GB/T 35830-2018Cleaning products—Determination of triclosan (English PDF)
洗涤用品 三氯生含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35830-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 6, 2018
Implementation date
September 1, 2018
Scope
GB/T 35830-2018 is the English-translated version of 洗涤用品 三氯生含量的测定.
GB/T 35830-2018 is the high performance liquid chromatography method for measuring triclosan in detergents.
The sample is dissolved in the mobile phase and extracted ultrasonically, and the filtered extract is analysed on an HPLC fitted with a UV or diode array detector; triclosan is identified by its retention time and quantified by the external standard method.
The standard lists the reagents, including chromatographic grade methanol and a triclosan reference of at least 99% purity made into a 1000 mg/L stock solution, the 0.45 µm filter, the analytical balance, the ultrasonic cleaner and a centrifuge of at least 4000 r/min.
It also fixes the sample preparation, with 0.5 g of liquid or cream or 0.2 g of solid product in a 25 mL flask, and the determination. It was issued on 6 February 2018 and has applied since 1 September 2018.
Found what you need?
Document preview — GB/T 35830-2018
National Standard of the People's Republic of China
- ICS
- 71.100.40
- Classification
- Y 43
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents and materials
- 5 Instruments and Equipment
- 6 Determination
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the HPLC method for the determination of triclosan in detergents.
This standard applies to the determination of triclosan in detergents.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 6682 Analysis Laboratory Water Specifications and Test Methods
3 Principle
The sample is dissolved in the mobile phase, ultrasonically extracted, and the extract is filtered to configure the UV detector or diode array detector for high efficiency Determination of liquid chromatography. According to the determination of the retention time of the measured components, quantification by external standard method.
4 Reagents and materials
Unless otherwise indicated, only analytically pure reagents and secondary water according to GB/T 6682 were used in the analysis.
4.1 Methanol. Chromatographically pure.
4.2 Triclosan (Triclosan, CAS. 3380-34-5, molecular formula. C12H7Cl3O2). Purity greater than or equal to 99%.
4.3 Triclosan stock solution. Precisely and accurately weigh 100mg triclosan (4.2), dissolve in methanol and make up to 100mL, formulated into a concentration A stock solution of 1000 mg/L was stored in a refrigerator at 4°C, and a standard solution was prepared according to the need to prepare a standard solution with appropriate concentration.
4.4 Filter. Organic, 0.45 µm.
5 Instruments and Equipment
5.1 HPLC. Equipped with a diode array or UV detector.
5.2 Analytical balance. The amount of sense is 0.1mg.
5.3 Ultrasonic cleaners.
5.4 Centrifuge. The speed is not less than 4000r/min.
6 Determination
6.1 Sample preparation
Weigh 0.5g of liquid or cream sample (solid sample 0.2g) (accurate to 1mg), place in a 25mL volumetric flask, add 15mL The mobile phase was extracted with ultrasound for 20 min, diluted with mobile phase to the mark and mixed. If the solution is cloudy, transfer the volume of the extracted solution to The tube was centrifuged at 4000r/min for 10 min. After centrifugation, the supernatant was filtered through a filter (4.4). The resulting filtrate was determined by high performance liquid chromatography.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 35830-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 35830-2018
$75.00