GB/T 36992-2019Manual interdental brushes (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses the redrafting method to modify the use of ISO 16409.2006 "dental oral cleaning supplies manual interdental brush".

This standard has more structural adjustments than ISO 16409.2006. This standard and ISO 16409.2006 are listed in Appendix A.

The chapter number is compared to the list.

There are technical differences between this standard and ISO 16409.2006, and the terms involved in these differences have been passed on the outer margins of the margins.

The vertical single line (|) is marked, and a list of the corresponding technical differences and their causes is given in Appendix B.

This standard incorporates amendments to ISO 16409.2006/Amd.1.2010, and the provisions of these amendments have been adopted.

The vertical double line (||) of the side margin is marked.

This standard was proposed by the China Light Industry Association.

This standard is under the jurisdiction of the National Standardization Technical Committee for Oral Care Products (SAC/TC492).

This standard was drafted. Begajie Group Co., Ltd., Guangzhou Weimeizi Industrial Co., Ltd., Beijing Light Industry Product Quality Supervision

Inspection One Station, Ningbo Ao Lebi Oral Care Products Co., Ltd., Beijing Procter & Gamble Technology Co., Ltd., DuPont Xingda (Wuxi) Monofilament Co., Ltd.

Haolai Chemical (Zhongshan) Co., Ltd., Liangbianzhen (Jiangsu) Industrial Co., Ltd., Guangdong Meibang Daily Chemical Co., Ltd., Yangzhou Shuguang Toothbrush Factory, Ning

Poseidon Electric Co., Ltd., Guangdong Sanjiao Oral Health Industry Research Institute Co., Ltd., Wuxi Xingda Nylon Co., Ltd., Guangdong Xuejie Day

Chemical Products Co., Ltd., Jiangsu Xingsheng Brush Industry Co., Ltd.

1 Scope

This standard specifies the terms and definitions of manual interdental brush, product classification, requirements, test methods, inspection rules, marking, packaging, transportation and

Storage.

This standard applies to manual interdental brushes.

This standard does not apply to electric interdental brush and glue interdental brush.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 packaging storage and transportation icon

GB/T 2828.1-2012.Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches

plan

GB/T 2829-2002 Periodic inspection count sampling procedures and tables (applicable to the inspection of process stability)

GB 19342-2013 toothbrush

GB/T 22048 Determination of specific phthalate plasticizers in toys and children's products

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

Manual interdental brush manualinterdentalbrush

A device that is driven by hand and has a ray-like divergent brush on the trunk for cleaning the interdental space.

3.2

Interdental brushhead

A portion of a manual interdental brush that moves inside and outside the interdental to clean the interstitial surface.

Note. The brush head can be replaceable or non-replaceable, but should be fixed during use.

3.3

Interdental brush handle

A grip portion of a manual interdental brush for fixing the trunk.

3.4

Main stem

It consists of a wound metal wire that is used to hold the wire and support the part of the brush head.

3.5

Brush filament

a filament fixed to the trunk.