Valid

GB/T 37172-2018Test methods for access network equipment—Interoperability of EPON system (English PDF)

接入网设备测试方法 EPON系统互通性

Preview PDF

This is a limited preview

Buy now to download the full PDF (53 pages)

Need quotation for your management?

Get a formal quotation for GB/T 37172-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

April 1, 2019

Scope

GB/T 37172-2018 is the English-translated version of 接入网设备测试方法 EPON系统互通性.

GB/T 37172-2018 is the Chinese standard "Test methods for access network equipment—Interoperability of EPON system". Its scope clause reads: This standard specifies Ethernet-based passive optical networks [EPON1] with transmission rates of Gigabit (1G) and 10G (10G).

Unified interoperability testing methods, including EPON basic function interoperability, service bearer related function interoperability, operation management and maintenance functions General test method.

1) In this standard, 1G/1G-EPON is called 1G-EPON; 10G/1G-EPON and 10G/10G-EPON are collectively called 10G-EPON, 1G-EPON And 10G-EPON are collectively referred to as EPON.

This standard applies to EPON equipment in FTTH/FTTO scenarios. EPON equipment in the FTTB scenario can also be used for reference. Its clauses include abbreviations.

Found what you need?

Document preview — GB/T 37172-2018

National Standard of the People's Republic of China

ICS: 33.040.50
Classification: M 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Abbreviations
4 System Reference Configuration and Test Reference Point
4.1 EPON System Reference Configuration
4.2 EPON Interoperability Test Reference Point
5 EPON basic function interoperability test
5.1 Verification of MPCP frame format
5.2 Interoperability test for MPCP registration
5.3 Interoperability test of MPCP registration under the coexistence of 1G-EPONONU and 10G-EPONONU
5.4 FEC Interoperability Test
6 OAM Interoperability Test
6.1 Interoperability testing of standard OAM discovery processes
6.2 Extended Interoperability Testing of the OAM Discovery Process
6.3 Verification of standard OAM frame format
6.4 Extended Event Announcement Test
6.5 Management Object Instance Index TLV Test
6.6 Interoperability Testing for Extended OAM Attributes/Operations
6.7 Extended OAM Remote Management Interoperability Test Related to ONU Authentication
6.8 Extension of OAM Remote Management Interoperability Test Related to ONU Software Upgrade
6.9 Agitation-related extended OAM remote management interoperability test
6.10 Extended OAM-based ONUDBA parameters remote management interoperability test
6.11 Interoperability Test for Remote Query of ONU Device Configuration Information
7 Service bearer related function interoperability test
7.1 VLAN Interoperability Test
7.2 QoS Interworking Test
7.3 DBA interoperability testing
7.4 Interoperability Testing of ONU Authentication Functions
7.5 Stirring function interoperability test
7.6 Interoperability testing of optical link measurement and diagnostic functions of the ONU
7.7 User Access Line Identification Interworking Test
7.8 Interoperability test of abnormally illuminated ONU detection function
7.9 Interoperability Testing of Multicast Functions
7.10 Interoperability Test for Optical Link Protection Switching
7.11 ONU Software Remote Upgrade Interoperability Test
7.12 Alarm Interoperability Test
7.13 Performance Statistics Interoperability Test
7.14 ONU PON Port Energy-Saving Interoperability Test
7.15 Interoperability Testing of Voice Services
7.16 Interoperability Test for ONU Port Loop Detection

1 Scope

This standard specifies Ethernet-based passive optical networks [EPON1] with transmission rates of Gigabit (1G) and 10G (10G).

Unified interoperability testing methods, including EPON basic function interoperability, service bearer related function interoperability, operation management and maintenance functions

General test method.

1) In this standard, 1G/1G-EPON is called 1G-EPON; 10G/1G-EPON and 10G/10G-EPON are collectively called 10G-EPON, 1G-EPON And 10G-EPON are collectively referred to as EPON.

This standard applies to EPON equipment in FTTH/FTTO scenarios. EPON equipment in the FTTB scenario can also be used for reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 37081-2018 Access network technology requires 10Gbit/s Ethernet passive optical network (10G-EPON)

GB/T 37083-2018 Access network technology requires interoperability of EPON systems

YD/T 1292 Technical Requirements for Media Gateway Control Protocol Based on H.248

YD/T 1522.4 Session initiation protocol (SIP) technical requirements Part 4. SIP protocol based on softswitch network call control

YD/T 1522.5 Session initiation protocol (SIP) technical requirements Part 5. Unified SIP protocol for IMS networks

YD/T 2275 access network technology requires broadband user access line (port) identification

IEEE Standard Media Access Control Bridge for IEEE 802.1D LAN and Metropolitan Area Network [IEEE Standard for Localand metropolitanareanetworks-Mediaaccesscontrol(MAC)Bridges]

IEEE Standard Internet Protocol for IEEE 802.1Q LAN and Metropolitan Area Networks (IEEEStandard for Localand metropolitanareanetworks-VirtualBridgedLocalAreaNetworks)

IEEE802.3-2012 IEEE Ethernet standard (IEEEstandardforEthernet)

SFF-8077i 10Gb/s Small Pluggable Optical Transceiver (10GigabitSmalFormFactorPluggableModule)

Diagnostic Monitoring Interface Specification for SFF-8472 Optical Transceiver (DiagnosticMonitoringInterfaceforOpticalTransceiv-

Ers)

BBFTR-069Amendment2 CPEWAN Management Protocol Version 1.1 (CPEWANManagementProtocolv1.1)

3 Abbreviations

The following abbreviations apply to this document.

ASCII. American Standard Code for Information Interchange (AmericanStandardCodeforInformationInterchange)

BRAS. Broadband Remote Access Server (BroadbandRemoteAccessServer)

CIR. guaranteed bit rate (CommittedInformationRate)

DA. destination address (DestinationAddress)

DBA. Dynamic Bandwidth Alocation (DynamicBandwidthAlocation) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 53 pages — is available in the English PDF.

Referenced standards

Normative references

IEEE 802.1D · IEEE 802.1Q · IEEE 802.3-2012 · SFF-8077i · SFF-8472

How to Download GB/T 37172-2018

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.