GB/T 39515.4-2020Agricultural and forestry machinery. Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (English PDF)

Foreword

GB/T 39515 "Environmental Requirements for Agricultural and Forestry Machinery Sprayers" is divided into 4 parts:

---Part 1: General requirements;

---Part 2: Horizontal boom sprayer;

---Part 3: Sprayers for shrubs and trees crops;

---Part 4: Stationary and semi-mobile sprayers:

This part is Part 4 of GB/T 39515:

This section was drafted in accordance with the rules given in GB/T 1:1-2009:

The translation method used in this part is equivalent to ISO 16119-4:2014 Environmental Requirements for Agricultural and Forestry Machinery Sprayers Part 4: Stationary

And semi-mobile sprayer:

The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows:

---GB 10395:6-2006 Agricultural and forestry tractors and machinery safety technical requirements Part 6: Plant protection machinery

(ISO 4254-6:1995,MOD)

---GB/T 10610-2009 Product Geometric Technical Specification (GPS) Surface structure profile method to evaluate the rules of surface structure

And method (ISO 4288:1996, IDT)

---GB/T 18520-2001 Plant protection mechanical sprayer nozzle and pressure gauge connection size (eqvISO 8169:

1984)

---GB/T 18675-2002 Determination of total residual liquid volume of agricultural sprayers for plant protection machinery (idtISO 13440:1996)

---GB/T 18678-2002 Plant protection machinery, agricultural sprayer (apparatus), the rated capacity of the liquid tank and the diameter of the filling hole (eqv

ISO 9357:1990)

---GB/T 19792-2012 Agricultural irrigation equipment, hydraulic fertilizer-pesticide injection pump (ISO 13457:2008, MOD)

---GB/T 20084-2006 Plant protection mechanical sprayer connection thread (ISO 4102:1984, MOD)

---GB/T 20085-2006 Plant protection machinery vocabulary (ISO 5681:1992, MOD)

---GB/T 20183:1-2006 Plant protection machinery spray equipment Part 1: Sprayer nozzle test method

(ISO 5682-1:1996, IDT)

---GB/T 20183:2-2006 Plant protection machinery spraying equipment Part 2: Hydraulic sprayer test method

(ISO 5682-2:1997, IDT)

---GB/T 20183:3-2006 Plant protection machinery spray equipment Part 3: Agricultural hydraulic sprayer liquid application per hectare

Regulation system test method (ISO 5682-3:1996, IDT)

---GB/T 24679:2-2020 Plant protection machinery knapsack sprayer Part 2: Safety and environmental requirements

(ISO :19932-1:2013, MOD)

---GB/T 24683-2009 Plant protection machinery, test method of air blower for bush and tree crops

(ISO 9898:2000, IDT)

---GB/T 24684:1-2009 Plant protection machinery evaluation cleaning system test method part 1: sprayer machine

Internal cleaning (ISO 22368-1:2004, IDT)

---GB/T 24684:3-2009 Plant protection machinery evaluation cleaning system test method Part 3: The inside of the chemical tank

Cleaning (ISO 22368-3:2004, IDT)

---GB/T 32242:1-2015 Plant protection mechanical inhalation dosing device Part 1: Test method (ISO 21278-1:

2008, MOD)

---GB/T 32242:2-2015 Plant protection mechanical inhalation dosing device Part 2: General requirements and performance limits

(ISO 21278-2:2008,MOD)

This part was proposed by China Machinery Industry Federation:

This part is under the jurisdiction of the National Agricultural Machinery Standardization Technical Committee (SAC/TC201):

Drafting organizations of this section: Jiangsu University, Chinese Academy of Agricultural Mechanization Sciences, Nanjing Institute of Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Thailand

State Yingtian Agricultural Machinery Manufacturing Co:, Ltd:, Agricultural Machinery Test and Appraisal Station of the Ministry of Agriculture and Rural Affairs:

