Valid

GB/T 39187-2020Jack up conductor/blow out preventer tension compensation system (English PDF)

自升式平台隔水管/防喷器张力补偿系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 39187-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2020

Implementation date

May 1, 2021

Scope

GB/T 39187-2020 is the English-translated version of 自升式平台隔水管/防喷器张力补偿系统.

GB/T 39187-2020 is the Chinese standard "Jack up conductor/blow out preventer tension compensation system".

Its scope clause reads: This standard specifies the classification, composition, and composition of the tension compensation system for jack-up platform riser/blowout preventer (hereinafter referred to as “tension compensation system”) Marking, requirements, test methods, inspection rules, signs, packaging, transportation and storage.

This standard applies to the design, manufacture and acceptance of tension compensation systems.

Found what you need?

Document preview — GB/T 39187-2020

National Standard of the People's Republic of China

ICS: 47.020.20
Classification: U 35

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification, composition and marking
4.1 Classification and composition
4.2 Product marking and outline drawing
5 Requirements
5.1 Design
5.2 Material
5.3 Welding
5.4 Appearance
5.5 Performance
5.6 Dimensional tolerance and weight
5.7 Enclosure protection
5.8 Security
5.9 Environmental adaptability
5.10 Electromagnetic compatibility
6 Test method
6.1 Welding
6.2 Appearance
6.3 Performance
6.4 Dimensional tolerance and weight
6.5 Shell protection
6.6 Security
6.7 Environmental adaptability
6.8 Electromagnetic compatibility
7 Inspection rules
7.1 Inspection classification
7.2 Type inspection
7.3 Factory inspection
8 Marking, packaging, transportation and storage
8.1 Sign
8.2 Packaging
8.3 Transportation
8.4 Storage
Appendix A (informative appendix) Technical conditions agreed upon between the supplier and the purchaser

1 Scope

This standard specifies the classification, composition, and composition of the tension compensation system for jack-up platform riser/blowout preventer (hereinafter referred to as “tension compensation system”)

Marking, requirements, test methods, inspection rules, signs, packaging, transportation and storage.

This standard applies to the design, manufacture and acceptance of tension compensation systems.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.

For undated references, the latest version (including all amendments) applies to this document.

GB/T 191 Packaging, Storage and Transportation Graphic Mark

GB/T 712-2011 Structural steel for ships and marine engineering

GB/T 1720-1979 Determination of paint film adhesion

GB/T 1804-2000 General Tolerance Tolerance of linear and angular dimensions without tolerance

GB 3836.1 Explosive environment Part 1.General requirements for equipment

GB/T 4208-2017 Enclosure protection grade (IP code)

GB/T 5099 (all parts) seamless steel gas cylinder

GB/T 6388 Transport packaging receiving and dispatching signs

GB/T 7826 System Reliability Analysis Technology Failure Mode and Effect Analysis (FMFA) Procedure

GB/T 8163-2018 Seamless steel pipe for conveying fluid

GB/T 8918 Wire Rope for Important Use

GB/T 10250-2007 Electromagnetic compatibility of marine electrical and electronic equipment

GB/T 13306 signs

GB/T 13342 General technical conditions for marine reciprocating hydraulic cylinders

GB/T 14039-2002 Code of pollution grade of solid particles in hydraulic transmission oil

GB/T 14736 Technical conditions for the use of lifting rings for port handling

GB/T 14976-2012 Stainless steel seamless steel pipe for fluid transportation

GB/T 20663 Energy storage pressure vessel

GB/T 25133 Hydraulic system assembly pipeline flushing method

GB/T 25444 (all parts) Electrical installations for mobile and fixed offshore installations

GB/T 25854 D-shaped and bow-shaped forged shackles for general lifting

GB/T 30507 Guidelines for sampling and cleanliness determination of particulate pollutants in lubricating oil systems and hydraulic oil systems for ships and marine technology

GB/T 30790.5 Paint and varnish protective coating system for corrosion protection of steel structures Part 5.Protective coating system

GB/T 31415 Paints and varnishes performance requirements for protective coating systems for marine buildings and related structures

GB/T 32474 Rubber hoses and hose assemblies for oil drilling well control equipment

GB/T 33145 Large-volume steel seamless gas cylinder

CB/T 1102 General technical conditions for marine hydraulic systems

CB1146.2 Environmental testing and engineering guidelines for naval equipment […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 3836.1 · GB/T 5099 · GB/T 8918 · GB/T 25444 · CB/T 1102 · CB 1146.2

Similar standards

GB/T 11038-2026|GB/T 25017-2026|GB/T 25018-2026|GB/T 47317-2026|GB/T 47707-2026|GB/T 47709-2026

How to Download GB/T 39187-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.