Valid

GB/T 38095-2019Determination of docosahexaenoic acid and eicosapentaenoic acid content—Gas chromatography (English PDF)

DHA、EPA含量测定 气相色谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38095-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

October 18, 2019

Scope

GB/T 38095-2019 is the English-translated version of DHA、EPA含量测定 气相色谱法.

GB/T 38095-2019 is the Chinese standard "Determination of docosahexaenoic acid and eicosapentaenoic acid content - Gas chromatography". Its scope clause reads: This standard specifies the method for the determination of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) content by gas chromatography.

This standard is applicable to the determination of DHA and EPA content in fish oil and microalgae. This standard does not apply to the determination of ethyl-esterified fish oil.

The detection limit of this method is 10 mg/kg, and the quantification limit is 33 mg/kg. Its clauses include principles; reagents or materials; instruments and equipment; test steps; result analysis; repeatability.

It was issued by the State Administration for Market Regulation on OCTOBER 18, 2019 and took effect on OCTOBER 18, 2019.

Found what you need?

Document preview — GB/T 38095-2019

National Standard of the People's Republic of China

ICS
07.080
Classification
A 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Principles4
  • 4 Reagents or materials4
  • 5 Instruments and equipment5
  • 6 Test steps5
  • 7 Result analysis7
  • 8 Repeatability8
  • Appendix A (Informative) Standard chromatogram of DHA, EPA, and heptadecanoic acid9

1 Scope

This standard specifies the method for the determination of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) content by gas chromatography.

This standard is applicable to the determination of DHA and EPA content in fish oil and microalgae.

This standard does not apply to the determination of ethyl-esterified fish oil.

The detection limit of this method is 10 mg/kg, and the quantification limit is 33 mg/kg.

2 Normative references

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard.

GB/T 6682 Water for analytical laboratory use. Specification and test methods

3 Principles

After extracting oil from the sample by chloroform-methanol method, methyl-esterify the sample and separate it with a gas chromatographic capillary column; then, inspect it with a hydrogen flame ionization detector and quantify it by the internal standard method.

4 Reagents or materials

Unless otherwise specified, only analytical reagents are used.

4.1 Water: Grade 1 specified in GB/T 6682.

4.2 Methanol: chromatographically pure.

4.3 N-hexane: chromatographically pure

Microalgae: Weigh 10.00 g of microalgae and grind, then weigh 1.00 g of uniform sample, which will be used for the extraction of oil. Fish oil: take 0.1000 g.

6 Test steps

6.2 Extraction

Take 1.00 g of microalgae dry powder sample, and put it into a 50 mL polytetrafluoroethylene test tube; add 6.0 mL of distilled water, add 22.5 mL of chloroform-methanol (1:2, volume ratio) mixed solution, shake and mix well; then, disrupt it with an ultrasonic cell disruptor for 2 min, add 7.5 mL of chloroform, shake and mix for 30 s; add 7.5 mL of distilled water, shake and mix for 30 s. Transfer the mixture to a separatory funnel, let it be standing and layering, and separate the oil layer; then, dry it in a vacuum, weigh it and calculate the oil content.

6.3 Fatty acid methyl esterification

Weigh 0.10 g of the oil sample, and put it into a 10 mL centrifuge tube with a lid; add 2 mL of ether-n-hexane (2:1, volume ratio) mixture, and shake well; 15 min later, add 2 mL of 0.8 mol/L potassium hydroxide-methanol solution, shake well, and let it react in a constant temperature water bath at 60 °C for 15 min; then, add water along the wall to the 10 mL mark, and let it be standing and layering; transfer all the supernatant to a measuring apparatus, dilute to 1 mL with n-hexane; dilute it by a certain multiple, and let it be injected and analyzed later.

6.4 Determination

6.4.1 Gas chromatography reference conditions

The gas chromatography reference conditions are as follows:

a) Chromatographic column: poly(dicyanopropyl siloxane) capillary column (0.32 mm×0.25 µm×30 m), or equivalent;

b) Carrier gas and flow rate: The carrier gas shall be nitrogen, and the flow rate shall be 1.5 mL/min;

c) Column temperature raising procedure: The initial temperature shall be 160 °C (hold for 3 min), then rise to 230 °C at a rate of 6 °C/min and hold for 15 min;

d) Injection port temperature: 250 °C;

e) Detector temperature: 280 °C;

f) Injection volume: 1 µL;

g) Injection method: split injection; split ratio shall be 50:1. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 38095-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38095-2019

$85.00