GB/T 37869.2-2019Glass containers -- Vacuum lug finishes -- Part 2: 3 leads 33 medium (English PDF)

Foreword

GB/T 37869 "glass container vacuum flange bottle mouth" is divided into the following parts.

--- Part 1. General;

--- Part 2. Three-spindle 33 medium specification;

--- Part 3. Three-spin 38 general specifications;

--- Part 4. Three-spin 38 medium size;

--- Part 5. Four-rotation 43 and 48 common specifications;

--- Part 6. Four-rotor 53 and 58 common specifications;

--- Part 7. Four-rotation 58 deep specification;

--- Part 8. Four-rotation 63, 66 and 70 common specifications;

--- Part 9. Four-rotation 63, 66 and 70 deep specifications;

--- Part 10. Six-rotation 77 common specifications;

--- Part 11. Six-rotation 82 common specifications;

--- Part 12. Six-spin 89 common specifications;

--- Part 13. Six-rotation 100 common specifications;

--- Part 14. Eight-spin 110 general specifications.

This part is the second part of GB/T 37869.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This section uses the translation method equivalent to ISO 9100-2.2005 "glass container vacuum flange bottle mouth part 2. 33 medium

specification".

The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.

---GB/T 1804-2000 General tolerances No tolerances for linear and angular dimensions (eqvISO 2768-1.1989).

This section has made the following editorial changes.

--- According to the usage habits, the standard name was changed to "glass container vacuum flange bottle mouth part 2. three rotation 33 medium specification";

--- This section incorporates the technical errata content of ISO 9100-2.2005/Cor.1.2009, and the terms of these errata contents are

The vertical double line (||) in the outer margin of the margin is marked.

This part was proposed by the China Light Industry Federation.

This part is under the jurisdiction of the National Daily Glass Standardization Technical Committee (SAC/TC377).

This section drafted by. Donghua University, the national glasses glass enamel product quality supervision and inspection center, Pinghu City product quality supervision and inspection

, Shanghai glasses glass enamel product quality supervision and inspection station, the national daily glass enamel standardization center.

1 Scope

This part of GB/T 37869 specifies the dimensions of a 33mm medium gauge vacuum three-spiral flange finish for wide-mouth glass containers.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

ISO 2768-1 General tolerances Part 1. Tolerances for linear and angular dimensions without tolerances (Generaltolerances-Part 1.

Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications)

3 size