GB/T 36212-2018Non-destructive testing—Acoustic testing method and evaluation for the cement bond of underground metal component (English PDF)
无损检测 地下金属构件水泥防护层胶结声波检测及结果评价
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36212-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36212-2018 is the English-translated version of 无损检测 地下金属构件水泥防护层胶结声波检测及结果评价.
GB/T 36212-2018 sets out how to test, with sound waves, the bond between underground metal components and their cement protective layer, and how to evaluate the results.
It applies to the external cement layer around well-pipe metal components placed vertically underground to store compressed gas, with an inner diameter of 80 mm to 300 mm, and other underground metal components may refer to it.
The document covers the method summary, safety and personnel requirements, the detection system, the test procedure, the evaluation of results and the test record and report, with informative annexes on the method, on detection system performance and on comparative test tubes.
It defines well pipe, cement protective layer, first and second interface and the single-transmitter, dual-receiver acoustic method. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36212-2018
National Standard of the People's Republic of China
- ICS
- 19.100
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Method Summary
- 5 Safety requirements
- 6 personnel requirements
- 7 Test Procedure
- 8 detection system
- 9 Test procedure
- 10 Test result evaluation
- 11 Test records and reports
- Appendix A (informative) Summary of cement sound wave detection methods for underground metal components
- Appendix B (informative) Performance requirements for cemented acoustic wave detection system for underground metal components
- Appendix C (informative) Comparative test and comparative test tube requirements
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the sound wave detection method and results evaluation of the cement protective layer cementing of underground metal components.
This standard applies to the cement quality of the external cement protective layer of the well tubular metal component vertically placed underground for storage of compressed gas.
The sound wave detection method and the test result evaluation are applicable, and the applicable inner diameter of the member is 80 mm to 300 mm. Underground of other structures and specifications Metal components can also be referred to this standard.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 12604.1 Non-destructive testing terminology ultrasonic testing
GB/T 20737 General Terms and Definitions for Nondestructive Testing
3 Terms and definitions
GB/T 12604.1, GB/T 20737 and the following terms and definitions apply to this document.
3.1 Well pipe
A seamless steel pipe with external threads at both ends of a subterranean metal component.
3.2 Cement protective layer
The cement slurry is poured into the annular space between the underground metal member and the ground layer (or the outer well pipe), and the annular cement stone column formed after consolidation.
3.3 First interface
The cemented surface between the underground metal component and the cement protective layer.
3.4 Second interface
The cemented surface between the cement shield and the formation (or outer well).
3.5 Cement protective layer bonding acoustic wave detection
A method for automatically detecting the cementation quality of a cement protective layer by using a single-shot and double-receiving liquid immersion acoustic wave sensor.
Note: The transmitting sensor is used to continuously transmit acoustic signals, the short source receiving sensor is mainly used to receive well signals, and the long source receiving sensor is used to receive packets. Acoustic full wave trains including wellbore waves, formation waves and direct waves.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36212-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12604.1-1990 — Terminology for nondestructive testing--Ultrasonic testing
GB/T 12604.1-2005 — Non-destructive testing - Terminology - Terms used in ultrasonic testing
GB/T 12604.1-2020 — Non-destructive testing - Terminology - Ultrasonic testing
GB/T 36212-2018
$235.00