Valid

GB/T 35503-2017Reclaimed isobutene-isoprene (IIR) rubber -- Evaluation procedure (English PDF)

Preview PDF

Also coversGBT35503-2017

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35503-2017 in 30 minutes.

Issued by

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35503-2017 (Reclaimed isobutene-isoprene (IIR) rubber -- Evaluation procedure) is available as an English-translated PDF.

GB/T 35503-2017 — This standard specifies the evaluation of renewable isobutylene - Isoprene (IIR) rubber (referred to as "recycled butyl rubber") physical and chemical test side Method, standard materials for evaluation of vulcanizate properties, standard test formulations, equipment and operating procedures.

This standard applies to butyl rubber as the main body of waste tires, capsules, water tires, seals, corks and other rubber products department Separation of the system from the rubber.

Found what you need?

Document preview — GB/T 35503-2017

National Standard of the People's Republic of China

ICS
83.040.01
Classification
G 48

Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Sampling and sample preparation

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard uses redrafted Law Reference ISO/T S16096..2014 "Recycled isobutylene - isoprene (IIR) rubber evaluation method" series System, and ISO/T S16096..2014 degree of non-equivalent.

This standard proposed by the China Petroleum and Chemical Industry Federation.

This standard by the National Rubber and Rubber Products Standardization Technical Committee (SAC/TC35) centralized.

This standard was drafted. Fujian Branch of Central Chemical Rubber Group Co., Ltd., Fujian Province Institute of product quality inspection, Hangzhou Zhongce Rubber Limited, Xiamen Public Fergus Environmental Protection Technology Co., Ltd., Shenyang Rubber Research Institute Co., Ltd..

1 Scope

This standard specifies the evaluation of renewable isobutylene - Isoprene (IIR) rubber (referred to as "recycled butyl rubber") physical and chemical test side Method, standard materials for evaluation of vulcanizate properties, standard test formulations, equipment and operating procedures.

This standard applies to butyl rubber as the main body of waste tires, capsules, water tires, seals, corks and other rubber products department Separation of the system from the rubber.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Rubber, vulcanized or thermoplastic - Determination of tensile stress - strain properties GB/T GB/T 531.1 vulcanized rubber or thermoplastic rubber test methods into the hardness - Part 1. Shore Hardness Tester (Shore Hardness) GB/T 1232.1 unvulcanized rubber with a disk shear viscometer - Part 1. Determination of Mooney viscosity GB/T 2941 Rubbery physical test specimen preparation and conditioning procedures Rubber, solvent extraction Rubber ash - Determination - Part 1. Muffle furnace method GB/T 6038 rubber test compounding ingredients, mixing and curing equipment and operating procedures GB/T 7764 rubber identification infrared spectroscopy Rubber, vulcanized - Determination of GB/T 9869 disk oscillation vulcanization method GB/T 13460 general specification for recycled rubber GB/T 14837.1 Rubber and rubber products - Determination of components of vulcanized and unvulcanized rubber by thermogravimetry - Part 1. Butadiene Rubber, ethylene-propylene binary and ternary copolymers, isobutylene-isoprene rubber, isoprene rubber, styrene-butadiene rubber GB/T 15340 natural, synthetic raw gum sampling and sample preparation methods GB/T 25268 rubber vulcanizer user guide GB/T 29613.1 Rubber pyrolysis gas chromatographic analysis - Part 1. Identification of polymers (single and combined)

3 Terms and definitions

GB/T 13460 defined terms and definitions apply to this document.

4 Sampling and sample preparation

4.1 According to GB/T 15340 describes the method to take about 1.5kg laboratory samples.

4.2 Press GB/T 15340 preparation of test samples.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

How to Download GB/T 35503-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35503-2017

$145.00