel, barium, zinc, manganese, strontium, arsenic, mercury, cobalt, vanadium, antimony by inductively coupled plasma emission spectrometry
- 10 Determination of lead, chromium, cadmium, copper, nickel, barium by graphite furnace atomic absorption spectrophotometry
- 11 Determination of lead, chromium, cadmium, copper, nickel, barium, zinc, manganese, strontium by flame atomic absorption spectrophotometry
- 12 Determination of Arsenic and Mercury by Atomic Fluorescence Spectrometry
- 13 Determination of Mercury by Catalytic Pyrolysis-Cold Atomic Absorption Spectrophotometry (Benchmark Method)
- 14 Method detection limit
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the co-processing of heavy metals (including lead, chromium, cadmium, copper, nickel, barium, zinc, manganese, strontium, arsenic, mercury, Methods for the determination of cobalt, vanadium and antimony). If an element is marked with a benchmark method, the benchmark method shall prevail in the event of a dispute.
This document is applicable to the detection of heavy metals in cement kiln co-processing sludge and contaminated soil and other materials designated to use this document.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analysis Laboratory Water Specifications and Test Methods
GB/T 8170 Numerical Rounding Rules and Representation and Judgment of Limit Values
JJG196 Verification Regulations for Commonly Used Glass Measuring Instruments
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Sludge
Semi-solid or solid substances produced during sewage treatment.
3.2 Contaminated soil
Due to the unorganized discharge of waste or the failure of the discharge system, it penetrates into the soil layer, resulting in changes in the physical, mechanical and chemical properties of the soil.
Soil that directly affects engineering activities or is harmful to human health, animal reproduction, and plant growth.
4 Basic requirements for the test
4.1 Test times and requirements
The number of tests for each measurement is specified as twice, and the average value of the two test results is used to represent the test results.
4.2 Blank test
Without adding the sample, in accordance with the same test conditions, the obtained measurement results are corrected.
4.3 Representation of Mass, Volume and Results
The mass is expressed in grams (g), accurate to 0.0001g. The volume of pipettes and volumetric flasks is expressed in milliliters (mL), in line with A of JJG196
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 41058-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-1987 — Rules for rounding off of numerical values
GB/T 41058-2021
$330.00