GB/T 39359-2020Integrating sphere method for the test of liquid/solid suspended photocatalytic hydrogen production reaction (English PDF)
积分球法测量悬浮式液固光催化制氢反应
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39359-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 19, 2020
Implementation date
June 1, 2021
Scope
GB/T 39359-2020 is the English-translated version of 积分球法测量悬浮式液固光催化制氢反应.
GB/T 39359-2020 fixes the integrating sphere method for measuring the quantum efficiency of suspension liquid-solid photocatalytic hydrogen production reaction systems, and specifies the test system, the measurement content, the test requirements and the data and calculation requirements for it.
Clause 1 states that it applies to the accurate measurement of the spectral absorption characteristics and of the quantum efficiency of hydrogen production in liquid-solid suspension solar photocatalytic hydrogen production reaction systems.
The body runs Scope, Normative references, Terms and definitions, Symbol, Test system, Measurement content, Test requirements and Data and calculation, with three appendices: the basic principles of the optical integrating sphere and a test case, both informative, and a normative appendix on the integrating sphere photocatalytic hydrogen production reaction measurement system.
Clause 2 cites GB/T 8981, GB/T 26179, GB/T 26915 and JC/T 185.
Clause 3 defines the integrating sphere as a hollow sphere for optical measurement whose inner surface is uniformly coated with a highly reflective diffuse medium without wavelength selectivity, so that the irradiance is equal in either direction, and the photocatalytic reaction medium as the medium of the suspension photocatalytic reaction, generally pure water or an aqueous solution.
It then defines three further effects: the self-degradation hydrogen production effect, where the reaction medium itself produces hydrogen under incident light with no catalyst added; the mechanical catalytic hydrogen production effect, where the medium and the photocatalyst produce hydrogen by mechanical means such as stirring without light; and the photothermal catalytic hydrogen production effect, obtained in the spectral section outside the intrinsic absorption of the photocatalyst and the characteristic absorption of the reaction medium, or under modulated incident light.
The draft on the page ends with that clause, so the test system, measurement content and calculation clauses themselves are not shown.
The standard was proposed and is managed by the National Hydrogen Energy Standardization Technical Committee (SAC/TC309); the page gives ICS 27.010 and the Chinese classification F19 and traces it to National Standard Announcement No. 26 of 2020. It was issued on 2020-11-19 and has applied since 2021-06-01.
Found what you need?
Document preview — GB/T 39359-2020
National Standard of the People's Republic of China
- ICS
- 27.010
- Classification
- F 19
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbol
- 5 Test system
- 6 Measurement content
- 7 Test requirements
- 8 Data and calculation
- Appendix A (informative appendix) Basic principles of optical integrating sphere
- Appendix B (Normative Appendix) Integrating sphere photocatalytic hydrogen production reaction measurement system
- Appendix C (informative appendix) "Integrating sphere method to measure the reaction efficiency of suspended liquid-solid photocatalytic hydrogen production" test case
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the testing system, measurement content, and test for measuring the quantum efficiency of the suspension liquid-solid photocatalytic hydrogen production reaction system by the integrating sphere method. Requirements, data and calculation requirements.
This standard applies to the accuracy of the spectral absorption characteristics and the quantum efficiency of hydrogen production in the liquid-solid suspension solar photocatalytic hydrogen production reaction system. measuring.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this file. For undated references, the latest version (including all amendments) applies to this document.
GB/T 8981 Determination of trace hydrogen in gas gas chromatography
GB/T 26179 Spectral radiometric measurement of light source
GB/T 26915 Calculation of Energy Conversion Efficiency and Quantum Yield of Solar Photocatalytic Hydrogen Production System
JC/T 185 Optical Quartz Glass
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Integrating sphere
Hollow sphere for optical measurement. The inner surface of the ball is uniformly coated with a diffuse reflective medium with high reflectivity and no wavelength selectivity. The irradiance in either direction is equal.
Note: Refer to Appendix A for the basic principle of optical integrating sphere.
3.2 Photocatalytic reaction medium
The medium for the suspension photocatalytic reaction is generally pure water or aqueous solution.
3.3 Self-degradation hydrogen production effect
In the process of photocatalytic hydrogen production, when no catalyst is added, the reaction medium reacts to produce hydrogen under incident light irradiation.
3.4 Mechanical catalytic hydrogen production effect
The reaction medium and photocatalyst produce the effect of hydrogen through mechanical means such as stirring under the condition of no light.
3.5 Photothermal catalytic hydrogen production effect
Select the spectral section other than the intrinsic absorption of the photocatalyst and the characteristic absorption of the reaction medium, and the incident light power and the similar incident light Irradiate under cloth characteristics, or use modulated incident light irradiation to produce the effect of hydrogen.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8981Determination of trace hydrogen in gases - Gas chromatographic method
- GB/T 26179The Spectro radiometric measurement of light sources
- GB/T 26915Determination of energy conversion efficiency and quantum yield for hydrogen production in the solar photocatalytic water splitting system
JC/T 185
Similar standards
How to Download GB/T 39359-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 26179-2010 — The Spectro radiometric measurement of light sources
GB/T 26915-2011 — Determination of energy conversion efficiency and quantum yield for hydrogen production in the solar photocatalytic water splitting system
GB/T 8981-2008 — Determination of trace hydrogen in gases - Gas chromatographic method
Secure payment via Stripe
Payments accepted
GB/T 39359-2020
$240.00