Introduction

The technical requirements of this part of GB/T 39515 are based on the test methods given in ISO 5682-2:1997: This standard is mainly used for

Hydraulic sprayer: For other types of sprayers, other test methods and/or test standards that may be required are the basis of GB/T 39515:

Part of the subject of future survey/revision:

This part is a Type C standard specified by ISO 12100:

This section points out the machinery-related hazards, dangerous states, dangerous events and their scope covered:

When the provisions of Type C standards are different from those of Type A or Type B standards as the basis, the provisions of Type C standards take precedence over those of other standards:

It is stipulated that the design and manufacture of machinery and tools shall follow the provisions of the Class C standard:

Environmental requirements for agricultural and forestry machinery sprayers

Part 4: Stationary and semi-mobile sprayers

1 Scope

This part of GB/T 39515 specifies the use of stationary and semi-mobile sprayers (see definitions in 3:1 and 3:2) (including manufacturing

Manufacturers can foresee misuse) the technical requirements and verification methods to minimize the potential risk of environmental pollution:

This spray system is usually composed of independent components (main tank, pump and spraying device) assembled on a fixed device (fixed spray

Machine) or on a mobile device (semi-mobile sprayer):

This section does not apply to sprayers used for the treatment of confined spaces:

This part is used in conjunction with GB/T 39515:1 which specifies general requirements for the design and performance of various sprayers: As specified in this section

The requirements are different from those specified in GB/T 39515:1, and sprayers that fall within the scope of this section have priority to follow the provisions of this section: this

The part does not contain safety aspects: For safety requirements, see ISO 4254-6:

This section does not apply to sprayers manufactured before the release date:

2 Normative references

The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this document.

Pieces: For undated references, the latest version (including all amendments) applies to this document:

GB/T 39515:1-2020 Environmental requirements for agricultural and forestry machinery sprayers Part 1: General requirements (ISO 16119-1:2013,

IDT)

ISO 4102:1984 Plant protection mechanical sprayer connection thread (Equipmentforcropprotection-Sprayers-

Connectionthreading)

ISO 4254-6:2009 Safety of Agricultural Machinery Part 6: Sprayers and Liquid Fertilizers (Agriculturalmachinery-

Safety-Part 6: Sprayersandliquidfertilizerdistributors)

ISO 4288:1996 Product Geometric Technical Specification (GPS) Surface structure profile method for evaluating surface structure rules and methods

(GeometricalProductSpecifications(GPS)-Surfacetexture:Profilemethod-Rulesandprocedures

fortheassessmentofsurfacetexture)

ISO 5681 Plant Protection Machinery Vocabulary (Equipmentforcropprotection-Vocabulary)

ISO 5682-1:1996 Plant protection machinery spray equipment Part 1: Sprayer nozzle test method (Equipmentfor

cropprotection-Sprayingequipment-Part 1:Testmethodsforsprayernozzles)

ISO 5682-2:1997 Plant protection machinery spraying equipment Part 2: Hydraulic sprayer test method (Equipmentfor

cropprotection-Sprayingequipment-Part 2:Testmethodsforhydraulicsprayers)

ISO 5682-3:1996 Plant protection machinery spray equipment-Part 3: Agricultural hydraulic sprayer per hectare adjustment system

Test method (Equipmentforcropprotection-Sprayingequipment-Part 3:Testmethodforvolume/hec-

tareadjustmentsystemsofagriculturalhydraulicpressuresprayers)

ISO 8169:1984 Plant protection mechanical sprayer nozzle and pressure gauge connection size (Equipmentforcropprotec-

tion-Sprayers-Connectingdimensionsfornozzlesandmanometers)

ISO 9357:1990 Plant protection machinery, agricultural sprayer (apparatus), the rated capacity of the chemical tank and the diameter of the filling hole (Equipment

forcropprotection-Agriculturalsprayers-Tanknominalvolumeandfilingholediameter)