Valid

GB/T 36211.2-2018Intelligent measuring and control device in full-distributed industrial control system—Part 2:Communication interoperability test specification (English PDF)

全分布式工业控制智能测控装置 第2部分:通信互操作方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36211.2-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 14, 2018

Implementation date

December 1, 2018

Scope

GB/T 36211.2-2018 is the English-translated version of 全分布式工业控制智能测控装置 第2部分:通信互操作方法.

GB/T 36211.2-2018 is Part 2 of the Chinese national series on intelligent measuring and control devices for fully distributed industrial control systems, and it sets out how communication interoperability between such devices is achieved and assessed.

It describes the interoperability workflow and gives implementation methods for devices using the same protocol and for devices using different protocols, with request forwarding and data exchange gateways and the OPC UA, FDT and EDD approaches.

It then covers the assessment: planning the interoperability test, building the test environment around an independent gateway, a PLC gateway or EDD, running the test and grading functional compatibility, with a test example in Annex A. It applies to devices used in discrete manufacturing and the process industries. It was issued on 14 May 2018 and has applied since 1 December 2018.

Found what you need?

Document preview — GB/T 36211.2-2018

National Standard of the People's Republic of China

ICS
25.040
Classification
N 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions, abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Abbreviations
  • 4 Communication Interoperability Overview
  • 4.1 Overview
  • 4.2 Interoperability Workflow
  • 5 Communication Interoperability Implementation Method
  • 5.1 Communication Interoperability Implementation Method of the Same Protocol Device
  • 5.2 Communication Interoperability Implementation Method for Different Protocol Devices
  • 6 Interoperability assessment method
  • 6.1 Planning for Interoperability Testing
  • 6.2 Construction of an interoperable environment
  • 6.3 Interoperability test
  • 6.4 Interoperability assessment
  • Appendix A (informative) Interoperability Test Example
  • Reference

Foreword

GB/T 36211 "Full Distributed Industrial Control Intelligent Measurement and Control Device" is divided into 2 parts.

--- Part 1. General technical requirements;

--- Part 2. Communication Interoperability Method.

This part is the second part of GB/T 36211.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 36211 specifies the communication interoperability of the fully distributed industrial control intelligent measurement and control device (hereinafter referred to as the device). Methods and assessment methods.

This section applies to the fully distributed industrial control intelligent measurement and control device for discrete manufacturing and process industries.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 34064-2017 General Automation Equipment Profile Guide (IEC /T R62390.2005, IDT)

3 Terms and definitions, abbreviations

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1 Interoperability

Interoperability between the same version or different versions of the same protocol or different protocols.

3.1.2 Interoperability test

Check the interoperability between the same version or different versions of the same protocol or different protocols.

3.1.3 Device

A separate physical entity. The ability to perform one or more specified functions in a particular environment and separated by its interface. [GB/T 19769.1-2015, definition 3.30]

3.1.4 Field device

An entity that performs control, execution, and/or sensing functions and interfaces with other similar entities within the automation system.

3.1.5 Functional element

A software entity or a combination of hardware and software that enables device-specific functionality.

Note 1. The feature has an interface combined with other features and functions.

Note 2. The function can be formed by a function block, an object or a parameter table.

3.1.6 Function block

Software features that specify separate, named data structures and their associated operations.

Note: From GB/T 19769.1-2015.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 36211.2-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36211.2-2018

$235.00