Valid

GB/T 35484.3-2021Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 3: Telematics data (English PDF)

土方机械和移动式道路施工机械 工地数据交换 第3部分:远程信息处理数据

Preview PDF

This is a limited preview

Buy now to download the full PDF (118 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35484.3-2021 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 35484.3-2021 is the English-translated version of 土方机械和移动式道路施工机械 工地数据交换 第3部分:远程信息处理数据.

GB/T 35484.3-2021 is the Chinese standard "Earth-moving machinery and mobile road construction machinery - Worksite data exchange - Part 3: Telematics data".

Its scope clause reads: This document specifies the provision of mobile machine state data from a telematics provider's server to a third-party client application over a network: data communication scheme: Use of telematics data logging devices to collect data from mobile machines and store at telematics provider's services on the device: This document describes the communication records used to request data from the server and contains specific information used to analyze machine performance and health: The server response for the object: This document applies to mobile earth-moving machinery as defined in ISO 6165 and equipped with positioning and time instrumentation as defined in ISO 22242 mobile road construction machinery: This document does not apply to in-vehicle data collection, in-vehicle communication protocols (e:g: CAN bus) or moving after data has been collected by the logger Wireless transmission of machinery data to telematics provider servers (see Figure 1): Figure 1 Conceptual analysis diagram of a hybrid queue telematics system within the scope of this document.

Found what you need?

Document preview — GB/T 35484.3-2021

National Standard of the People's Republic of China

Classification
P 97

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions and Abbreviations
  • 4 Data management and access control
  • 5 Response Format
  • 6 XML declaration of link definition section
  • 7 Page
  • 8 Discoverability
  • 9 Date and time formats
  • 10 Data Field Summary
  • 11 Data Field Description
  • 12 Data Mode
  • 13 Syntax error
  • Appendix A (informative) Data relationship between this document and ISO 15143-
  • Appendix B (Informative) Data Support and Collection
  • Appendix C (Informative) Common Patterns
  • Appendix D (Informative) Time Series Patterns
  • Appendix E (normative) Process for adding new data elements to this document

1 Scope

This document specifies the provision of mobile machine state data from a telematics provider's server to a third-party client application over a network:

data communication scheme: Use of telematics data logging devices to collect data from mobile machines and store at telematics provider's services on the device: This document describes the communication records used to request data from the server and contains specific information used to analyze machine performance and health:

The server response for the object:

This document applies to mobile earth-moving machinery as defined in ISO 6165 and equipped with positioning and time instrumentation as defined in ISO 22242 mobile road construction machinery:

This document does not apply to in-vehicle data collection, in-vehicle communication protocols (e:g: CAN bus) or moving after data has been collected by the logger

Wireless transmission of machinery data to telematics provider servers (see Figure 1):

Figure 1 Conceptual analysis diagram of a hybrid queue telematics system within the scope of this document

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document:

ISO 3779 Road vehicle vehicle identification number (VIN) content and structure (Roadvehicles-Vehicleidentification number(VIN)-Contentandstructure)

ISO 6405-1 Symbols for earth-moving machinery driver controls and other display devices - Part 1: General symbols (Earth-

GB/T 44257.2 | GB/T 44257.1 | GB/T 41495 | GB/T 32543 | GB 48002 | GB/T 35484.2 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 118 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 3779 · ISO 6405

How to Download GB/T 35484.3-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
118 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35484.3-2021

$830.00