Valid

GB/T 38048.3-2019Surface cleaning appliances -- Part 3: Wet carpet cleaning appliances -- Methods for measuring the performance (English PDF)

表面清洁器具 第3部分:湿式地毯清洁器具 性能测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38048.3-2019 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

May 1, 2020

Scope

GB/T 38048.3-2019 is the English-translated version of 表面清洁器具 第3部分:湿式地毯清洁器具 性能测试方法.

GB/T 38048.3-2019 is the Chinese standard "Surface cleaning appliances -- Part 3: Wet carpet cleaning appliances -- Methods for measuring the performance". Its scope clause reads: This part of GB/T 38048 applies to wet cleaning appliances for household and similar cleaning carpets.

This section does not apply to steam cleaning Clean utensils. The purpose of this section is to. --- specifies the basic performance characteristics of wet cleaning appliances; --- Test methods describing these performance characteristics as well; --- Supplement to the test method of IEC 60312-1 dry vacuum cleaner.

Note. Due to environmental conditions, time changes, test materials and the level of operation, when conducting comparative tests at the same time, under the same laboratory conditions, Tests are performed by the same operator, and most of the test methods can obtain credible test results.

For safety requirements, see IEC 60335-1 and IEC 60335-2-2. Hard floor wet cleaning test methods are under consideration. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 38048.3-2019

National Standard of the People's Republic of China

ICS
97.080
Classification
Y 62

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General conditions of the test
  • 4.1 Environmental conditions
  • 4.2 Test equipment and materials
  • 4.3 Voltage and frequency
  • 4.4 Preheating of wet cleaning appliances and accessories
  • 4.5 Parts of wet cleaning appliances
  • 4.6 Operation of wet cleaning appliances
  • 4.7 Pre-test
  • 4.8 Indoor Reference Cleaning Appliance System
  • 5 cleaning test
  • 5.1 Dry cleaning test
  • 5.2 Wet cleaning test
  • 5.2.1 Wet cleaning effect on carpet
  • 5.2.1.1 General requirements
  • 5.2.1.2 Overview of the test process
  • 5.2.1.3 Step-by-step summary of the test process
  • 5.2.1.4 Determination of wet cleaning efficiency
  • 5.2.2 Recontamination
  • 5.2.3 Drying time
  • 5.2.4 Maximum volume of dust inhaled by the dust collector
  • 5.2.5 Maximum use volume of the dust collector suction liquid
  • 5.2.6 Maximum flow rate when cleaning liquids
  • 5.2.7 Maximum cleaning efficiency of contaminated liquid
  • 5.2.8 Wet cleaning of hard surfaces
  • 5.2.9 Wet cleaning of decorative items
  • 6 Other tests
  • 6.1 General requirements
  • 6.2 Movement resistance
  • 6.3 Life test
  • 6.4 Quality
  • 6.5 Grip
  • 6.6 Provision of cleaning time
  • 6.7 size
  • 6.8 Noise level
  • 6.9 Energy consumption
  • 7 Test materials and equipment
  • 7.1 General requirements
  • 7.2 Test materials
  • 7.2.1 Synthetic pollutants
  • 7.2.2 Carpet size
  • 8 Instructions for use
  • Appendix A (informative) Material Information
  • Appendix B (informative) Product sales information

1 Scope

This part of GB/T 38048 applies to wet cleaning appliances for household and similar cleaning carpets. This section does not apply to steam cleaning

Clean utensils.

The purpose of this section is to.

--- specifies the basic performance characteristics of wet cleaning appliances;

--- Test methods describing these performance characteristics as well;

--- Supplement to the test method of IEC 60312-1 dry vacuum cleaner.

Note. Due to environmental conditions, time changes, test materials and the level of operation, when conducting comparative tests at the same time, under the same laboratory conditions,

Tests are performed by the same operator, and most of the test methods can obtain credible test results.

For safety requirements, see IEC 60335-1 and IEC 60335-2-2.

Hard floor wet cleaning test methods are under consideration.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Household vacuum cleaners - Part 1. Dry vacuum cleaner performance test method (Vacuumcleanersfor householduse-Part 1.Dryvacuumcleaners-Methodsformeasuringtheperformance)

Standard atmospheric specifications for ISO 554 conditioning and/or testing (Standardatmospheresforconditioningand/ortes- ting-Specifications)

ASTMF 2828-12 Standard test for assessing carpet cleaning efficiency based on visible surface changes when cleaning with a wet dust removal cleaning system

Method (Standardtestmethodforassessingcarpetcleaningeffectivenessintermsofvisualappearance

Changewhencleanedwithawetextractioncleaningsystem)

Standard Test Method for Accelerated Contamination of ASTMD6540 Pile Yarn Floor Covers (Standardtestmethodforacceler-

Eatedsoilingofpileyarnfloorcovering)

AATCCTM122-2009 Carpet contamination. using standard pollution method (Carpetsoiling. servicesoilingmethod)

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Cleaning head

Passive nozzle, ground brush or power nozzle connected to the suction pipe, separate from the vacuum cleaner main unit or part of it, for vacuum cleaner

The part that cleans the surface.

[GB/T 20291.1-2014, definition 3.3] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 38048.3-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38048.3-2019

$235.00